In this paper, we propose and numerically demonstrate a new way to realize superfocusing of terahertz waves via the spoof surface plasmons (SSP). With the assist of a modified subwavelength metallic grating, a near-field rapid oscillation can be formed, originating from the Fabry-Perot resonances due to the reflection of SSP waves at terminations. We show that the field pattern of oscillation on textured metallic surface can be engineered by adjusting groove width and grating number. This produces a desired modulation of phase and amplitude for the radiationless electromagnetic interference (REI) focusing. The effective focusing depth through the corrugated metal is evaluated by the full-width-half-maximum (FWHM) beamwidth. At the situation of third-order Fabry-Perot resonance, the FWMH reaches up to 0.069λ at a distance of 0.1λ, improving the beamwidth by more than 540% compared with a single slit. The FWHM is optimized to 0.06λ as the order of Fabry-Perot resonance becomes seven, leading to the superfocusing metric of 1.67. On the basis of this, we further show the focusing ability can be held on the ultra-thin metallic grating. Two-dimensional subwavelength focusing behavior is also numerically verified. Our study may extend the working distance of sensing and super-resolution imaging devices at terahertz frequency.

Spoof surface plasmon (SSP) meta-couplers that efficiently integrate other diversified functionalities into a single ultrathin device are highly desirable in the modern microwave and terahertz fields. However, the diversified functionalities, to the best of our knowledge, have not been applied to circular polarization meta-couplers because of the spin coupling between the orthogonal incident waves. In this paper, we propose and numerically demonstrate a terahertz spin-decoupled bifunctional meta-coupler for SSP excitation and beam steering. The designed meta-coupler is composed of a coupling metasurface and a propagating metasurface. The former aims at realizing anomalous reflection or converting the incident waves into SSP under the illumination of the left or right circular polarization waves, respectively, and the latter are used to guide out the excited SSP. The respective converting efficiency can reach 82% and 70% at 0.3THz for the right and left circular polarization incident waves. Besides, by appropriately adjusting the reflection phase distribution, many other diversified functionalities can also be integrated into the meta-coupler. Our study may open up new routes for polarization-related SSP couplers, detectors, and other practical terahertz devices.

The coupling between surface plasmons and free electrons may be used to amplify waves or accelerate particles. Nonetheless, such an interaction is usually weak due to the small interaction length or velocity mismatching. Here a mechanism for enhancing the coupling between plasmonic fields and relativistic electrons is proposed. By using a weakly gradient meta-surface that supports the spoof surface-plasmons (SSP), the phase velocity of SSP mode can be manipulated and quasi-velocity-matching between SSP and electrons may be achieved. The dynamic coupling equations suggest that, due to the strong coupling, the energy can be extracted continuously from the relativistic electrons. The sustained increase of SSP in a narrow frequency band has been demonstrated by the particle-in-cell simulations, where the output power of SSP attains 65 W at 1 THz (with 28 mm interaction length) and the coupling efficiency is enhanced by two orders of magnitude. The results may find potential applications for designing new compact and efficient THz wave sources.

The stability of the millimeter-wave gyrotron-traveling-wave-tube (gyro-TWT) amplifier can be effectively improved via controlling the propagation characteristics of the operating modes using lossy dielectric-lined (DL) waveguide. Self-consistent nonlinear theory of the electron cyclotron maser (ECM) interaction in lossy DL circuit is developed based on a full-wave study of the propagation characteristics of the DL waveguide. This nonlinear theory fully takes into consideration the waveguide structure and the lossy dielectric characteristics. It is capable of accurately calculating the ECM instability between a cyclotron harmonic and a circular polarized mode, and effectively predicting the nonlinear stability of the DL waveguide-based gyro-TWT. Systematic investigation of a Ka-band TE01 mode DL waveguide-based gyro-TWT is carried out, and numerical calculation reveals a series of interesting results. This work provides a basic theoretical tool for further exploring the application of the lossy DL waveguide in millimeter-wave gyro-TWTs.