A process is described to manufacture monodisperse asymmetric pH-responsive nanochannels with very high densities (pore density >2 × 10(14) pores per m(2)), reproducible in m(2) scale. Cylindric pores with diameters in the sub-10 nm range and lengths in the 400 nm range were formed by self-assembly of metal-block copolymer complexes and nonsolvent-induced phase separation. The film morphology was tailored by taking into account the stability constants for a series of metal-polymer complexes and confirmed by AFM. The distribution of metal-copolymer micelles was imaged by transmission electron microscopy tomography. The pH response of the polymer nanochannels is the strongest reported with synthetic pores in the nm range (reversible flux increase of more than 2 orders of magnitude when switching the pH from 2 to 8) and could be demonstrated by cryo-field emission scanning electron microscopy, SAXS, and ultra/nanofiltration experiments.

An integral asymmetric membrane was fabricated in a fast and one-step process by combining the self-assembly of an amphiphilic block copolymer (PS-b-P4VP) with nonsolvent-induced phase separation. The structure was found to be composed of a thin layer of densely packed highly ordered cylindrical channels with uniform pore sizes perpendicular to the surface on top of a nonordered sponge-like layer. The as-assembled membrane obtained a water flux of more than 3200 L m–2 h–1 bar–1, which was at least an order of magnitude higher than the water fluxes of commercially available membranes with comparable pore sizes, making this membrane particularly well suited to size-selective and charge-based separation of biomolecules. To test the performance of the membrane, we conducted diffusion experiments at the physiological pH of 7.4 using bovine serum albumin (BSA) and globulin-γ, two proteins with different diameters but too close in size (2-fold difference in molecular mass) to be efficiently separated via conventional dialysis membrane processes. The diffusion rate differed by a factor of 87, the highest value reported to date. We also analyzed charge-based diffusive transport and separation of two proteins of similar molecular weight (BSA and bovine hemoglobin (BHb)) through the membrane as a function of external pH. The membrane achieved a selectivity of about 10 at pH 4.7, the isoelectric point (pI) of BSA. We then positively charged the membrane to improve the separation selectivity. With the modified membrane BSA was completely blocked when the pH was 7.0, the pI of BHb, while BHb was completely blocked at pH 4.7. Our results demonstrate the potential of our asymmetric membrane to efficiently separate biological substances/pharmaceuticals in bioscience, biotechnology, and biomedicine applications.

The supramolecular assembly of PS-b-P4VP copolymer micelles induced by selective solvent mixtures was used to manufacture isoporous membranes. Micelle order in solution was confirmed by cryo-scanning electron microscopy in casting solutions, leading to ordered pore morphology. When dioxane, a solvent that interacts poorly with the micelle corona, was added to the solution, polymer-polymer segment contact was preferential, increasing the intermicelle contact. Immersion in water gave rise to asymmetric porous membranes with exceptional pore uniformity and high porosity. The introduction of a small number of carbon nanotubes to the casting solution improved the membrane stability and the reversibility of the gate response in the presence of different pH values.

We fabricated block copolymer hollow fiber membranes with self-assembled, shell-side, uniform pore structures. The fibers in these membranes combined pores able to respond to pH and acting as chemical gates that opened above pH 4, and catalytic activity, achieved by the incorporation of gold nanoparticles. We used a dry/wet spinning process to produce the asymmetric hollow fibers and determined the conditions under which the hollow fibers were optimized to create the desired pore morphology and the necessary mechanical stability. To induce ordered micelle assembly in the doped solution, we identified an ideal solvent mixture as confirmed by small-angle X-ray scattering. We then reduced p-nitrophenol with a gold-loaded fiber to confirm the catalytic performance of the membranes.

No abstract