[1] The possibility of using shape mixtures of randomly oriented spheroids for modeling desert dust aerosol light scattering is discussed. For reducing calculation time, look-up tables were simulated for quadrature coefficients employed in the numerical integration of spheroid optical properties over size and shape. The calculations were done for 25 bins of the spheroid axis ratio ranging from $0.3 (flattened spheroids) to $3.0 (elongated spheroids) and for 41 narrow size bins covering the size parameter range from $0.012 to $625. The look-up tables were arranged into a software package, which allows fast, accurate, and flexible modeling of scattering by randomly oriented spheroids with different size and shape distributions. In order to evaluate spheroid model and explore the possibility of aerosol shape identification, the software tool has been integrated into inversion algorithms for retrieving detailed aerosol properties from laboratory or remote sensing polarimetric measurements of light scattering. The application of this retrieval technique to laboratory measurements by Volten et al. (2001) has shown that spheroids can closely reproduce mineral dust light scattering matrices. The spheroid model was utilized for retrievals of aerosol properties from atmospheric radiation measured by AERONET ground-based Sun/sky-radiometers. It is shown that mixtures of spheroids allow rather accurate fitting of measured spectral and angular dependencies of observed intensity and polarization. Moreover, it is shown that for aerosol mixtures with a significant fraction of coarse-mode particles (radii ! $1 mm), the nonsphericity of aerosol particles can be detected as part of AERONET retrievals. The retrieval results indicate that nonspherical particles with aspect ratios $1.5 and higher dominate in desert dust plumes, while in the case of background maritime aerosol spherical particles are dominant. Finally, the potential of using AERONET derived spheroid mixtures for modeling the effects of aerosol particle nonsphericity in other remote sensing techniques is discussed. For example, the variability of lidar measurements (extinction to backscattering ratio and signal depolarization ratio) is illustrated and analyzed. Also, some potentially important differences in the sensitivity of angular light scattering to parameters of nonspherical versus spherical aerosols are revealed and discussed.Citation: Dubovik, O., et al. (2006), Application of spheroid models to account for aerosol particle nonsphericity in remote sensing of desert dust,

The MODIS Level-2 cloud product (Earth Science Data Set names MOD06 and MYD06 for Terra and Aqua MODIS, respectively) provides pixel-level retrievals of cloud-top properties (day and night pressure, temperature, and height) and cloud optical properties (optical thickness, effective particle radius, and water path for both liquid water and ice cloud thermodynamic phases-daytime only). Collection 6 (C6) reprocessing of the product was completed in May 2014 and March 2015 for MODIS Aqua and Terra, respectively. Here we provide an overview of major C6 optical property algorithm changes relative to the previous Collection 5 (C5) product. Notable C6 optical and microphysical algorithm changes include: (i) new ice cloud optical property models and a more extensive cloud radiative transfer code lookup table (LUT) approach, (ii) improvement in the skill of the shortwave-derived cloud thermodynamic phase, (iii) separate cloud effective radius retrieval datasets for each spectral combination used in previous collections, (iv) separate retrievals for partly cloudy pixels and those associated with cloud edges, (v) failure metrics that provide diagnostic information for pixels having observations that fall outside the LUT solution space, and (vi) enhanced pixel-level retrieval uncertainty calculations. The C6 algorithm changes collectively can result in significant changes relative to C5, though the magnitude depends on the dataset and the pixel's retrieval location in the cloud parameter space. Example Level-2 granule and Level-3 gridded dataset differences between the two collections are shown. While the emphasis is on the suite of cloud optical property datasets, other MODIS cloud datasets are discussed when relevant.

A data library is developed containing the scattering, absorption, and polarization properties of ice particles in the spectral range from 0.2 to 100 μm. The properties are computed based on a combination of the Amsterdam discrete dipole approximation (ADDA), the T-matrix method, and the improved geometric optics method (IGOM). The electromagnetic edge effect is incorporated into the extinction and absorption efficiencies computed from the IGOM. A full set of single-scattering properties is provided by considering three-dimensional random orientations for 11 ice crystal habits: droxtals, prolate spheroids, oblate spheroids, solid and hollow columns, compact aggregates composed of eight solid columns, hexagonal plates, small spatial aggregates composed of 5 plates, large spatial aggregates composed of 10 plates, and solid and hollow bullet rosettes. The maximum dimension of each habit ranges from 2 to 10 000 μm in 189 discrete sizes. For each ice crystal habit, three surface roughness conditions (i.e., smooth, moderately roughened, and severely roughened) are considered to account for the surface texture of large particles in the IGOM applicable domain. The data library contains the extinction efficiency, single-scattering albedo, asymmetry parameter, six independent nonzero elements of the phase matrix (P11, P12, P22, P33, P43, and P44), particle projected area, and particle volume to provide the basic single-scattering properties for remote sensing applications and radiative transfer simulations involving ice clouds. Furthermore, a comparison of satellite observations and theoretical simulations for the polarization characteristics of ice clouds demonstrates that ice cloud optical models assuming severely roughened ice crystals significantly outperform their counterparts assuming smooth ice crystals.

[1] Numerous studies indicate the need to account for particle non-sphericity in modeling the optical properties of dustlike aerosols. The methods for simulating the scattering of light by various non-spherical shapes have rapidly evolved over the last two decades. However, the majority of aerosol remote-sensing retrievals still rely on the Mie theory because retrievals accounting for particle non-sphericity are not as well defined methodologically and are demanding computationally. We propose a method for the retrieval of the optical properties of non-spherical aerosol based on the model of a shape mixture of randomly oriented polydisperse spheroids. This method is applied to angular and spectral radiation measurements from the Aerosol Robotic Network (AERONET) in locations influenced by desert dust. Comparisons with Mie-based retrievals show a significant improvement in dust-particle phase functions, size distributions, and refractive indices.

No abstract

The single-scattering properties of ice particles in the near- through far-infrared spectral region are computed from a composite method that is based on a combination of the finite-difference time-domain technique, the T-matrix method, an improved geometrical-optics method, and Lorenz-Mie theory. Seven nonspherical ice crystal habits (aggregates, hexagonal solid and hollow columns, hexagonal plates, bullet rosettes, spheroids, and droxtals) are considered. A database of the single-scattering properties for each of these ice particles has been developed at 49 wavelengths between 3 and 100 microm and for particle sizes ranging from 2 to 10,000 microm specified in terms of the particle maximum dimension. The spectral variations of the single-scattering properties are discussed, as well as their dependence on the particle maximum dimension and effective particle size. The comparisons show that the assumption of spherical ice particles in the near-IR through far-IR region is generally not optimal for radiative transfer computation. Furthermore, a parameterization of the bulk optical properties is developed for mid-latitude cirrus clouds based on a set of 21 particle size distributions obtained from various field campaigns.

The current cloud thermodynamic phase discrimination by Cloud-Aerosol Lidar Pathfinder Satellite Observations (CALIPSO) is based on the depolarization of backscattered light measured by its lidar [Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP)]. It assumes that backscattered light from ice crystals is depolarizing, whereas water clouds, being spherical, result in minimal depolarization. However, because of the relationship between the CALIOP field of view (FOV) and the large distance between the satellite and clouds and because of the frequent presence of oriented ice crystals, there is often a weak correlation between measured depolarization and phase, which thereby creates significant uncertainties in the current CALIOP phase retrieval. For water clouds, the CALIOP-measured depolarization can be large because of multiple scattering, whereas horizontally oriented ice particles depolarize only weakly and behave similarly to water clouds. Because of the nonunique depolarization–cloud phase relationship, more constraints are necessary to uniquely determine cloud phase. Based on theoretical and modeling studies, an improved cloud phase determination algorithm has been developed. Instead of depending primarily on layer-integrated depolarization ratios, this algorithm differentiates cloud phases by using the spatial correlation of layer-integrated attenuated backscatter and layer-integrated particulate depolarization ratio. This approach includes a two-step process: 1) use of a simple two-dimensional threshold method to provide a preliminary identification of ice clouds containing randomly oriented particles, ice clouds with horizontally oriented particles, and possible water clouds and 2) application of a spatial coherence analysis technique to separate water clouds from ice clouds containing horizontally oriented ice particles. Other information, such as temperature, color ratio, and vertical variation of depolarization ratio, is also considered. The algorithm works well for both the 0.3° and 3° off-nadir lidar pointing geometry. When the lidar is pointed at 0.3° off nadir, half of the opaque ice clouds and about one-third of all ice clouds have a significant lidar backscatter contribution from specular reflections from horizontally oriented particles. At 3° off nadir, the lidar backscatter signals for roughly 30% of opaque ice clouds and 20% of all observed ice clouds are contaminated by horizontally oriented crystals.

This study reports on the use of in situ data obtained in midlatitude and tropical ice clouds from airborne sampling probes and balloon-borne replicators as the basis for the development of bulk scattering models for use in satellite remote sensing applications. Airborne sampling instrumentation includes the twodimensional cloud (2D-C), two-dimensional precipitation (2D-P), high-volume precipitation spectrometer (HVPS), cloud particle imager (CPI), and NCAR video ice particle sampler (VIPS) probes. Herein the development of a comprehensive set of microphysical models based on in situ measurements of particle size distributions (PSDs) is discussed. Two parameters are developed and examined: ice water content (IWC) and median mass diameter D m . Comparisons are provided between the IWC and D m values derived from in situ measurements obtained during a series of field campaigns held in the midlatitude and tropical regions and those calculated from a set of modeled ice particles used for light-scattering calculations. The ice particle types considered in this study include droxtals, hexagonal plates, solid columns, hollow columns, aggregates, and 3D bullet rosettes. It is shown that no single habit accurately replicates the derived IWC and D m values, but a mixture of habits can significantly improve the comparison of these bulk microphysical properties. In addition, the relationship between D m and the effective particle size D eff , defined as 1.5 times the ratio of ice particle volume to projected area for a given PSD, is investigated. Based on these results, a subset of microphysical models is chosen as the basis for the development of ice cloud bulk scattering models in Part II of this study.