No abstract

An efficient electron transport layer (ETL) plays a key role in promoting carrier separation and electron extraction in planar perovskite solar cells (PSCs). An effective composite ETL is fabricated using carboxylic‐acid‐ and hydroxyl‐rich red‐carbon quantum dots (RCQs) to dope low‐temperature solution‐processed SnO2, which dramatically increases its electron mobility by ≈20 times from 9.32 × 10−4 to 1.73 × 10−2 cm2 V−1 s−1. The mobility achieved is one of the highest reported electron mobilities for modified SnO2. Fabricated planar PSCs based on this novel SnO2 ETL demonstrate an outstanding improvement in efficiency from 19.15% for PSCs without RCQs up to 22.77% and have enhanced long‐term stability against humidity, preserving over 95% of the initial efficiency after 1000 h under 40–60% humidity at 25 °C. These significant achievements are solely attributed to the excellent electron mobility of the novel ETL, which is also proven to help the passivation of traps/defects at the ETL/perovskite interface and to promote the formation of highly crystallized perovskite, with an enhanced phase purity and uniformity over a large area. These results demonstrate that inexpensive RCQs are simple but excellent additives for producing efficient ETLs in stable high‐performance PSCs as well as other perovskite‐based optoelectronics.

No abstract

The dual-emissive N, S co-doped carbon dots (N, S-CDs) with a long emission wavelength were synthesized via solvothermal method. The N, S-CDs possess relatively high photoluminescence (PL) quantum yield (QY) (35.7%) towards near-infrared fluorescent peak up to 648 nm. With the advanced characterization techniques including X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), etc. It is found that the doped N, S elements play an important role in the formation of high QY CDs. The N, S-CDs exist distinct pH-sensitive feature with reversible fluorescence in a good linear relationship with pH values in the range of 1.0-13.0. What is more, N, S-CDs can be used as an ultrasensitive Ag + probe sensor with the resolution up to 0.4 μM. This finding will expand the application of as prepared N, S-CDs in sensing and environmental fields.

Quantum dots, derived from two-dimensional (2D) materials, have shown promise in bioimaging, sensing and photothermal applications, and in white light emitting devices (WLEDs).

Carbon nanomaterials are promising metal-free catalysts for energy conversion and storage, but the catalysts are usually developed via traditional trial-and-error methods. To rationally design and accelerate the search for the highly-efficient catalysts, it is necessary to establish design principles for the carbon-based catalysts. This review focuses on the theoretical analysis and material design of the metal-free carbon nanomaterials as efficient photo-/electro-catalysts to facilitate the critical chemical reactions in clean and sustainable energy technologies, including oxygen reduction reaction in fuel cells, oxygen evolution reaction in metal-air batteries, iodine reduction reaction in dye-sensitized solar cells, hydrogen evolution reaction in water splitting, and carbon dioxide reduction in artificial photosynthesis. Basic catalytic principles, computationally guided design approaches and intrinsic descriptors, catalytic material design strategies, and future directions are discussed for the rational design and synthesis of highly efficient carbon-based catalysts for clean energy technologies.

No abstract

No abstract