No abstract

Abstract. Semi-IPNs with varying contents of poly(vinyl alcohol) (PVA), poly acrylamide (PAM) and crosslinker N,N'-methylene bis acrylamide (MBA) were prepared by redox polymerization method. The structural and morphological properties were studied by Fourier transform infrared (FTIR) spectroscopy, environmental scanning electron microscopy (ESEM) and X-ray diffraction (XRD) methods, respectively. It was found that the surface of the hydrogel is heterogeneous with separated domains. XRD result shows the semi-crystalline nature of the semi-IPNs. The prepared semi-IPNs of different compositions were subjected to gamma irradiation (2 to 250 kGy) and the radiation induced effects on their strength of the semi-IPNs were studied by measuring the surface microhardness using a Vickers microhardness tester. Significant changes were observed in the Vickers microhardness, which were correlated with molecular architecture of the prepared semi-IPNs.

Semi-interpenetrating polymer networks (semi-IPNs) based on polyvinyl alcohol (PVA) and crosslinked polyacrylamide (PAM) were prepared by redox polymerization and further characterized by FTIR, ESEM, and XRD techniques. The semi-IPNs of varying compositions were investigated for their water sorption behavior, and the network parameters like average molecular weight between crosslinks (M C ) and crosslink density were evaluated from water imbibition measurements. The semi-IPNs were also judged for their in vitro blood compatibility by blood clot formation and percent hemolysis test. It was noticed that the chemical architecture exert a profound effect on the over all performance of the biomaterials.

Semi-IPNs based on polyvinyl alcohol (PVA) and crosslinked polyacrylamide (PAM) were prepared and characterized. Various compositions of semi-interpenetrating polymer networks (semi-IPNs) were prepared by varying concentrations of PVA, acrylamide (AM) and crosslinker N,N'-methylene bis acrylamide (MBA) in the feed mixtures and polymerized using a suitable redox system comprising of potassium persulphate and metabisulphite. The prepared semi-IPNs were characterized by fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD) methods. The prepared semi-IPNs were also investigated for microhardness measurements.

No abstract