The paper reports a series of experiments with various HVOF spray systems (Jet Kote, Top Gun, Diamond Jet (DJ) Standard, DJ 2600 and 2700, JP-5000) using different types of WC-Co and WC-Co-Cr powders. The microstructure and phase composition of powders and coatings were analyzed by optical and scanning electron microscopy and X-ray diffraction. Carbon and oxygen content of the coatings were determined in order to study the decarburization and oxidation of the material during the spray process. Coatings were also characterized by their hardness, bond strength, abrasive wear and corrosion resistance. The results demonstrate that the powders exhibit various degrees of phase transformation during the spray process depending on the type of powder, the spray system and the spray parameters. Within a relatively wide range, the extend of phase transformations has only little effect on coating properties. Therefore coatings of high hardness and wear resistance can be produced with all HVOF spray systems when the proper spray powder and process parameters are chosen.
High velocity oxy-fuel (HVOF) spray experiments were carried out using various spray systems. A comparison is made of the systems introduced as a first and second generation (Jet Kote, Diamond Jet, Top Gun, CDS) with the more recently introduced systems of the third generation (JP 5000, DJ 2600, DJ 2700). The comparison is based on particle velocities and experiments to evaluate the heat transfer to the particles. The results show that the systems of the new generation with a converging-diverging nozzle section can produce up to 50% higher particle velocities. The higher kinetic energy allows to reduce the thermal energy and to reduce thermally activated phase transformations of the coating material during the spray process. Carbide coatings produced with one of the new HVOF systems exhibit a higher density, higher bond strength and higher hardness as compared to coatings produced with one of the systems of the first and second HVOF generation. Furthermore, the reduced thermal energy yields less oxidative loss of carbon and opens the possibility to spray coatings with neutral or compressive internal stresses, a prerequisite to produce carbide coatings up to a thickness of several millimeters.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.