The aim of this article is to provide an introduction to picosecond laser ultrasonics, a means by which gigahertz-terahertz ultrasonic waves can be generated and detected by ultrashort light pulses. This method can be used to characterize materials with nanometer spatial resolution. With reference to key experiments, we first review the theoretical background for normal-incidence optical detection of longitudinal acoustic waves in opaque single-layer isotropic thin films. The theory is extended to handle isotropic multilayer samples, and is again compared to experiment. We then review applications to anisotropic samples, including oblique-incidence optical probing, and treat the generation and detection of shear waves. Solids including metals and semiconductors are mainly discussed, although liquids are briefly mentioned.

The photodeflection method when applied to measure the low thermal diffusivity of some materials gives inconsistent results. In this article a way to extend the thermal diffusivity range of measurements using the phase of the photodeflection signal is presented. A comparison with computer simulations and experimental results shows good agreement.

Extrinsic or pseudo-chiral (meta)surfaces have an achiral structure, yet they can give rise to circular dichroism when the experiment itself becomes chiral. Although these surfaces are known to yield differences in reflected and transmitted circularly polarized light, the exact mechanism of the interaction has never been directly demonstrated. Here we present a comprehensive linear and nonlinear optical investigation of a metasurface composed of tilted gold nanowires. In the linear regime, we directly demonstrate the selective absorption of circularly polarised light depending on the orientation of the metasurface. In the nonlinear regime, we demonstrate for the first time how second harmonic generation circular dichroism in such extrinsic/pseudo-chiral materials can be understood in terms of effective nonlinear susceptibility tensor elements that switch sign depending on the orientation of the metasurface. By providing fundamental understanding of the chiroptical interactions in achiral metasurfaces, our work opens up new perspectives for the optimisation of their properties.

Nowadays nanophotonics aims towards low-cost, chip-scale devices that can tailor electromagnetic properties, one of which is the control of the circular polarization at the nanoscale, important for novel optical devices. Here we show that nanosphere lithography, combined with tilted metal deposition, can provide novel metasurfaces with chiral properties.We apply the photo-acoustic technique to characterize the circular dichroism at 633 nm of polystyrene nanospheres covered by three different metals: Au-and Cr-covered samples show extrinsic chiral behavior, while the Ag-covered sample shows circular dichroism at normal incidence, characteristic for intrinsic chirality. As the experimental data are in good agreement with numerical predictions, we believe that such design can be optimized to get efficient circularly polarized detection at the nanoscale. THE MANUSCRIPTChirality, a lack of the mirror symmetry of an object 1 , is an important property of some of the building blocks of our world: many molecules, amino-acids, DNA, sugars, drugs are chiral. Two mirror images of the same object differently interact with circularly polarized light of the opposite handedness, while having other measurable properties equal. In particular, chirality can affect the absorption and/or phase velocity of circularly polarized light, therefore it is possible to measure a difference in absorption directly related to the molecules' chirality. This measurement is known as Circular Dichroism (CD). At the nanoscale, when the nanostructures are comparable or smaller than the light wavelength, and organized periodically, they form a metasurface; generally, if the symmetry of the metasurface is broken, a chiral behavior is expected 2 . Chiral metasurfaces can manipulate electromagnetic fields and enhance the interaction with chiral molecules, important for chiral sensing 3 . On the other hand, they can control the polarization state of the optical field, or emit circularly polarized light, thus leading to applications in optical and quantum communications 4 . Geometric features of intrinsically chiral metasurfaces (the nanostructure in the unit cell is usually helix or gammadion-like) can be complicated to fabricate and implement at the nanoscale. This problem can be solved by a proper experimental set-up following the rule that the impinging light wavevector, the average surface normal, and the sample direction must be nonplanar. Such chiral behavior is called extrinsic chirality as it is governed by both experimental set-up and the a) Electronic mail:

III–V semiconductors nanowires (NW) have recently attracted a significant interest for their potential application in the development of high efficiency, highly-integrated photonic devices and in particular for the possibility to integrate direct bandgap materials with silicon-based devices. Here we report the absorbance properties of GaAs-AlGaAs-GaAs core-shell-supershell NWs using photo-acoustic spectroscopy (PAS) measurements in the spectral range from 300 nm to 1100 nm wavelengths. The NWs were fabricated by self-catalyzed growth on Si substrates and their dimensions (length ~5 μm, diameter ~140–150 nm) allow for the coupling of the incident light to the guided modes in near-infrared (IR) part of the spectrum. This coupling results in resonant absorption peaks in the visible and near IR clearly evidenced by PAS. The analysis reveal broadening of the resonant absorption peaks arising from the NW size distribution and the interaction with other NWs. The results show that the PAS technique, directly providing scattering independent absorption spectra, is a very useful tool for the characterization and investigation of vertical NWs as well as for the design of NW ensembles for photonic applications, such as Si-integrated light sources, solar cells, and wavelength dependent photodetectors.

In this paper, we design and simulate VO2/metal multilayers to obtain a large tunability of the thermal emissivity of infrared (IR) filters in the typical mid wave IR window of many infrared cameras. The multilayer structure is optimized to realise a low emissivity filter at high temperatures useful for military purposes. The values of tunability found for VO2/metal multilayers are larger than the value for a single thick layer of VO2. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4739489

Ultrashort optical pulses are used to excite and probe picosecond acoustic pulses in a sample consisting of an opaque material upon which ice is continuously deposited from the vapor phase at ϳ110 K. By analysis of the ultrasonic propagation and reflection inside the submicron ice film and taking into account the scattering of the probe light by the acoustic waves, the thickness, sound velocity, refractive index, ultrasonic attenuation, and photoelastic constant of the ice film are derived. This method should find applications for the in situ monitoring of thin transparent films during growth.

We present a detailed infrared study of the semiconductor-to-metal transition (SMT) in a vanadium dioxide (VO2) film deposited on silicon wafer. The VO2 phase transition is studied in the mid-infrared region by analyzing the transmittance and the reflectance measurements, and the calculated emissivity. The reflectance has been measured in two configurations: from the side of the VO2 film and from that of Si wafer. The results show a strong asymmetry between the emissivity in the two configurations, and the fact that the emissivity dynamic range from the silicon side is twice as large than that from the VO2 side. The temperature behaviour of the emissivity during the SMT put into evidence the phenomenon of the anomalous absorption in VO2, which has been explained by applying the Maxwell Garnett effective medium approximation theory.