No abstract

No abstract

No abstract

Ce-doped Pb 1Àx Ce x Te alloys with x = 0, 0.005, 0.01, 0.015, 0.03, and 0.05 were prepared by induction melting, ball milling, and spark plasma sintering techniques. The structure and thermoelectric properties of the samples were investigated. X-ray diffraction (XRD) analysis indicated that the samples were of single phase with NaCl-type structure for x less than 0.03. The lattice parameter a increases with increasing Ce content. The lower Ce-doped samples (x = 0.005 and 0.01) showed p-type conduction, whereas the pure PbTe and the higher doped samples (x = 0, 0.015, 0.03, and 0.05) showed n-type conduction. The lower Ce-doped samples exhibited a much higher absolute Seebeck coefficient, but the higher electrical resistivity and higher thermal conductivity compared with pure PbTe resulted in a lower figure of merit ZT. In contrast, the higher Ce-doped samples exhibited a lower electrical resistivity, together with a lower absolute Seebeck coefficient and comparable thermal conductivity, leading to ZT comparable to that of PbTe. The lowest thermal conductivity (range from 0.99 W m À1 K À1 at 300 K to 0.696 W m À1 K À1 at 473 K) was found in the alloy Pb 0.95 Ce 0.05 Te due to the presence of the secondary phases, leading to a ZT higher than that of pure PbTe above 500 K. The maximum figure of merit ZT, in the alloy Pb 0.95 Ce 0.05 Te, was 0.88 at 673 K.

Martensitic transformation and magnetic entropy change in Co substituted Ni 50 Mn 35−x Co x Sn 15 (x = 0, 1.0, 1.5, 2.0, and 3.0) Heusler alloys have been investigated by X-ray powder diffraction analysis, differential scanning calorimetry, and magnetic measurements. X-ray diffraction analysis reveals that the Ni 50 Mn 35−x Co x Sn 15 alloys have L2 1 Heusler structure at room temperature. The phase decomposition of the sample with x = 3.0, after annealing 48 h at 1173 K, is confirmed by both Xray powder diffraction analysis and energy-dispersive x-ray spectroscopy in scanning electron microscopy. With the increase of the Co content from 0 to 2.0, the martensitic transformation temperature T M increases from 185 to 245 K, which is in good agreement with the rule of valence electron concentration e/a-dependence of T M . The magnetic entropy change ΔS M is investigated in the vicinity of the martensitic transformation.