No abstract

No abstract

The lithium (Li) metal anode suffers severe interfacial instability from its high reactivity toward liquid electrolytes, especially carbonate-based electrolytes, resulting in poor electrochemical performance of batteries that use 4 V high-capacity cathodes. We report a new skin-grafting strategy that stabilizes the Li metal-liquid electrolyte interface by coating the Li metal surface with poly((N-2,2-dimethyl-1,3-dioxolane-4-methyl)-5-norbornene-exo-2,3-dicarboximide), a chemically and electrochemically active polymer layer. This layer, composed of cyclic ether groups with a stiff polycyclic main chain, serves as a grafted polymer skin on the Li metal anode not only to incorporate ether-based polymeric components into the solid-electrolyte interphase (SEI) but also to accommodate Li deposition/dissolution under the skin in a dendrite/moss-free manner. Consequently, a Li-metal battery employing a Li metal anode with the grafted skin paired with LiNiCoMnO cathode has a 90.0% capacity retention after 400 charge/discharge cycles and a capacity of 1.2 mAh/cm in a carbonate-based electrolyte. This proof-of-concept study provides a new direction for regulating the interfacial chemistry of Li metal anodes and for enabling high-performance Li-metal batteries.

Lithium metal is a promising anode candidate for the next-generation rechargeable battery due to its highest specific capacity (3860 mA h g−1) and lowest potential, but low Coulombic efficiency and formation of lithium dendrites hinder its practical application. Here, we report a self-formed flexible hybrid solid-electrolyte interphase layer through co-deposition of organosulfides/organopolysulfides and inorganic lithium salts using sulfur-containing polymers as an additive in the electrolyte. The organosulfides/organopolysulfides serve as “plasticizer” in the solid-electrolyte interphase layer to improve its mechanical flexibility and toughness. The as-formed robust solid-electrolyte interphase layers enable dendrite-free lithium deposition and significantly improve Coulombic efficiency (99% over 400 cycles at a current density of 2 mA cm−2). A lithium-sulfur battery based on this strategy exhibits long cycling life (1000 cycles) and good capacity retention. This study reveals an avenue to effectively fabricate stable solid-electrolyte interphase layer for solving the issues associated with lithium metal anodes.

Nanosheets rolling‐up: The synthesis of MoO3–x‐based ultrathin nanosheets and their transformation into nanotubes, which is driven by the oxidation of MoV to MoVI, is reported. Tunable localized surface plasmon resonance can be achieved as the oxidation reaction proceeds gradually.

Lithium-sulfur (Li-S) batteries are promising candidates for high-energy storage devices due to high theoretical capacities of both the sulfur cathode and lithium (Li) metal anode. Considerable efforts have been devoted to improving sulfur cathodes. However, issues associated with Li anodes, such as low Coulombic efficiency (CE) and growth of Li dendrites, remain unsolved due to unstable solid-electrolyte interphase (SEI) and lead to poor capacity retention and a short cycling life of Li-S batteries. In this work, we demonstrate a facile and effective approach to fabricate a flexible and robust hybrid SEI layer through co-deposition of aromatic-based organosulfides and inorganic Li salts using poly(sulfur-random-1,3-diisopropenylbenzene) as an additive in an electrolyte. The aromatic-based organic components with planar backbone conformation and π-π interaction in the SEI layers can improve the toughness and flexibility to promote stable and high efficient Li deposition/dissolution. The as-formed durable SEI layer can inhibit dendritic Li growth, enhance Li deposition/dissolution CE (99.1% over 420 cycles), and in turn enable Li-S batteries with good cycling stability (1000 cycles) and slow capacity decay. This work demonstrates a route to address the issues associated with Li metal anodes and promote the development of high-energy rechargeable Li metal batteries.

Li-alloy-based anode materials are very promising for breaking current energy limits of lithium-ion battery technologies. Unfortunately, these materials still suffer from poor solid-electrolyte interphase (SEI) stability, resulting in unsatisfied electrochemical performances. The typical SEI formation method, electrochemical decomposition of electrolytes onto the active material surface, lacks a deliberate control of the SEI functions and structures. Here we propose a general method of manipulating the formation process, chemical composition, and morphology of the SEI for Li-alloy anodes, using Si and Ge nanoparticle anodes as the platform. The SEI was fabricated through a covalent anchoring of multiple functional components onto the active material surface, followed by electrochemical decomposition of the functional components and conventional electrolyte. Click reaction, serving as the covalent anchoring approach, allows an accurate control of the SEI composition and structure at the molecular level through tuning the chemical structure and amount of variety of functional components and provides an intimate contact between the SEI and the Li-alloy material surface contributed by the covalent bonding. The optimized Si nanoparticle SEI, functionalized by a unique combination of diverse components and containing a high concentration of organic components attributed to the preanchored functional components, presented a stable composition and durable morphology during cycling and led to an improved first cycle efficiency of Si nanoparticle anodes and its long cycle life in a full cell. This general method displays potential benefits to construct stable SEIs for other Li-alloy anodes.

A Na-ion solid-state electrolyte, Na P As S , is developed with an exceptionally high conductivity of 1.46 mS cm at 25 °C and enhanced moisture stability. Dual effects of alloying element As (lattice expansion and a weaker AsS bond strength) are responsible for the superior conductivity. Improved moisture stability is regulated by shifting low-energy moisture reactions to high-energy ones due to As.