a b s t r a c tThe present paper evaluates the fatigue life of ductile nodular cast iron EN-GJS-400-18LT with four different microstructures. Characterisation of the graphite morphology and the matrix microstructure is performed on 50 samples for every material type. Tensile stress-strain curves, symmetrical and unsymmetrical stress-strain hysteresis loops, cyclic stress-strain curves, crack resistance curves and fatigue life curves of these four microstructures are obtained. Experimental results show that size, shape and distribution of the graphite nodules has no significant influence on cyclic hardening of the material but they play a great role in the crack initiation and propagation process. It is shown that the larger irregularly shaped nodules reduce fracture toughness and fatigue strength. Furthermore, the results demonstrated that pearlitic phase does not strongly affect fatigue life if its proportion does not exceed 10%. The monitoring of crack length during the tests is performed by an optical method developed in the present work.

This paper presents an experimental and numerical study on two different types of the nodular cast iron EN-GJS-400-18-LT. The experimental procedure includes symmetrical and unsymmetrical strain controlled tests on the cylindrical specimens as well as crack initiation and propagation tests on the compact tension and single edged notched specimens. Different loading regimes are applied, and monitoring of the crack length during the tests is performed by an optical system. Within the framework of numerical investigations an efficient algorithm for modelling of cyclic plasticity is examined. Experimental results show that two material types have significantly different the crack behaviour.

Study presented in this paper is concerned with fatigue crack initiation detection, crack propagation observation and measurement as well as with numerical simulation of damage accumulation and propagation in the nodular cast iron grade EN-GJS-400-18-LT. Material properties of nodular cast iron are well elaborated in previous authors' papers. Crack initiation and its propagation observation as well as crack length measurement is performed on standardized specimens using ARAMIS 4M optical system. Based on the experimental results, a new three-dimensional constitutive model is proposed to simulate the low-cycle fatigue behaviour of considered material. An efficient algorithm for modelling cyclic plasticity is used for performing numerical simulation of crack initiation and growth on standardized specimens made from nodular cast iron. The computational procedure accuracy is verified by comparing the computed results with the real experimental data.

This paper presents an experimental and numerical study of the crack initiation and propagation in the nodular cast iron grade EN-GJS-400-18-LT. Therein, non-contact Digital Image Correlation is used to study the development of the tensile damage along the crack path and to identify the crack tip position. Based on the experimental results, a new three-dimensional constitutive model is proposed to simulate the low-cycle fatigue behaviour of considered material. Within the framework of numerical investigations the cyclic plasticity model together with the damage initiation and evolution criteria are applied to study the fatigue damage in the compact tension specimen near the notch and the crack tip. The computational procedure accuracy is verified by comparing the computed results with the real experimental data. After successful application of the digital image correlation technique to identify the crack tip position, the next step is to investigate the development of the dissipated energy along the crack path using the infrared thermography.

An experimental and numerical study of the cyclic deformation and low-cycle fatigue behaviour of the aluminium alloy AlCu5BiPb–T8 is presented. The experimental program included monotonic tensile tests, symmetric and unsymmetric strain-controlled fatigue tests, fracture toughness tests, as well as fatigue crack initiation and propagation tests. Within the framework of numerical investigations an efficient algorithm for modelling of cyclic plasticity is proposed. This algorithm is implemented into the finite element program ABAQUS and applied to the analysis of a crack growth near the notch. The accuracy of the computational procedure is tested by comparing the computed results with the real experimental data.