Abstract:The barrier resistance and wettability of papers are commonly controlled by the application of petroleum-based derivatives such as polyethylene, waxes and/or fluor-derivatives as coating. While surface hydrophobicity is improved by employing these polymers, they have become disfavored due to limitations in fossil-oil resources, poor recyclability, and environmental concerns on generated waste with lack of biodegradation. Alternatively, biopolymers including polysaccharides, proteins, lipids and polyesters can be used to formulate new pathways for fully bio-based paper coatings. However, difficulties in processing of most biopolymers may arise due to hydrophilicity, crystallization behavior, brittleness or melt instabilities that hinder a full exploitation at industrial scale. Therefore, blending with other biopolymers, plasticizers and compatibilizers is advantageous to improve the coating performance. In this paper, an overview of barrier properties and processing of bio-based polymers and their composites as paper coating will be discussed. In particular, recent technical advances in nanotechnological routes for bio-based nano-composite coatings will be summarized, including the use of biopolymer nanoparticles, or nanofillers such as nanoclay and nanocellulose. The combination of biopolymers along with surface modification of nanofillers can be used to create hierarchical structures that enhance hydrophobicity, complete barrier protection and functionalities of coated papers. OPEN ACCESSCoatings 2015, 5 888

No abstract

Traditional paper and papermaking have struggled with a declining market during the last few decades. However, the incorporation of nanotechnology into papermaking has brought possibilities to develop low-cost, biocompatible and flexible products with sophisticated functionalities. The functionality of nanopapers emerges from the intrinsic properties of the nanofibrous network, the additional loading of specific nanomaterials (NMs), or the additional deposition and patterning of thin films of nanomaterials on the paper surface. A successful development of functional nanopapers requires understanding how the nanopaper matrix, nanofillers, nanocoating pigments, nanoprinting inks, processing additives and manufacturing processes all interact to provide the intended functionality. This review addresses the emerging area of functional nanopapers. This review discusses flexible and multifunctional nanopapers, NMs being used in nanopaper making, manufacturing techniques, and functional applications that provide new important possibilities to utilize papermaking technology. The interface where NM research meets traditional papermaking has important implications for food packaging, energy harvesting and energy storage, flexible electronics, low-cost devices for medical diagnostics, and numerous other areas.

No abstract

No abstract

No abstract

A huge variety of plants are harvested worldwide and their different constituents can be converted into a broad range of bionanomaterials. In parallel, much research effort in materials science and...

Organic nanoparticles are synthesized by partial imidization of high-molecular weight styrene(maleic-anhydride) with 26 to 34 mol% maleic anhydride, in aqueous environment and presence of ammonium hydroxide. The nanoparticle dispersions have a maximum solid content of 35 wt% and good stability that critically depends on the ratio of imidized and ammonolyzed maleic anhydride moieties. The deprotonated residual maleic anhydride moieties provide dispersion stability at pH > 4, while protonation at pH < 4 causes nanoparticle sedimentation. After presentation of the synthesis conditions, the imidization reaction is characterized by FT-IR and Raman spectroscopy, followed by thermal analysis (TGA, DSC), and morphological characterization (DLS, SEM, TEM, AFM). The reaction conditions were optimized by physical characterization of various dispersions, and finally nanoparticles could be obtained with a maximum degree of imidization of 77% in dispersed conditions, or 90 to 95% after drying that are favorable for coating applications.