El proceso sol-gel es un método de gran interés para la producción de películas vítreas sobre metales, que actúan como barrera protectora frente a la oxidación y aumentan su resistencia a la corrosión. Se han obtenido recubrimientos inorgánicos e híbridos de distintas composiciones sobre distintos metales usando técnicas como inmersión, centrifugado y pulverización. Aunque estos métodos proporcionan recubrimientos con buenas propiedades los espesores obtenidos son bajos (inferiores a 2 mm), lo que limita sus posibilidades de aplicación. La deposición electroforética (EPD) se perfila como una técnica de gran versatilidad para la obtención de recubrimientos homogéneos de mayor espesor. El objetivo de este trabajo es la preparación de recubrimientos sobre metal por EPD a partir de soluciones híbridas de SiO 2 (TEOS, MTES) y de suspensiones coloidales de SiO 2 en las que las propias soluciones híbridas actúan como medio de dispersión. Tanto las soluciones como las suspensiones se han estudiado mediante medidas de viscosidad, densidad y conductividad. Asimismo, se han estudiado los pará-metros físicos asociados a la EPD, tales como el tiempo de deposición y la densidad de corriente, teniendo en cuenta el efecto adicional de formación de capa por inmersión durante la extracción. Los recubrimientos se han caracterizado mediante perfilometría y microscopía óptica, comparando las capas depositadas por inmersión y las obtenidas por EPD. Palabras Clave: Sol-gel, recubrimientos, inmersión, deposición electroforética, sílice coloidal. Sol-gel coatings obtained from electrophoretic depositions (EPD) on metalsSol-gel process is a suitable method for the production of glass-like coatings onto metals, acting as barrier against oxidation and providing an increased resistance to corrosion. Hybrid and inorganic coatings of different compositions have been used for coating several metals by using techniques like dipping, spin-coating and spraying. Although these methods lead to good properties the final coatings are restricted by the thin thickness (up to 2 µm), thus limiting the application range. Electrophoretic deposition (EPD) is considered a highly versatile technique for producing homogeneous thicker coatings. The aim of this work deals with the preparation of coatings onto metals by EPD from hybrid silica sols (TEOS, MTES) and from colloidal silica suspensions where the hybrid sols constitute the suspending medium. Both the solutions and the suspensions have been studied in terms of viscosity, density and conductivity. Furthermore, the physical parameters associated to EPD, such as deposition time and current density, have been also studied, taking into account the additional contribution to the layer formed by EPD occurring by dipping during withdrawal. The coatings obtained by dipping and by EPD have been characterised by perfilometry and optical microscopy.Key words: Sol-gel, coatings, dipping, electrophoretic deposition, colloidal silica. INTRODUCCIÓNLa exposición de metales a condiciones de pH agresivas, a la presencia ...
El desarrollo de las tecnologías de fabricación de recubrimientos presenta importantes limitaciones relativas a los espesores de las capas fabricadas y a la geometría de los substratos a recubrir. En este trabajo se proponen dos procesos de conformado coloidal de revestimientos cerámicos y metálicos en la cara interna de un tubo de acero. El revestimiento cerámico (CaCO 3 ) se ha conformado por deposición electroforética (EPD). Para ello se han preparado suspensiones estables de CaCO 3 en agua, y se ha diseñado una célula electroforética en la que el tubo es a la vez el contenedor y el electrodo de trabajo. El revestimiento metálico (níquel) se ha fabricado por vertido de una suspensión estable sobre el propio tubo de acero. Para ello se han acondicionado las suspensiones con el objetivo de mejorar el mojado y la adherencia sobre el acero. A partir de los procesos de EPD y vertido se han obtenido revestimientos cerámicos y metálicos, respectivamente, con espesores de 300-350 µm, homogéneos y fuertemente adheridos a la cara interna del tubo de acero. Palabras clave: Procesamiento coloidal, deposición electroforética, recubrimientos, Carbonato cálcico, Níquel Colloidal forming of coatings in the inner walls of a steel pipeThe development of new coating processes has important limitations related to the films thickness and the geometry of the coating substrates. In this work, two colloidal forming processes are proposed for manufacturing ceramic and metallic coatings on the inner surface of a steel pipe. Ceramic coatings of CaCO 3 have been formed by electrophoretic deposition (EPD). Aqueous stable suspensions were prepared and a electrophoretic cell was designed, in which the steel tube to be coated acted simultaneously as container and working electrode. Nickel films were prepared by filling the pipe with the suspension and rotating to fully wet the steel surface. Nickel suspensions were formulated focusing an improved wettability and adherence to the steel surface by using binders. From these processes, ceramic and metallic coatings with 300-350 µm in thickness, homogeneous and strongly adhered to the inner surface of the steel pipe have been obtained. Key words: Colloidal processing, electrophoretic deposition, coatings, calcium carbonate, nickel INTRODUCCIÓNLa modificación superficial de aceros es necesaria en numerosas aplicaciones en ingeniería, entre las que se puede mencionar el transporte a través de sólidos porosos (1-3), tales como flujo de gases, mojado, intercambiadores de calor, etc., o la protección contra la degradación superficial de los mismos (4,5), bien sea por corrosión, desgaste, rayado, etc. Una de las opciones más versátiles para modificar las características del acero es mediante el conformado de recubrimientos, tanto cerámicos como metálicos.Las mayores restricciones de las técnicas actuales de fabricación de recubrimientos son las derivadas de la geometría del sistema y del espesor final a conseguir (6). Sin embargo, el procesamiento coloidal de suspensiones ofrece distintas alternativas...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.