The main purpose of the HeLLo project is to contribute to data available on the literature on the real hygrothermal behavior of historic walls and the suitability of insulation technologies. Furthermore, it also aims at minimizing the energy simulation errors at the design phase and at improving their conservation features. In this framework, one of the preliminary activities of the study is the creation of a real in situ hot box to measure and analyze different insulation technologies applied to a real historic wall, to quantify the hygrothermal performance of a masonry building. Inside this box, ‘traditional’ experiments can be carried out: recording heat flux, surface temperature, and air temperatures, as well as relative humidity values through the use of a new sensing system (composed of thermocouples and temperature/relative humidity combined sensors). Within this paper, the process of development, construction, and validation of this new metering box is exhibited. The new hot box, specifically studied for historic case studies, when compared to other boxes, presents other advantages compared to previous examples, widely exemplified.

The hygrothermal behaviour of an internally insulated historic wall is still hard to predict, mainly because the physical characteristics of the materials composing the historic wall are unknown. In this study, the hygrothermal assessment of an internally thermal insulated masonry wall of an historic palace located in Ferrara, in Italy, is shown. In situ non-destructive monitoring method is combined with a hygrothermal simulation tool, aiming to better analyse and discuss future refurbishment scenarios. In this context, the original U-value of the wall (not refurbished) is decreased from 1.44 W/m2K to 0.26 W/m2K (10 cm stone wool). Under the site specific conditions of this wall, not reached by the sun or rain, it was verified that even in the absence of vapour barrier, no frost damage is likely to occur and the condensation risk is very limited. Authors proposed further discussion based on simulation. The results showed that the introduction of a second gypsum board to the studied technology compensated such absence, while the reduction of the insulation material thickness provides a reduction of RH peaks in the interstitial area by 1%; this second solution proved to be more efficient, providing a 3% RH reduction and the avoidance of further thermal losses.

No abstract

No abstract

There is a growing awareness that spending time in nature is associated with improvement of well-being; nevertheless, the prescription of forest bathing is still limited. The aim of this systematic review was to explore the physiological and psychological benefits of different forest therapies on healthy and pathological elderly populations (>60 years) to identify the most-effective type, duration, and frequency of these interventions. A search for literature was carried out in December 2021 using PubMed, EMBASE, ResearchGate, Google Scholar and Web of Science. Grey literature was searched as well. After removal of the duplicates, within the 214 articles identified, ten met the inclusion criteria. The methodological quality of the selected studies was rated. Forest walking, alone and in combination with other activities is the most effective intervention. The selected studies reported a positive impact on physical components, including reduction in blood pressure and heart rate and improvements in cardiopulmonary and neurochemical parameters. Favorable modifications have also been noted in the psychological field, with improvements in depression, stress levels and in quality of life perception. In conclusion, forest walking may play an important role in promoting physical and mental health in healthy and pathological elderly populations. However, the lack of high-quality studies limits the strength of the results, calling for more trials.