Bismuth telluride (Bi2Te3) two-dimensional (2D) nanosheets prepared by van der Waals epitaxy were successfully detached, transferred, and suspended for nano-indentation measurements to be performed on freestanding circular nanosheets. The Young's modulus acquired by fitting linear elastic behaviors of 26 samples (thickness: 5-14 nm) is only 11.7-25.7 GPa, significantly smaller than the bulk in-plane Young's modulus (50-55 GPa). Compliant and robust Bi2Te3 2D nanosheets suggest the feasibility of the elastic strain engineering of topological surface states.

Heterojunctions of semiconductors and metals are the fundamental building blocks of modern electronics. Coherent heterostructures between dissimilar materials can be achieved by composition, doping, or heteroepitaxy of chemically different elements. Here, we report the formation of coherent single-layer 1H−1T MoS 2 heterostructures by mechanical exfoliation on Au(111), which are chemically homogeneous with matched lattices but show electronically distinct semiconducting (1H phase) and metallic (1T phase) character, with the formation of these heterojunctions attributed to a combination of lattice strain and charge transfer. The exfoliation approach employed is free of tape residues usually found in many exfoliation methods and yields single-layer MoS 2 with millimeter (mm) size on the Au surface. Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), scanning tunneling microscopy (STM), and scanning tunneling spectroscopy (STS) have collectively been employed to elucidate the structural and electronic properties of MoS 2 monolayers on Au substrates. Bubbles in the MoS 2 formed by the trapping of ambient adsorbates beneath the single layer during deposition, have also been observed and characterized. Our work here provides a basis to produce two-dimensional heterostructures which represent potential candidates for future electronic devices.

In mechanochemistry, the application of controlled forces is key to altering reaction rates and pathways to direct product yields and selectivity. However, a fundamental knowledge gap exists between what is occurring on the atomic scale in mechanically driven reactions and the resulting macroscale outcomes. Two-dimensional (2D) materials, such as graphene, proffer a model system to study the impact of mechanical forces, such as strain, on chemical reactivity, as force distributions may be applied across a well-organized atomic-scale structure comprising a single layer of C atoms. Here, using Raman micro-spectroscopy and first-principles calculations, we have investigated the reaction of graphene, under varying degrees of strain, with 4-nitrobenzenediazonium tetrafluoroborate (4-NBD). We find that only with increased out-of-plane distortion (shifting the C atoms of graphene from sp 2 toward sp 3 electronic states) would the reactivity be increased, with larger out-of-plane distortions yielding greater reactivity. Density functional theory (DFT) calculations reveal that increasing the curvature of graphene decreases the activation barrier of 4-NBD functionalization and enhances the thermodynamic favorability of the reaction. Furthermore, we find that curvature affects the orientation of the graphene 2p z orbitals, and we then relate the thermodynamic feasibility of 4-NBD functionalization with the orbital orientation. These studies point to how the precise application of forces can be used to direct the functionalization of graphene for C−C bond forming reactions, which has significant implications for controlling its corresponding electronic structure in a well-defined fashion.

The presence of chlorophenols in drinking water can be hazardous to human health. Understanding the mechanisms of adsorption under specific experimental conditions would be beneficial when developing methods to remove toxic substances from drinking water during water treatment in order to limit human exposure to these contaminants. In this study, we investigated the sorption of chlorophenols on multi-walled carbon nanotubes using a density functional theory (DFT) approach. This was applied to study selected interactions between six solvents, five types of nanotubes, and six chlorophenols. Experimental data were used to construct structure-adsorption relationship (SAR) models that describe the recovery process. Specific interactions between solvents and chlorophenols were taken into account in the calculations by using novel specific mixture descriptors.