Visible near-infrared (Vis-NIR) reflection spectroscopy and mid-infrared (mid-IR) reflection spectroscopy are cost- and time-effective and environmentally friendly techniques that could be alternatives to conventional soil analysis methods. Successful determination of spectrally active soil components, including soil organic matter (SOM), depends on the selection of suitable pretreatment and multivariate calibration techniques. The objective of the present review is to critically examine the suitability of Vis-NIR (350–2500 nm) and mid-IR (4000–400 cm−1) spectroscopy as a tool for SOM quantity and quality determination. Particular attention is paid to different pretreatment and calibration procedures and methods, and their ability to predict SOM content from Vis-NIR and mid-IR data is discussed. We then review the most recent research using spectroscopy in different calibration scales (local, regional, or global). Finally, accuracy and robustness, as well as uncertainty in Vis-NIR and mid-IR spectroscopy, are considered. We conclude that spectroscopy, especially the mid-IR technique in association with Savitzky–Golay smoothing and derivatization and the least squares support vector machine (LS-SVM) algorithm, can be useful in determining SOM quantity and quality. Future research conducted for the standardization of protocols and soil conditions will allow more accurate and reliable results on a global and international scale.
Gholizadeh A., Borůvka L., Saberioon M.M., Kozák J., Vašát R., Němeček K. (2015): Comparing different data preprocessing methods for monitoring soil heavy metals based on soil spectral features. Soil & Water Res., 10: 218-227.The lands near mining industries in the Czech Republic are subjected to soil pollution with heavy metals. Excessive heavy metal concentrations in soils not only dramatically impact the soil quality, but also due to their persistent nature and indefinite biological half-lives, potentially toxic metals can accumulate in the food chain and can eventually endanger human health. Monitoring and spatial information of these elements require a large number of samples and cumbersome and time-consuming laboratory measurements. A faster method has been developed based on a multivariate calibration procedure using support vector machine regression (SVMR) with cross-validation, to establish a relationship between reflectance spectra in the visible-near infrared (Vis-NIR) region and concentration of Mn, Cu, Cd, Zn, and Pb in soil. Spectral preprocessing methods, first and second derivatives (FD and SD), standard normal variate (SNV), multiplicative scatter correction (MSC), and continuum removal (CR) were employed after smoothing with Savitzky-Golay to improve the robustness and performance of the calibration models. According to the criteria of maximal coefficient of determination (R 2 cv ) and minimal root mean square error of prediction in cross-validation (RMSEP cv ), the SVMR algorithm with FD preprocessing was determined as the best method for predicting Cu, Mn, Pb, and Zn concentration, whereas the SVMR model with CR preprocessing was chosen as the final method for predicting Cd. Overall, this study indicated that the Vis-NIR reflectance spectroscopy technique combined with a continuously enriched soil spectral library as well as a suitable preprocessing method could be a nondestructive alternative for monitoring of the soil environment. The future possibilities of multivariate calibration and preprocessing with real-time remote sensing data have to be explored.
In order to monitor Potentially Toxic Elements (PTEs) in anthropogenic soils on brown coal mining dumpsites, a large number of samples and cumbersome, time-consuming laboratory measurements are required. Due to its rapidity, convenience and accuracy, reflectance spectroscopy within the Visible-Near Infrared (Vis-NIR) region has been used to predict soil constituents. This study evaluated the suitability of Vis-NIR (350–2500 nm) reflectance spectroscopy for predicting PTEs concentration, using samples collected on large brown coal mining dumpsites in the Czech Republic. Partial Least Square Regression (PLSR) and Support Vector Machine Regression (SVMR) with cross-validation were used to relate PTEs data to the reflectance spectral data by applying different preprocessing strategies. According to the criteria of minimal Root Mean Square Error of Prediction of Cross Validation (RMSEPcv) and maximal coefficient of determination (R2
cv) and Residual Prediction Deviation (RPD), the SVMR models with the first derivative pretreatment provided the most accurate prediction for As (R2
cv) = 0.89, RMSEPcv = 1.89, RPD = 2.63). Less accurate, but acceptable prediction for screening purposes for Cd and Cu (0.66 ˂ R2
cv) ˂ 0.81, RMSEPcv = 0.0.8 and 4.08 respectively, 2.0 ˂ RPD ˂ 2.5) were obtained. The PLSR model for predicting Mn (R2
cv) = 0.44, RMSEPcv = 116.43, RPD = 1.45) presented an inadequate model. Overall, SVMR models for the Vis-NIR spectra could be used indirectly for an accurate assessment of PTEs’ concentrations.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.