The paper discusses the redesign of a high-speed turbocharger for improved bearing life and mechanical operation. The bearings were changed from a pair of combination journal/thrust bearings to a pair of redesigned journal bearings with double acting thrust bearing at the center of the unit. Internal oil passages, drain cavities, and seals were also revised. These modifications resulted in reduced oil leakage across end seals, reduced coke buildup at the turbine, increased thrust load capacity, and improved rotordynamics. Both the analytical and experimental results, which consisted of bearing performance and vibration data of original and modified systems are presented.
The paper discusses the redesign of a high-speed turbocharger for improved bearing life and mechanical operation. The modifications resulted in reduced oil leakage across the end seal, reduced coke buildup at the turbine, increased thrust load capacity, and improved rotordynamics. In particular, rotordynamic stability was improved by eliminating subsynchronous vibration at the operating speed. The redesign consisted of changing the bearings from a pair of combination journal/thrust bearings to a pair of journal bearings and a double acting thrust bearing at the center of the unit. The active thrust bearing was moved away from the hot turbine end of the machine. The thrust bearing geometry was modified for increased minimum film thickness, reduced metal temperature, and increased load capacity. Inlet and drain passages were revised for better oil flow distribution. Unit rotordynamics were improved by upgrading the journal bearings from three-axial-groove to three-lobe design. The upgraded unit kept the same footprint as the original design with only piping modifications required.
Extensive analysis and testing were conducted. Testing of the original and revised turbochargers showed improvements in the redesign with reduced bearing metal temperatures and improved rotordynamic stability. Theoretical results along with test data consisting of bearing performance and vibration data of the original and modified system are presented in this paper.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.