No abstract

InGaN/GaN triangular shaped multiple quantum wells (QWs) grown by grading In composition with time were adopted as an active layer of blue light-emitting diodes (LEDs). Compared to the LEDs with conventional rectangular QW structures, the triangular QW LEDs showed a higher intensity and a narrower linewidth of electrical luminescence (EL), a lower operation voltage, and a stronger light-output power. EL spectra of the triangular-QW-based LEDs also showed that the peak energy is nearly independent of the injection current and temperature, indicating that the triangular QW LED is more efficient and stable than the rectangular one.

Structural and optical properties of various shapes of quantum wells (QWs), including rectangular, triangular, trapezoidal, and polygonal ones are investigated. Photoluminescence (PL) measurements show that the highest light emission efficiency and the best reproducibility in the intensity and wavelength are obtained from trapezoidal QWs. The temperature dependence of PL spectra indicates the more localized nature of excitons in the trapezoidal QWs. A plan-view transmission electron microscopy shows that quantum dots (QDs) are formed inside the dislocation loop in trapezoidal QWs. The distribution of QDs in size and composition becomes more uniform with trapezoidal QWs than with rectangular QWs, leading to superior light-emission characteristics. It is suggested that QD engineering and dislocation control are possible, to some extent, by the modulation of the QW shape in InGaN/GaN-based light-emitting devices.

No abstract

Multi-layer barrier structure is suggested as an alternative approach to single-layer polarization matching barrier structure for the reduction of efficiency droop. Time resolved photoluminescence measurement showed that polarization field was reduced by 19% in the multilayer barrier light emitting diodes structures. Optical power measurements on packaged devices showed overall increase of external quantum efficiency for all currents up to the current density of 150 A / cm 2 . Increase of optical power is attributed to reduced polarization and decreased current overflow to p-side cladding layers. These results provide additional evidences that polarization is important in addressing the droop problem.