As a practical and effective tool for quantitative in-plane deformation measurement of a planar object surface, two-dimensional digital image correlation (2D DIC) is now widely accepted and commonly used in the field of experimental mechanics. It directly provides full-field displacements to sub-pixel accuracy and full-field strains by comparing the digital images of a test object surface acquired before and after deformation. In this review, methodologies of the 2D DIC technique for displacement field measurement and strain field estimation are systematically reviewed and discussed. Detailed analyses of the measurement accuracy considering the influences of both experimental conditions and algorithm details are provided. Measures for achieving high accuracy deformation measurement using the 2D DIC technique are also recommended. Since microscale and nanoscale deformation measurement can easily be realized by combining the 2D DIC technique with high-spatial-resolution microscopes, the 2D DIC technique should find more applications in broad areas.

No abstract

Digital Image Correlation (DIC) is a flexible and effective technique to measure the displacements on specimen surfaces by matching the reference subsets in the undeformed image with the target subsets in the deformed image. With the existing DIC techniques, the user must rely on experience and intuition to manually define the size of the reference subset, which is found to be critical to the accuracy of measured displacements. In this paper, the problem of subset size selection in the DIC technique is investigated. Based on the Sum of Squared Differences (SSD) correlation criterion as well as the assumption that the gray intensity gradients of image noise are much lower than that of speckle image, a theoretical model of the displacement measurement accuracy of DIC is derived. The theoretical model indicates that the displacement measurement accuracy of DIC can be accurately predicted based on the variance of image noise and Sum of Square of Subset Intensity Gradients (SSSIG). The model further leads to a simple criterion for choosing an optimal subset size for the DIC analysis. Numerical experiments have been performed to validate the proposed concepts, and the calculated results show good agreements with the theoretical predictions.

Fringe patterns in optical metrology systems need to be demodulated to yield the desired parameters. Time-frequency analysis is a useful concept for fringe demodulation, and a windowed Fourier transform is chosen for the determination of phase and phase derivative. Two approaches are developed: the first is based on the concept of filtering the fringe patterns, and the second is based on the best match between the fringe pattern and computer-generated windowed exponential elements. I focus on the extraction of phase and phase derivatives from either phase-shifted fringe patterns or a single carrier fringe pattern. Principles as well as examples are given to show the effectiveness of the proposed methods.

The nonlinear intensity response of a digital fringe projection profilometry (FPP) system causes the captured fringe patterns to be nonsinusoidal waveforms and leads to an additional phase measurement error for commonly used three- and four-step phase-shifting algorithms. We perform theoretical analysis of the phase error owing to the nonsinusoidal waveforms. Based on the derived theoretical model, a novel and simple iterative phase compensation algorithm is proposed to compensate the nonsinusoidal phase error. Experiments show that the proposed algorithm can be used for effective phase error compensation in practical phase-shifting FPP.