The application of organic electronic materials for the detection of ionizing radiations is very appealing thanks to their mechanical flexibility, low-cost and simple processing in comparison to their inorganic counterpart. In this work we investigate the direct X-ray photoconversion process in organic thin film photoconductors. The devices are realized by drop casting solution-processed bis-(triisopropylsilylethynyl)pentacene (TIPS-pentacene) onto flexible plastic substrates patterned with metal electrodes; they exhibit a strong sensitivity to X-rays despite the low X-ray photon absorption typical of low-Z organic materials. We propose a model, based on the accumulation of photogenerated charges and photoconductive gain, able to describe the magnitude as well as the dynamics of the X-ray-induced photocurrent. This finding allows us to fabricate and test a flexible 2 × 2 pixelated X-ray detector operating at 0.2 V, with gain and sensitivity up to 4.7 × 104 and 77,000 nC mGy−1 cm−3, respectively.

An organic ultralow voltage field effect transistor for DNA hybridization detection is presented. The transduction mechanism is based on a field-effect modulation due to the electrical charge of the oligonucleotides, so label-free detection can be performed. The device shows a sub-nanometer detection limit and unprecedented selectivity with respect to single nucleotide polymorphism.

Questo lavoro è stato selezionato per la pubblicazione nel volume del 16/10/2006 del Virtual Journal of Nanoscale Science & Technology, pubblicato dall’American Institute of Physics e dall’American Physical Societ

No abstract

No abstract

In this study, a novel approach to the fabrication of a multimodal temperature and force sensor on ultrathin, conformable and flexible substrates is presented. This process involves coupling a charge-modulated organic field-effect transistor (OCMFET) with a pyro/piezoelectric element, namely a commercial film of poly-vinylene difluoride (PVDF). The proposed device is able to respond to both pressure stimuli and temperature variations, demonstrating the feasibility of the approach for the development of low-cost, highly sensitive and conformable multimodal sensors. The overall thickness of the device is 1.2 μm, being thus able to conform to any surface (including the human body), while keeping its electrical performance. Furthermore, it is possible to discriminate between simultaneously applied temperature and pressure stimuli by coupling sensing surfaces made of poled and unpoled spin-coated PVDF-trifluoroethylene (PVDF-TrFE, a PVDF copolymer) with OCMFETs. This demonstrates the possibility of creating multimodal sensors that can be employed for applications in several fields, ranging from robotics to wearable electronics.

No abstract

The attention on the application of organic electronics for the detection of ionizing radiation is rapidly growing among the international scientific community, due to the great potential of the organic technology to enable large-area conformable sensor panels. However, high-energy photon absorption is challenging as organic materials are constituted of atoms with low atomic numbers.Here it is reported how, by synthesizing new solution-processable organic molecules derived from 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene) and 2,8-Difluoro-5,11bis(triethylsilylethynyl)anthradithiophene (diF-TES-ADT), with Ge-substitution in place of the Si atoms to increase the material atomic number, it is possible to boost the X-ray detection performance of organic thin films on flexible plastic substrates. TIPGe-pentacene based flexibleOTFTs show high electrical performance with higher mobility (0.4 cm 2 V -1 s -1 ) and enhanced X-ray sensitivity, up to 9.0 x 10 5 µC Gy -1 cm -3 , with respect to TIPS-pentacene based detectors. Moreover, similar results are obtained for diF-TEG-ADT devices, confirming that the proposed strategy, i.e.increasing the atomic number of organic molecules by chemical tailoring to improve X-ray sensitivity, can be generalized to organic thin film detectors, combining high X-ray absorption, mechanical flexibility and large area processing.