Automatic control technology for energy savings is no stranger to social life. Negligence in turning off lights and air conditioners in class is one example of the waste of electricity that occurs in school and campus institutions. By using the PIR (Passive Infra Red) sensor and LDR (Light Dependent Resistor) on the automatic control system of lights and air conditioners, it is expected to reduce excess electricity consumption. All uses of sensors are connected directly to Arduino Nano as the center of automatic system controllers. Software design uses the basic programming language C Arduino and utilizes the timer library function which functions as a room timer. From the results of the research, this tool can already be used as an automation while saving electricity consumption in the use of electronic devices such as lights and air conditioners.
─PDAM is still using analog flow meter. For PDAM customers, the information on analog flow meter are difficult to access and converted into payment amount. The system with analog read, PDAM officer was recorded by manual methods of data customer on the amount of water consumption. In this research using a water flow sensor YF-S201. Microcontroller ATmega328 receives the output pulses from the sensor. LCD is display information usage amount, time and date in real time. The module IComSat v1.1-SIM900 GSM / GPRS Shield SMS sending SMS based commands received from the customer and PDAM officer. The results achieved in this research is a sensor YF-S201 is able to read the amount of water consumed PDAM customers with an average deviation of 0.39%. The tests showed the result of conversion of payment are in accordance with the PDAM payment model in Gianyar district. Intisari─PDAM hingga saat ini masih menggunakan flow meter analog. Bagi pelanggan PDAM, Informasi pada flow meter analog sulit diakses dan dikonversi menjadi jumlah pembayaran. Dengan sistem pembacaan analog, petugas PDAM masih mencatat dengan metode manual data jumlah konsumsi air pelanggan. Pada penelitian ini menggunakan flow water sensor YF-S201. Mikrokontroler ATmega328 menerima output pulsa dari sensor. LCD menampilkan informasi jumlah pemakaian, waktu dan tanggal secara real time. Modul IComSat v1.1-SIM900 GSM/GPRS Shield SMS mengirim SMS berdasarkan perintah yang diterima dari pelanggan dan petugas PDAM. Hasil yang dicapai dalam penelitian ini adalah sensor YF-S201 mampu membaca jumlah konsumsi air pelanggan PDAM dengan rata-rata penyimpangan sebesar 0,39 %. Pengujian menunjukkan hasil konversi pembayaran sudah sesuai dengan model pembayaran PDAM di Kabupaten Gianyar.
Saat ini tidak sedikit masyarakat Indonesia bekerja sebagai pembudidaya ikan salah satunya ikan koi. Hal ini dikarenakan keuntungan yang diperoleh dari penjualan ikan koi sangat menjanjikan. Faktor utama berhasilnya penjualan ikan koi adalah kualitas ikan dari hasil budidaya itu sendiri. Untuk mendapatkan hasil budidaya berkualitas, tentunya kolam-kolam tersebut harus selalu dalam keadaan bersih (memiliki tingkat kekeruhan air < 400 NTU). Oleh karena itu dibuatlah suatu sistem untuk dapat memonitoring tingkat kekeruhan air dan pemberi pakan otomatis pada kolam budidaya ikan koi dengan tujuan membantu pembudidaya ikan koi meningkatkan kualitas hasil budidaya mereka. Prinsip kerja sistem monitoring tingkat kekeruhan air kolam budidaya koi ini adalah dengan membaca nilai kekeruhan air kolam menggunakan sensor kekeruhan (Turbidity Sensor). Pembacaan nilai sensor tersebut akan diproses mikrokontroler NodeMCU kemudian mengaktifkan modul relay pompa drainase untuk menguras air keruh. Di sisi lain terdapat sensor jarak yang akan mengukur ketinggian air kolam. Pada saat air kolam sudah terkuras, maka sensor jarak akan mengirimkan sinyal ke mikrokontroler NodeMCU untuk mengaktifkan modul relay pompa distribusi, sehingga dapat mendistribusikan air bersih dari tangki air menuju kolam. Dengan demikian, air kolam budidaya akan selalu dalam keadaan bersih. Sementara itu, untuk pemberi pakan otomatis bekerja dengan menggunakan modul RTC (Real Time Clock) di mana waktu pemberian pakan akan di-setting pada modul ini. Kemudian, output berupa waktu dari modul RTC akan diproses mikrokontroler NodeMCU yang kemudian mengirimkan sinyal menuju servo sebagai penggerak tuas tempat pakan ikan. Apabila sudah waktunya pemberian pakan, sesuai dengan program yang diberikan maka tuas pakan ikan akan terbuka. Dengan demikian, pemberian pakan dapat dilakukan secara otomatis. Kata Kunci — IoT, monitoring, kekeruhan, pakan, kolam, ikan koi.
Intisari— Dalam perkembangan teknologi, penerapan sistem otomatis mulai marak diterapkan dalam berbagai bidang. Sistem otomatis mampu memberikan kemudahan dalam penerapannya, baik dari segi efisiensi waktu dan tenaga. Peneliti merancang sebuah perangkat yang mampu bekerja secara otomatis untuk melakukan proses penyiraman tanaman berdasarkan pada keadaan tanah dari tanaman tersebut. Sistem otomatis yang dirancang oleh peneliti menggunakan mikrokontroler Arduino Mega 2560 sebagai kendali utama dan soil moisture sensor untuk mendeteksi tingkat kelembaban tanah. Proses penyiraman tanaman terjadi berdasarkan tingkat kelembaban yang telah dideteksi oleh soil moisture sensor. Berdasarkan pada pengujian yang telah dilakukan, proses penyiraman dilakukan saat tingkat kelembaban tanah bernilai kurang dari 20%. Sedangkan, ketika tingkat kelembaban tanah bernilai lebih dari 20%, maka proses penyiraman akan berhenti. Kata Kunci—Arduino Mega 2560, Soil Moisture Sensor, Sistem Otomatis, Mangga Harum Manis
Along with technological developments, various technological innovations have begunto emerge that can be applied to facilitate individual or group work. One of them is the use ofappropriate technology, namely the use of technology in a field that can provide real benefit.Researchers designed an automatic watering system using RTC (Real time clock) based on theArduino Mega 2560 microcontroller. This watering system works automatically based on aspecified watering schedule according to the user's wishes. Users can set the watering timeeasily because the system is equipped with a keypad. Based on the results of tests carried out,the watering process occurs, when the time displayed on the LCD is the same as the timesetting given. Long watering duration of approximately 1 minute.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.