No abstract

No abstract

a b s t r a c tThe paper concerns the development of the PTO (power take-off) control of an OWC (oscillating-watercolumn) spar-buoy wave energy converter. The OWC spar-buoy is an axisymmetric device consisting of a submerged vertical tail tube open at both ends, rigidly fixed to a floater that moves essentially in heave. The oscillating motion of the internal free surface relative to the floater-tube set, produced by the incident waves, makes the air flow through a novel self-rectifying air turbine: the biradial turbine. To reduce the losses of the PTO system at partial load, an electrical generator with a rated power twice the maximum expected average power conversion of the buoy was adopted. The control of the turbinegenerator set under highly energetic sea-state conditions was experimentally investigated by means of tests performed in a PTO test rig. In the reported tests, the hydrodynamics of the OWC spar-buoy and the aerodynamics of the air turbine were numerically simulated in real-time and coupled with the experimental model of the turbine/electrical generator set in a hardware-in-the-loop configuration. The experimental results allowed the dynamic behaviour of the PTO to be characterized and provided validation of the proposed control algorithms that ensure operation within safe limits.

No abstract

No abstract

Although it is widely accepted that accurate modeling of wave energy converters is essential for effective and reliable design, it is often challenging to define an accurate model which is also fast enough to investigate the design space or to perform extensive sensitivity analysis. In fact, the required accuracy is usually brought by the inclusion of nonlinearities, which are often time-consuming to compute. This paper provides a computationally efficient meshless nonlinear Froude–Krylov model, including nonlinear kinematics and an integral formulation of drag forces in six degrees of freedom, which computes almost in real-time. Moreover, a mooring system model with three lines is included, with each line comprising of an anchor, a jumper, and a clump weight. The mathematical model is used to investigate the highly-nonlinear phenomenon of parametric resonance, which has particularly detrimental effects on the energy conversion performance of the spar-buoy oscillating water column (OWC) device. Furthermore, the sensitivity on changes to jumper and clump-weight masses are discussed. It is found that mean drift and peak loads increase with decreasing line pre-tension, eventually leading to a reduction of the operational region. On the other hand, the line pre-tension does not affect power production efficiency, nor is it able to avoid or significantly limit the severity of parametric instability.

No abstract

Representative models of the nonlinear behavior of floating platforms are essential for their successful design, especially in the emerging field of wave energy conversion where nonlinear dynamics can have substantially detrimental effects on the converter efficiency. The spar buoy, commonly used for deepwater drilling, oil and natural gas extraction and storage, as well as offshore wind and wave energy generation, is known to be prone to experience parametric resonance. In the vast majority of cases, parametric resonance is studied by means of simplified analytical models, considering only two degrees of freedom (DoFs) of archetypical geometries, while neglecting collateral complexity of ancillary systems. On the contrary, this paper implements a representative 7-DoF nonlinear hydrodynamic model of the full complexity of a realistic spar buoy wave energy converter, which is used to verify the likelihood of parametric instability, quantify the severity of the parametrically excited