The shot to shot variation in perveance of a planar diode with explosive emission graphite cathode in a range of accelerating gaps 3–12 mm is investigated experimentally. The typical electron beam parameters were 200 kV, 12 kA, 100 ns, with a few hundreds of A/cm2 current density. The diode perveance remains less than the Child–Langmuir value, indicating that only a fraction of the cathode take part in the emission process. A simple statistical analysis of the diode perveance shows that the shot to shot variation is more pronounced for the later part of the accelerating pulse. The cathode plasma expansion velocity and the effective initial emission area have been calculated from the perveance data. It was found that the plasma expansion velocity varies from 3 to 6.5 cm/μs. The mean expansion velocity and the standard deviation increase with the increase in the accelerating gap. The initial emission areas also varies randomly on a shot to shot basis and at the beginning of the accelerating pulse only 4%–35% of the cathode area take part in the emission process. The mean initial emission area and the standard deviation also increase with the increase in the accelerating gap. Experimental result indicates that the larger gaps and lower electric fields suggest a path to more uniform emission.
High power electron beam generation studies were carried out in a planar diode configuration to investigate the effect of the accelerating gap, diode voltage, and anode-cathode materials on the electrode plasma expansion. The diode voltage has been varied from 145–428 kV, whereas the current density has been varied from 208–2215 A/cm2 with 100 ns pulse duration. It was found that the diode voltage and current follow the bipolar space-charge limited flow model. The anode and cathode plasma expansion velocities were calculated using the perveance data. The plasma expands at 11 cm/μs for 34 mm anode-cathode gap and the plasma velocity decreases for smaller gaps. It was found that the plasma expansion velocity increases significantly due to the cathode edge contribution and the edge contribution is particularly important during the beginning and the end of the accelerating pulse when the diode voltage and the corresponding electric field are comparatively low. It was also observed that the diode current increased by a factor of 3 when anode material was released into the accelerating gap due to the electron beam bombardment.
High power microwave (HPM) generation studies were carried out in KALI-5000 pulse power system. The intense relativistic electron beam was utilized to generate HPMs using a coaxial virtual cathode oscillator. The typical electron beam parameters were 350 kV, 25 kA, and 100 ns, with a few hundreds of ampere per centimeter square current density. Microwaves were generated with graphite and polymer velvet cathode at various diode voltage, current, and accelerating gaps. A horn antenna setup with diode detector and attenuators was used to measure the microwave power. It was observed that the microwave power increases with the diode voltage and current and reduces with the accelerating gap. It was found that both the peak power and width of the microwave pulse is larger for the velvet cathode compared to the graphite cathode. In a coaxial vircator, velvet cathode is superior to the graphite cathode due to its shorter turn on time and better electron beam uniformity.
Intense gigawatt relativistic electron beam has been generated in a high power cylindrical diode in the presence of prepulse. A bipolar prepulse voltage, recorded at the diode, varies both in amplitude and time duration with the Marx generator voltage. It was found that only at the accelerating gap ⩽1.65cm there is some shot to shot variation in the diode voltage and current for the same Marx generator voltage. The anode and cathode plasma expansion velocities were calculated using the perveance data. The plasma expands at 5cm∕μs for 1.85cm radial anode-cathode gap and the plasma velocity decreases for smaller gap. It was found that the effect of the prepulse is less pronounced in the cylindrical diode as compared to planar diode that allows one operation of the cylindrical diode with the gap ⩽1.85cm.
Intense electron beam generation studies were carried out using polymer velvet as a cathode material. The typical electron beam parameters were 250 kV, 15 kA, 100 ns, with a few hundred A cm−2 current density. The cathode plasma expansion velocity and the effective initial emission area have been calculated using the perveance data. It was found that the gap closure velocity and the initial emission areas vary randomly on a shot-to-shot basis. In comparison with a graphite cathode, the gap closure velocity of the velvet cathode is less for lower diode gaps, but is much higher for the larger accelerating gaps. One-way analysis of variance was employed to examine the statistical correlation between the diode voltage, current, plasma velocity and the effective emission area for various diode gaps and for two different cathode materials. It was shown that the mean diode voltage, current, plasma velocity and the effective emission area are different for graphite and velvet cathodes whereas the statistical variations of diode voltage and plasma expansion velocities are not cathode material dependent. However, the mean effective emission area is cathode material dependent as are the variances.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.