Ultra-high bandwidth, negligible latency and seamless communication for devices and applications are envisioned as major milestones that will revolutionize the way by which societies create, distribute and consume information. The remarkable expansion of wireless data traffic that we are witnessing recently has advocated the investigation of suitable regimes in the radio spectrum to satisfy users' escalating requirements and allow the development and exploitation of both massive capacity and massive connectivity of heterogeneous infrastructures. To this end, the Terahertz (THz) frequency band (0.1-10 THz) has received noticeable attention in the research community as an ideal choice for scenarios involving high-speed transmission. Particularly, with the evolution of technologies and devices, advancements in THz communication is bridging the gap between the millimeter wave (mmW) and optical frequency ranges. Moreover, the IEEE 802.15 suite of standards has been issued to shape regulatory frameworks that will enable innovation and provide a complete solution that crosses between wired and wireless boundaries at 100 Gbps. Nonetheless, despite the expediting progress witnessed in THz wireless research, the THz band is still considered one of the least probed frequency bands. As such, in this work, we present an up-to-date review paper to analyze the fundamental elements and mechanisms associated with the THz system architecture. THz generation methods are first addressed by highlighting the recent progress in the electronics, photonics as well as plasmonics technology. To complement the devices, we introduce the recent channel models available for indoor, outdoor as well as nanoscale propagation at THz band frequencies. A comprehensive comparison is then presented between the THz wireless communication and its other contenders by treating in depth the limitations associated with each communication technology. In addition, several applications of THz wireless communication are discussed taking into account the various length scales at which such applications occur. Further, as standardization is a fundamental aspect in regulating wireless communication systems, we highlight the milestones achieved regarding THz standardization activities. Finally, a future outlook is provided by presenting and envisaging several potential use cases and attempts to guide the deployment of the THz frequency band and mitigate the challenges related to high frequency transmission. ). Fig. 1. Wireless Roadmap Outlook up to the year 2035.
Abstract-Over the past years, carrier frequencies used for wireless communications have been increasing to meet bandwidth requirements. The engineering community witnessed the development of wide radio bands such as the millimeter-wave (mmW) frequencies to fulfill the explosive growth of mobile data demand and pave the way towards 5G networks. Other research interests have been steered towards optical wireless communication to allow higher data rates, improve physical security and avoid electromagnetic interference. Nevertheless, a paradigm change in the electromagnetic wireless world has been witnessed with the exploitation of the Terahertz (THz) frequency band (0.1-10 THz). With the dawn of THz technology, which fills the gap between radio and optical frequency ranges, ultimate promise is expected for the next generation of wireless networks. In this paper, the light is shed on a number of opportunities associated with the deployment of the THz wireless links. These opportunities offer a plethora of applications to meet the future communication requirements and satisfy the ever increasing user demand of higher data rates.
The purpose of this paper is to introduce a compact Ultra-Wideband (UWB) diversity antenna with a very low Envelope Correlation Coefficient (ECC). The design employs a hybrid isolation enhancing and miniaturization technique. The antenna consists of two counter facing monopoles, and is miniaturized by using not only inverted-L stubs but also a Complementary Split Ring Resonator (CSRR) on the ground plane. The added components enhance isolation and enable tighter packing of the antennas. The result is a very compact MIMO array with an overall size of 23 x 29 mm2, that covers the entire UWB spectrum from 3 GHz to 12 GHz, with mutual coupling lower than-15 dB. Moreover, the CSRR unit that acts as a resonator is applied for the first time to suppress the interference of RF currents flowing through the ground plane of this UWB MIMO/diversity antenna. The performance of the fabricated prototype in terms of scattering parameters, broadside (peak) gain, radiation patterns, efficiency and envelope correlation coefficient is presented and discussed
This article presents a novel design of portable planar microwave sensor for fast, accurate, and non-invasive monitoring of the blood glucose level as an effective technique for diabetes control and prevention. The proposed sensor design incorporates four cells of hexagonal-shaped complementary split ring resonators (CSRRs), arranged in a honey-cell configuration, and fabricated on a thin sheet of an FR4 dielectric substrate.The CSRR sensing elements are coupled via a planar microstrip-line to a radar board operating in the ISM band 2.4–2.5 GHz. The integrated sensor shows an impressive detection capability and a remarkable sensitivity of blood glucose levels (BGLs). The superior detection capability is attributed to the enhanced design of the CSRR sensing elements that expose the glucose samples to an intense interaction with the electromagnetic fields highly concentrated around the sensing region at the induced resonances. This feature enables the developed sensor to detect extremely delicate variations in the electromagnetic properties that characterize the varying-level glucose samples. The desired performance of the fabricated sensor is practically validated through in-vitro measurements using a convenient setup of Vector Network Analyzer (VNA) that records notable traces of frequency-shift responses when the sensor is loaded with samples of 70–120 mg/dL glucose concentrations. This is also demonstrated in the radar-driven prototype where the raw data collected at the radar receiving channel shows obvious patterns that reflect glucose-level variations. Furthermore, the differences in the sensor responses for tested glucose samples are quantified by applying the Principal Component Analysis (PCA) machine learning algorithm. The proposed sensor, beside its impressive detection capability of the diabetes-spectrum glucose levels, has several other favorable attributes including compact size, simple fabrication, affordable cost, non-ionizing nature, and minimum health risk or impact. Such attractive features promote the proposed sensor as a possible candidate for non-invasive glucose levels monitoring for diabetes as evidenced by the preliminary results from a proof-of-concept in-vivo experiment of tracking an individual’s BGL by placing his fingertip onto the sensor. The presented system is a developmental platform towards radar-driven wearable continuous BGL monitors.
Nanosized devices operating inside the human body open up new prospects in the healthcare domain. Invivo wireless nanosensor networks (iWNSNs) will result in a plethora of applications ranging from intrabody health-monitoring to drug-delivery systems. With the development of miniature plasmonic signal sources, antennas, and detectors, wireless communications among intrabody nanodevices will expectedly be enabled at both the terahertz band (0.1-10 THz) as well as optical frequencies (400-750 THz). This result motivates the analysis of the phenomena affecting the propagation of electromagnetic signals inside the human body. In this paper, a rigorous channel model for intrabody communication in iWNSNs is developed. The total path loss is computed by taking into account the combined effect of the spreading of the propagating wave, molecular absorption from human tissues, as well as scattering from both small and large body particles. The analytical results are validated by means of electromagnetic wave propagation simulations. Moreover, this paper provides the first framework necessitated for conducting link budget analysis between nanodevices operating within the human body. This analysis is performed by taking into account the transmitter power, medium path loss, and receiver sensitivity, where both the THz and photonic devices are considered. The overall attenuation model of intrabody THz and optical frequency propagation facilitates the accurate design and practical deployment of iWNSNs.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.