Tuning reagent and catalyst concentrations is crucial in the development of efficient catalytic transformations. In enzyme-catalysed reactions the substrate is bound-often by multiple non-covalent interactions-in a well-defined pocket close to the active site of the enzyme; this pre-organization facilitates highly efficient transformations. Here we report an artificial system that co-encapsulates multiple catalysts and substrates within the confined space defined by an M12L24 nanosphere that contains 24 endohedral guanidinium-binding sites. Cooperative binding means that sulfonate guests are bound much more strongly than carboxylates. This difference has been used to fix gold-based catalysts firmly, with the remaining binding sites left to pre-organize substrates. This strategy was applied to a Au(I)-catalysed cyclization of acetylenic acid to enol lactone in which the pre-organization resulted in much higher reaction rates. We also found that the encapsulated sulfonate-containing Au(I) catalysts did not convert neutral (acid) substrates, and so could have potential in the development of substrate-selective catalysis and base-triggered on/off switching of catalysis.

Mustard gas, bis(β-chloroethyl) sulfide (HD), is highly toxic and harmful to humans and the environment. It comprises one class of chemical warfare agents (CWAs) that was used in both World Wars I and II. The three basic analogues or surrogates are: the monochloro derivative, known as the half mustard, 2-chloroethyl ethyl sulfide (CEES); an oxygen analogue, bis(β-chloroethyl) ether (BCEE); and several nitrogen analogues based on the 2,2'-dichlorodiethylamine framework (e.g., HN1, HN2, and HN3). The origin of their toxicity is considered to be from the formation of three-membered heterocyclic ions, a reaction that is especially accelerated in aqueous solution. The reaction of these cyclic ion intermediates with a number of important biological species such as DNA, RNA and proteins causes cell toxicity and is responsible for the deleterious effects of the mustards. While a number of studies have been performed over the last century to determine the chemistry of these compounds, early studies suffered from a lack of more sophisticated NMR and X-ray techniques. It is now well-established that the sulfur and nitrogen mustards are highly reactive in water, while the oxygen analog is much more stable. In this study, we review and summarize results from previous studies, and add results of our own studies of the reactivity of these mustards toward various nonaqueous solvents and nucleophiles. In this manner a more comprehensive evaluation of the stability and reactivity of these related mustard compounds is achieved.

Cleft of center: The self fine‐tuning π‐deficient cleft of 1,3‐dichloro‐substituted tetraoxacalix[2]arene[2]triazine forms noncovalent π–halide and π–lone‐pair‐electron interactions with halides Cl− and Br−, and water, giving rise to ternary complexes in the solid state (see structure, N blue). In solution, the host molecule, formed by a different mechanism, complexes with fluoride, giving Ka (1:1) of over 4000 M−1.

Interactive halides: Bis(tetraoxacalix[2]arene[2]triazine), a conformationally rigid cage molecule of three V‐shaped electron‐deficient clefts, forms 1:1 complexes with fluoride (361 M−1), chloride (146 M−1) and bromide (95 M−1) in acetonitrile. Different anion–π interactions along with multiple hydrogen bonding, halogen bonding and lone‐pair‐electrons–π interactions directed the formation of different molecular assemblies (an example is shown here).

Aqueous solutions of a poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) triblock copolymer, Pluronic F108 (PEO133PPO50PEO133), ranging from 1 to 35 wt %, were studied with differential scanning microcalorimetry and rheology. The thermoreversible micellization and gelation were examined through a heating process and a subsequent cooling process at a fixed rate of 1 °C/min. The critical micellization temperature (CMT), determined by the onset temperature of the endothermic peak in the heating process, was a decreasing function of the F108 concentration. A small secondary endothermic peak appeared only when the polymer concentration was 22.5 wt % or higher, indicating that there was a sol–gel transition but that the gelation was a nearly athermic process. Upon heating, an abrupt increase was observed in both the dynamic storage modulus (G′) and dynamic loss modulus (G″) within a narrow temperature range. TG′, the temperature for the transition in G′, was a linear decreasing function of the polymer concentration and different from CMT. TG′ tended to approach CMT with an increasing F108 concentration. Beyond this transition, G′ reached a plateau, and the plateau increased in height and broadened with the polymer concentration. The value of G′ at 70 °C (G′70) could be approximately scaled with concentration c by G′70 ∝ c7.3. In addition, the definition for a gel to obey G′ > G″ was valid only when c was greater than 22.5 wt %, and this was in agreement with the secondary endothermic peak found with differential scanning calorimetry. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2014–2025, 2004

The first two cage based crystalline covalent organic frameworks, cage-COF-1 and cage-COF-2, were constructed from a prism-like three-aldehyde-containing molecular cage. The cage contains two horizontal phloroglucinol and three vertical triazine moieties forming three identical V-shaped cavities. By reacting with p-phenylenediamine and 4,4′-biphenyldiamine, the two cage-COFs were formed with a hexagonal skeleton and possess a unique structure. Due to the pillared cage nodes, the linkers are hanging with their π-surfaces but not C–H sites exposed to the pore, and enjoy certain rotational dynamics as suggested by 13C CP/MAS NMR. The antidirection of the diimine linkages leads to rippled layers which pack in unique ABC mode through alternate stacking of the cage twosided faces in both AB and AC layers. Such packing forms trigonal channels along c axis which are interconnected in ab plane due to the large open space created across the hanging linkers, resembling the porous characteristics of 3D COFs. The cage-COFs have a permanent porosity and can adsorb CO2 facilitated by the intrinsic cage cavities that serve as prime adsorption sites. The unprecedented cage-COFs not only merge the borderline of 2D and 3D COFs but also bridge porous organic cages to extended crystalline organic frameworks.

The effects of a PPO-PEO-PPO triblock copolymer (25R4, PO(19)-EO(33)-PO(19)) on thermoreversible micellization and gelation properties of a PEO-PPO-PEO triblock copolymer (F108, EO(133)-PO(50)-EO(133)) in water were studied by means of micro-DSC and rheology. A complete, mirror-image like thermoreversible behavior has been observed for all of the samples with various molar ratios of 25R4 to F108. At a given concentration of F108, the addition of 25R4 results in the salt-out like effect on the primary micellization of F108; that is, the critical micellization temperature (CMT) of F108 shifts to lower temperatures with increasing the content of 25R4. The enthalpy changes for micellization are a linear function of the 25R4/F108 molar ratio at a fixed F108 concentration. Beyond the primary peak for the micellization of F108, a secondary peak or shoulder is observed in the DSC curves for the samples with the higher 25R4/F108 molar ratios, due to the formation of the hydrophobic aggregates from both the PPO blocks of F108 and those (i.e., PPO blocks) of 25R4. Furthermore, as an example, the dynamic viscoelastic properties of 18 wt % F108 solutions with various contents of 25R4 have been examined. It is found that, when the 25R4/F108 molar ratio < or =1, 25R4 does not affect the gelation of F108 notably. When the ratio is greater than 1, however, the formation of the 25R4-bridged micellar aggregates delays the gelation of F108 significantly. A schematic model has been proposed to explain the mechanism for the 25R4-influenced micellization and gelation of F108.

Benzene triimide (BTI, or mellitic triimide) is a C 3-symmetric backbone with a highly electron-deficient, extended π surface and three easy functionalization sites. Here, we report the first BTI-based cage composed of two face-to-face BTIs pillared by three m-xylylene spacers and efficient and selective binding of azide through cooperative anion−π interactions. The cage was easily synthesized in two steps from benzene triimide. Crystal structures showed that the two BTI planes can be separated at about 5–6 Å and form a well-defined electron-deficient cavity. Among a series of anions tested, the cage was found able to bind N3 –, SCN–, and I–. In particular, the binding toward N3 – is very strong (K a = 11098 ± 46 M–1) and highly selective, over 150 and 250 times higher than SCN– and I–, respectively. The control single BTI, however, showed only very weak binding (K a < 5 M–1). The crystal structure showed that N3 – is tightly trapped within the cavity through multiple, very short anion−π interactions. The slow enter–release of N3 – from the cavity was observed in the NMR. The charge-transfer and electron-transfer character of the interactions was also discussed.