In this study, the concept of polymer electrodes integrated with a wireless electrocardiogram (ECG) system was described. Polymer electrodes for long-term ECG measurements were fabricated by loading high content of carbon nanotubes (CNTs) in polydimethylsiloxane. Silver nanoparticles (Ag NPs) were added to increase the flexibility of the polymer and the conductivity of the electrode. An ECG electrode patch was fabricated by integrating the electrodes with an adhesive polydimethylsiloxane (aPDMS) layer. Holes in the electrode filled with aPDMS can enable robust contact between the electrode and skin, reducing motion artifacts. A wireless ECG measurement system was developed and adapted to the polymer electrodes. The polymer electrodes combined with the measurement system were successfully applied in wireless, long-term recording of ECG signals. An eleven-day continuous test showed that the ECG signal did not degrade over time. The results of attach/detach tests demonstrated that the ECG signal was affected by motion artifacts after six attach/detach cycles. The electrodes produced are flexible and exhibit good ECG performance, and therefore can be used in wearable medical monitoring systems. The approach proposed in this study holds significant promise for commercial application in medical fields.
Applying existing methods to emotional support conversation-which provides valuable assistance to people who are in need-has two major limitations: (a) they generally employ a conversation-level emotion label, which is too coarse-grained to capture user's instant mental state; (b) most of them focus on expressing empathy in the response(s) rather than gradually reducing user's distress. To address the problems, we propose a novel model MISC, which firstly infers the user's fine-grained emotional status, and then responds skillfully using a mixture of strategy. Experimental results on the benchmark dataset demonstrate the effectiveness of our method and reveal the benefits of fine-grained emotion understanding as well as mixed-up strategy modeling. Our code and data could be found in https: //github.com/morecry/MISC.
Polymer-based flexible electrodes are receiving much attention in medical applications due to their good wearing comfort. The current fabrication methods of such electrodes are not widely applied. In this study, polydimethylsiloxane (PDMS) and conductive additives of carbon nanotubes (CNTs) were employed to fabricate composite electrodes for electrocardiography (ECG). A three-step dispersion process consisting of ultrasonication, stirring, and in situ polymerization was developed to yield homogenous CNTs-PDMS mixtures. The CNTs-PDMS mixtures were used to fabricate CNTs-PDMS composite electrodes by replica technology. The influence of ultrasonication time and CNT concentration on polymer electrode performance was evaluated by impedance and ECG measurements. The signal amplitude of the electrodes prepared using an ultrasonication time of 12 h and CNT content of 5 wt% was comparable to that of commercial Ag/AgCl electrodes. The polymer electrodes were easily fabricated by conventional manufacturing techniques, indicating a potential advantage of reduced cost for mass production.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.