The environmental performance of biodegradable materials has attracted attention from the academic and the industrial research over the recent years. Currently, degradation behavior and possible recyclability features, as well as actual recycling paths of such systems, are crucial to give them both durability and eco-sustainability. This paper presents a review of the degradation behaviour of biodegradable polymers and related composites, with particular concern for multi-layer films. The processing of biodegradable polymeric films and the manufacturing and properties of multilayer films based on biodegradable polymers will be discussed. The results and data collected show that: poly-lactic acid (PLA), poly-butylene adipate-co-terephthalate (PBAT) and poly-caprolactone (PCL) are the most used biodegradable polymers, but are prone to hydrolytic degradation during processing; environmental degradation is favored by enzymes, and can take place within weeks, while in water it can take from months to years; thermal degradation during recycling basically follows a hydrolytic path, due to moisture and high temperatures (β-scissions and transesterification) which may compromise processing and recycling; ultraviolet (UV) and thermal stabilization can be adequately performed using suitable stabilizers.
Polyethylene-co-vinylacetate (EVA) films with different concentrations (3.5 wt% and 7 wt%) of essential oil constituents, carvacrol or cinnamaldehyde, were prepared and characterized by mechanical, antibacterial and antibiofilm properties. The incorporation of the compounds into copolymer films affected their elastic modulus, tensile stress and elongation at break. Carvacrol and cinnamaldehyde act as plasticizers which reduce the intermolecular forces of polymer chains, thus improving the flexibility and extensibility of the film. The analysis of the surface characteristics demonstrated that essential oil constituents lowered the contact angle values without causing any remarkable variation of the surface roughness. The films allowed progressive diffusion of the bioactive molecules and the kinetic of release was correlated with the damaging effect on bacterial growth. The kill curves proved that the film with essential oil constituents (7 wt%) had a significant bactericidal effect (reduction of 4 and 2 log CFU) against Staphylococcus aureus and Escherichia coli and a bacteriostatic effect against Staphylococcus epidermidis and Listeria monocytogenes (reduction of about 1 log CFU). With regard to biofilm formation the biomass formed on polymeric films surface was significantly reduced if compared with the pure copolymer control. The results were confirmed by fluorescence microscopy images by Live/dead staining. The reduction in the surface tension coupled to an inherent bactericidal property of carvacrol and cinnamaldehyde could in turn affect the initial attachment phase of bacteria and compromise the normal biofilm development.
In this work we report the properties of nanocomposite based on PET with two different samples of organically modified montmorillonites. In particular, we studied the effect of the filler concentration on morphology, rheology, and mechanical performance, focusing our attention on the effect of the degradation phenomena of the clay modifiers. The results indicate that at low clay level the morphology achieved is mainly intercalated. On increasing the filler level, coalescence and/or bad defragmentation phenomena induce a coarser morphology, as confirmed by XRD, SEM, and TEM observations. When a more polar organic modifier is used to modify the clay, the particle adhesion and distribution is slightly better.Conversely, at the processing temperatures adopted, this organic modifier induces a strong degradation of PET, as confirmed by melt rheology and intrinsic viscosity measurements. DSC indicates, in addition, a slight increase of crystallinity likely due to the decreased molecular weight. As regards the mechanical properties, Young's modulus is not significantly changed unless high amounts of clay (10%) are used while the elongation at break drops even at the lowest clay content.
Zinc oxide (ZnO) nanoparticles functionalized with a bi-functional coupling agent
methacryloxypropyl-trimethoxysilane (MPS) were used to fabricate a vinyl-ester resin polymeric
nanocomposite, which shows an improved interfacial interaction between the particle and matrix.
As a result, in comparison to the unmodified particle-filled nanocomposites, the functionalized
particle-filled composites possessed higher resistance to thermal degradation, and demonstrated
improved UV shielding and enhanced photoluminescent properties. The more uniform particle
dispersion, passivation of the particle surface with MPS and increased oxygen vacancies were
justified to contribute to the increased thermal stability and the enhanced photoluminescent
properties. Significant tensile strength improvement was closely related to the observed uniform
particle distribution and the intimate interfacial interaction through the strong chemical bonding
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.