A versatile two-step wet process to fabricate Pt, Pd, Rh, and Ru nanoparticle films (simplified as nanofilms hereafter) for in situ attenuated total reflection Fourier transform infrared (ATR-FTIR) study of electrochemical interfaces is presented, which incorporates an initial chemical deposition of a gold nanofilm on the basal plane of a silicon prism with the subsequent electrodepostion of desired platinum group metal overlayers. Galvanostatic electrodeposition of Pt, Rh, and Pd from phosphate or perchloric acid electrolytes, or potentiostatic electrodeposition of Ru from a sulfuric acid electrolyte, yields sufficiently "pinhole-free" overlayers as evidenced by electrochemical and spectroscopic characterizations. The Pt group metal nanofilms thus obtained exhibit strongly enhanced IR absorption. In contrast to the corresponding metal films electrochemically deposited directly on glassy carbon and bulk metal electrodes, the observed enhanced absorption for the probe molecule CO exhibits normal unipolar band shapes. Scanning tunneling microscopic (STM) images reveal that fine nanoparticles of Pt group metals are deposited around wavy and stepped bunches of Au nanoparticles of relatively large sizes. This ubiquitous strategy is expected to open a wide avenue for extending ATR surface-enhanced IR absorption spectroscopy to explore molecular adsorption and reactions on technologically important transition metals, as exemplified by successful real-time spectroscopic and electrochemical monitoring of the oxidation of CO at Pd and that of methanol at Pt nanofilm electrodes. The spectral features of free water molecules coadsorbed with CO on Pt, Pd, Rh, and Ru are also discussed.

In situ attenuated total reflection surface-enhanced infrared absorption spectroscopy in conjunction with H–D isotope replacement is used to investigate the dissociation and oxidation of CH3CH2OH on a Pd electrode in 0.1 M NaOH, with a focus on identifying the chemical nature of the pivotal intermediate in the so-called dual-pathway (C1 and C2) reaction mechanism. Real-time spectroelectrochemical measurements reveal a band at ∼1625 cm–1 showing up prior to the multiply bonded COad band. CH3CD2OH and D2O are used to exclude the spectral interference with this band from interfacial acetaldehyde and H2O, respectively, confirming for the first time that the ∼1625 cm–1 band is due to the adsorbed acetyl on the Pd electrode in alkaline media. The spectral results suggest that the as-adsorbed acetyl (CH3COad) is oxidized to acetate from approximately −0.4 V as the potential moves positively to conclude the C2 pathway. Alternatively, in the C1 pathway, the CH3COad is decomposed to α-COad and β-CH x species on the Pd electrode at potentials more negative than approximately −0.1 V; the α-COad species is oxidized to CO2 at potentials more positive than approximately −0.3 V, while the β-CH x species may be first converted to COad at approximately −0.1 V and further oxidized to CO2 at more positive potentials.

Designing high‐performance palladium (Pd) supports with enhanced ethanol oxidation reaction (EOR) activity has consistently been a challenge. Here, a novel anatase titanium dioxide nanosheets‐black phosphorus (ATN‐BP) hybrid is fabricated as a support for Pd nanoparticles used in the EOR. The direct ball‐milling of BP nanoflakes and ATN under argon protection lead to the formation of ATN‐BP hybrids with BP nanoflakes interconnected by cataclastic ATN with POTi bonds. The structure of ATN‐BP not only is beneficial for improving the electrolyte penetration and electron transportation but also has a strong influence on the stripping of reactive intermediates through the synergistic interaction between Pd and ATN‐BP. The results demonstrate that the Pd/ATN‐BP hybrids with heterointerfaces of Pd, BP, and ATN exhibit ultrahigh electroactivity and durability. In the EOR, the Pd/ATN‐BP catalyst can achieve an electrochemically active surface area of ≈462.1 m2 gPd−1 and a mass peak current density of 5023.8 mA mgPd−1, which are 11.67 and 6.87 times greater, respectively, than those of commercial Pd/C. The Pd/ATN‐BP catalysts also show remarkable stability with a retention rate of the peak current density of ≈30.6% after a durability test of 3600 s.

Overall benefits of EGFR‐TKIs are limited because these treatments are largely only for adenocarcinoma (ADC) with EGFR activating mutation. The treatments also usually lead to development of resistances. We have established a panel of patient‐derived xenografts (PDXs) from treatment naïve Asian NSCLC patients, including those containing “classic” EGFR activating mutations. Some of these EGFR‐mutated PDXs do not respond to erlotinib: LU1868 containing L858R/T790M mutations, and LU0858 having L858R mutation as well as c‐MET gene amplification, both squamous cell carcinoma (SCC). Treatment of LU0858 with crizotinib, a small molecule inhibitor for ALK and c‐MET, inhibited tumor growth and c‐MET activity. Combination of erlotinib and crizotinib caused complete response, indicating the activation of both EGFR and c‐MET promote its growth/survival. LU2503 and LU1901, both with wild‐type EGFR and c‐MET gene amplification, showed complete response to crizotinib alone, suggesting that c‐MET gene amplification, not EGFR signaling, is the main oncogenic driver. Interestingly, LU1868 with the EGFR L858R/T790M, but without c‐met amplification, had a complete response to cetuximab. Our data offer novel practical approaches to overcome the two most common resistances to EGFR‐TKIs seen in the clinic using marketed target therapies.

Ag nanoparticle films (simplified as nanofilms hereafter) on Si for electrochemical ATR surface enhanced IR absorption spectroscopy (ATR-SEIRAS) have been successfully fabricated by using chemical deposition, which incorporates initial embedding of Ag seeds on the reflecting plane of an ATR Si prism and subsequent chemical plating of conductive and SEIRA-active Ag nanofilms. Two alternative methods for embedding initial Ag seeds have been developed: one is based on self-assembly of Ag colloids on an aminosilanized Si surface, whereas the other the reduction of Ag+ in a HF-containing solution. A modified silver-mirror reaction was employed for further growth of Ag seeds into Ag nanofilm electrodes with a theoretically average thickness of 40-50 nm. Both Ag seeds and as-deposited Ag nanofilms display island structure morphologies facilitating SEIRA, as revealed by AFM imaging. The cyclic voltammetric feature of the as-prepared Ag nanofilm electrodes is close to that of a polycrystalline bulk Ag electrode. With thiocyanate as a surface probe, enhancement factors of ca. 50-80 were estimated for the as-deposited Ag nanofilms as compared to a mechanically polished Ag electrode in the conventional IRAS after reasonable calibration of surface roughness factor, incident angles, surface coverage, and polarization states. As a preliminary example for extended application, the pyridine adsorption configuration at an as-deposited Ag electrode was re-examined by ATR-SEIRAS. The results revealed that pyridine molecules are bound via N end to the Ag electrode with its ring plane perpendicular or slightly tilted to the local surface without rotating its C2 axis about the surface normal, consistent with the conclusion drawn by SERS in the literature.

Au colloids were used to fabricate nanoscale-tunable Au nanofilms on silicon for surface-enhanced IR absorption bases in both ambient and electrochemical environments. This wet process incorporates the self-assembly of colloidal Au monolayer using 3-aminopropyl trimethoxysilane as the organic coupler with subsequent chemical plating in an Au(III)/hydroxylamine solution. FTIR spectroscopy in transmission mode of the probe species SCN- was used to evaluate the apparent surface enhancement in IR absorption of 2D Au colloid arrays and chemically plated Au particles. The nanostructure of Au films was examined by atomic force microscopy. The IR and AFM results show that the apparent surface enhancement factor (1-2 orders of magnitude) increases with increasing sizes and/or contact, and the severe aggregation of Au nanoparticles may cause the bipolar band shape. Cyclic voltammetry on the Au nanofilm obtained by the above nucleation and growth strategy exhibits a feasible electrochemical stability and behavior. In situ ATR-FTIR measurement of p-nitrobenzoic acid adsorption demonstrates that the as-grown Au film yields rather promising surface enhancement as well.

No abstract

Th17 cells and CD4+CD25+ regulatory T (Treg) cells have been reported to share reciprocal developmental pathways but exhibit opposite effects, and the balance between them controls inflammation and autoimmune diseases. However, information regarding Th17/Treg cells in cancer-bearing hosts is still limited. In the present study, we investigated the distribution of Th17 cells in relation to Treg cells in gastric cancer patients, and evaluated how the imbalance in Th17/Treg cells in gastric cancer correlates with clinical and pathological parameters. We observed that the accumulation of Th17 and Treg cells in the tumor microenvironment was gradually increased according to disease progression, leading to an imbalance in Th17/Treg cells in gastric cancer patients. TGF-β and interleukin (IL)‑6 present in the gastric cancer microenvironment promoted the differentiation and expansion of Th17 cells, and increased numbers of Th17 cells promoted tumor progression through promotion of inflammation by secretion of IL-17. Treg cells promoted tumor progression by helping cancer cells escape from host immunosurveillance by secreting TGF-β, and a high level of TGF-β in the tumor microenvironment promoted differentiation and expansion of Treg cells. In conclusion, the imbalance in Th17/Treg cells was involved in the development and progression of gastric cancer. A better understanding of the nature, regulation, and function of Th17 and Treg cells in tumor immunity may aid in the development of novel and effective immunotherapy for gastric cancer.