Abstract-Global Navigation Satellite System Reflectometry (GNSS-R) is a multi-static radar using navigation signals as signals of opportunity. It provides wide-swath and improved spatio-temporal sampling over current space-borne missions. The lack of experimental datasets from space covering signals from multiple constellations (GPS, GLONASS, Galileo and Beidou) at dual-band (L1 and L2), and dual-polarization (Right and Left Hand Circular Polarization: RHCP and LHCP), over the ocean, land and cryosphere remains a bottleneck to further develop these techniques. 3

This article introduces 3 Cat-1, the first project of the Technical University of Catalonia to build and launch a nano-satellite. Its main scope is to develop, construct, assemble, test and launch into a low Earth orbit a CubeSat with seven different payloads (mono-atomic oxygen detector, graphene field-effect transistor, self-powered beacon, Geiger radiation counter, wireless power transfer (WPT), new topology solar cells and WPT experiment), all fitted in a single-unit CubeSat. On one hand, this is mainly an educational project in which the development of some of the subsystems is carried out by undergraduate and postgraduate students. The satellite demonstrates its capabilities as a cost-effective platform to perform small scientific experiments and to demonstrate some of the new technologies that it incorporates.

No abstract

This paper reports and discusses the design and ground tests of a CubeSat payload which allows to measure, in-situ and in real time, the degradation of a polymer of electronic interest due to atomic oxygen etching in LEO. It provides real-time information on how the degradation occurs, eliminating the need to work with samples recovered once the mission has finished. The polymer, TIPS-Pentacene, is deposited on the surface of a microelectromechanical (MEMS) cantilever, which works as a resonator embedded in a Pulsed Digital Oscillator circuit. The mass losses in the polymer due to atomic oxygen corrosion produce variations in the resonant frequency of the MEMS, which is continuously sensed by the circuit and transmitted to the ground. This way, polymer mass losses around 10-12 kg can be detected during the mission. The payload is a part of the 3Cat-1 mission, a nano-satellite aimed at carrying out several scientific experiments.Peer ReviewedPostprint (author's final draft