No abstract

Osseointegration of load-bearing orthopaedic implants, including interbody fusion devices, is critical to long-term biomechanical functionality. Mechanical loads are a key regulator of bone tissue remodeling and maintenance, and stress-shielding due to metal orthopaedic implants being much stiffer than bone has been implicated in clinical observations of long-term bone loss in tissue adjacent to implants. Porous features that accommodate bone ingrowth have improved implant fixation in the short term, but long-term retrieval studies have sometimes demonstrated limited, superficial ingrowth into the pore layer of metal implants and aseptic loosening remains a problem for a subset of patients. Polyether-ether-ketone (PEEK) is a widely used orthopaedic material with an elastic modulus more similar to bone than metals, and a manufacturing process to form porous PEEK was recently developed to allow bone ingrowth while preserving strength for load-bearing applications. To investigate the biomechanical implications of porous PEEK compared to porous metals, we analyzed finite element (FE) models of the pore structure-bone interface using two clinically available implants with high (> 60%) porosity, one being constructed from PEEK and the other from electron beam 3D-printed titanium (Ti). The objective of this study was to investigate how porous PEEK and porous Ti mechanical properties affect load sharing with bone within the porous architectures over time. Porous PEEK substantially increased the load share transferred to ingrown bone compared to porous Ti under compression (i.e. at 4 weeks: PEEK = 66%; Ti = 13%), tension (PEEK = 71%; Ti = 12%), and shear (PEEK = 68%; Ti = 9%) at all time points of simulated bone ingrowth. Applying PEEK mechanical properties to the Ti implant geometry and vice versa demonstrated that the observed increases in load sharing with PEEK were primarily due to differences in intrinsic elastic modulus and not pore architecture (i.e. 4 weeks, compression: PEEK material/Ti geometry = 53%; Ti material/PEEK geometry = 12%). Additionally, local tissue energy effective strains on bone tissue adjacent to the implant under spinal load magnitudes were over two-fold higher with porous PEEK than porous Ti (i.e. 4 weeks, compression: PEEK = 784 ± 351 microstrain; Ti = 180 ± 300 microstrain; and 12 weeks, compression: PEEK = 298 ± 88 microstrain; Ti = 121 ± 49 microstrain). The higher local strains on bone tissue in the PEEK pore structure were below previously established thresholds for bone damage but in the range necessary for physiological bone maintenance and adaptation. Placing these strain magnitudes in the context of literature on bone adaptation to mechanical loads, this study suggests that porous PEEK structures may provide a more favorable mechanical environment for bone formation and maintenance under spinal load magnitudes than currently available porous 3D-printed Ti, regardless of the level of bone ingrowth.

The influence of fall orientation on femur strength has important implications for understanding hip fracture risk. A new image analysis technique showed that the strength of the femoral neck in 37 males varied significantly along the neck axis and that bending strength varied by a factor of up to 2.8 for different loading directions.Introduction: Osteoporosis is associated with decreased BMD and increased hip fracture risk, but it is unclear whether specific osteoporotic changes in the proximal femur lead to a more vulnerable overall structure. Nonhomogeneous beam theory, which is used to determine the mechanical response of composite structures to applied loads, can be used along with QCT to estimate the resistance of the femoral neck to axial forces and bending moments. Materials and Methods:The bending moment [M y ()] sufficient to induce yielding within femoral neck sections was estimated for a range of bending orientations () using in vivo QCT images of 37 male (mean age, 73 years; range, 65-87 years) femora. Volumetric BMD, axial stiffness, average moment at yield (M y,avg ), maximum and minimum moment at yield (M y,max and M y,min ), bone strength index (BSI), stress-strain index (SSI), and density-weighted moments of resistance (R x and R y ) were also computed. Differences among the proximal, mid-, and distal neck regions were detected using ANOVA. Results: M y () was found to vary by as much as a factor of 2.8 for different bending directions. Axial stiffness, M y,avg , M y,max , M y,min , BSI, and R x differed significantly between all femoral neck regions, with an overall trend of increasing axial stiffness and bending strength when moving from the proximal neck to the distal neck. Mean axial stiffness increased 62% between the proximal and distal neck, and mean M y,avg increased 53% between the proximal and distal neck. Conclusions:The results of this study show that femoral neck strength strongly depends on both fall orientation and location along the neck axis. Compressive yielding in the superior portion of the femoral neck is expected to initiate fracture in a fall to the side.

Osteocytes can participate in systemic mineral homeostasis through perilacunar maintenance and remodeling, where changes to osteocyte lacunar morphology may affect bone structural integrity, tissue strains, and osteocyte mechanosensitivity. Though aging is associated with both decreased bone quality and altered mineral metabolism, it is not known if osteocyte lacunae undergo age-related changes in geometry. In order to survey lacunar changes with age, we developed an open-source program whereby 3D osteocyte lacunae are automatically segmented and then subsequently reconstructed from confocal laser scanning microscopy (CLSM) depth stacks for quantitative analysis of geometry and orientation. This approach takes advantage of the availability and speed of CLSM while avoiding time-consuming and bias-prone manual segmentation. Unlike conventional approaches used to quantify osteocyte lacunar morphology, CLSM enables facile analysis in three-dimensions with clear identification of osteocyte lacunae. We report that 3D osteocyte lacunae measured by CLSM become smaller, more spherical, more oblate, more spatially disorganized, and more sparsely populated with increased age in C57Bl/6 mouse cortical bone in groups spanning 6-24 months old. Critically, these age-related changes are in large part not observed in 2D analyses from the same samples. These results (1) demonstrate proof-of-concept of an efficient method to quantitatively assess osteocyte lacunae in 3D for application to a wide range of studies and (2) motivate further inquiry into how changes to osteocyte lacunar geometries and perilacunar material contribute to diminished bone quality in aging.