Background:
Al5083 has been basically used in marine and aerospace applications where
it is intended for higher corrosion resistance and better weldability. Again this, Al5083 matrix has
not been suitable for various other applications such as electrical contact brushes, cylinder liners,
artificial joints and helicopter blades due to its poor wear resistance properties.
Objective:
The aim of this research is the optimization of wear rate of the composite with Al5083
matrix, reinforced with B4C (Boron carbide) particles, and it is achieved through the investigation of
the subsequent effect: wt.% of the reinforcement, applied load and sliding speed.
Methods:
The material used for specimen is Al5083 and Al5083/B4C composite which is melted at
750°C in an induction furnace; the composite is prepared by stir casting technique. It was developed
by an ex-situ technique. The liquid melt poured into preheated cast iron mould for carrying out the
specimen preparation of wear testing.
Results:
The wear rate of Al5083/B4C composite is less than Al5083, the most influencing factor on
wear rate is applied load and mechanism of deformation induced in the sliding surface of the pin was
analysed by SEM (scanning electron microscope).
Conclusion:
Wear rate of Al5083 and Al5083/B4C composite increases with the increase of applied
load, sliding speed and decreases as the wt. % B4C increases. The contribution of applied load is
more in wear rate as compared to the other two factors and the value predicted by Taguchi, obtained
by RSM (Response surface methodology) and evaluated by experiment are almost similar.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.