Capabilities in health monitoring via capture and quantitative chemical analysis of sweat could complement, or potentially obviate the need for, approaches based on sporadic assessment of blood samples. Established sweat monitoring technologies use simple fabric swatches and are limited to basic analysis in controlled laboratory or hospital settings. We present a collection of materials and device designs for soft, flexible and stretchable microfluidic systems, including embodiments that integrate wireless communication electronics, which can intimately and robustly bond to the surface of skin without chemical and mechanical irritation. This integration defines access points for a small set of sweat glands such that perspiration spontaneously initiates routing of sweat through a microfluidic network and set of reservoirs. Embedded chemical analyses respond in colorimetric fashion to markers such as chloride and hydronium ions, glucose and lactate. Wireless interfaces to digital image capture hardware serve as a means for quantitation. Human studies demonstrated the functionality of this microfluidic device during fitness cycling in a controlled environment and during long-distance bicycle racing in arid, outdoor conditions. The results include quantitative values for sweat rate, total sweat loss, pH and concentration of both chloride and lactate.

Recent research progress of relieving discomfort between electronics and human body involves serpentine designs, ultrathin films, and extraordinary properties of nanomaterials. However, these strategies addressed thus far each face own limitation for achieving desired form of electronic-skin applications. Evenly matched mechanical properties anywhere on the body and imperceptibility of electronics are two essentially required characteristics for future electronic-skin (E-skin) devices. Yet accomplishing these two main properties simultaneously is still very challenging. Hence, we propose a novel fabrication method to introduce kirigami approach to pattern a highly conductive and transparent electrode into diverse shapes of stretchable electronics with multivariable configurability for E-skin applications. These kirigami engineered patterns impart tunable elasticity to the electrodes, which can be designed to intentionally limit strain or grant ultrastretchability depending on applications over the range of 0 to over 400% tensile strain with strain-invariant electrical property and show excellent strain reversibility even after 10 000 cycles stretching while exhibiting high optical transparency (>80%). The versatility of this work is demonstrated by ultrastretchable transparent kirigami heater for personal thermal management and conformal transparent kirigami electrophysiology sensor for continuous health monitoring of human body conditions. Finally, by integrating E-skin sensors with quadrotor drones, we have successfully demonstrated human-machine-interface using our stretchable transparent kirigami electrodes.

Recent advances in electrodes for noninvasive recording of electroencephalograms expand opportunities collecting such data for diagnosis of neurological disorders and brain-computer interfaces. Existing technologies, however, cannot be used effectively in continuous, uninterrupted modes for more than a few days due to irritation and irreversible degradation in the electrical and mechanical properties of the skin interface. Here we introduce a soft, foldable collection of electrodes in open, fractal mesh geometries that can mount directly and chronically on the complex surface topology of the auricle and the mastoid, to provide highfidelity and long-term capture of electroencephalograms in ways that avoid any significant thermal, electrical, or mechanical loading of the skin. Experimental and computational studies establish the fundamental aspects of the bending and stretching mechanics that enable this type of intimate integration on the highly irregular and textured surfaces of the auricle. Cell level tests and thermal imaging studies establish the biocompatibility and wearability of such systems, with examples of high-quality measurements over periods of 2 wk with devices that remain mounted throughout daily activities including vigorous exercise, swimming, sleeping, and bathing. Demonstrations include a text speller with a steadystate visually evoked potential-based brain-computer interface and elicitation of an event-related potential (P300 wave).or more than 80 y, electroencephalography (EEG) has provided an effective noninvasive means to study human brain activity (1). EEG is instrumental in a wide range of clinical and research applications, from diagnosing epilepsy (2) to improving our understanding of language comprehension (3) and the development of brain-computer interfaces (BCI) (4). Conventional EEG recording systems, particularly the physical interface between the sensor (commonly known as an electrode) and the head, have limitations that constrain the more widespread use of EEG monitoring. Electrodes typically consist of rigid metal disks mechanically secured to the head with a mesh cap and chin strap, where electrolyte gels (5) enable efficient electrical coupling by reducing the impedance at the skin interface. This arrangement causes skin irritation (erythema) and leads to electrical degradation for periods of use that extend more than a few hours, typically caused by drying of the electrolyte gel (6). Recent technologies replace the gel (7, 8) with needles (8, 9), contact probes (10, 11), capacitive disks (12, 13), conductive composites (14, 15), or nanowires (16). Such dry electrodes have some promise, but they require multistep preparations, obtrusive wiring interfaces, and/or cumbersome mechanical fixtures. These shortcomings limit the potential for long-term use in diagnosis of neurological disabilities (17, 18) or in persistent BCI (17,19). For example, although microneedle electrodes can record EEG signals for a few hours (20), the interface does not offer the robustness, comfort, or eas...

Future electronics are expected to develop into wearable forms, and an adequate stretchability is required for the forthcoming wearable electronics considering various motions occurring in human body. Along with stretchability, transparency can increase both the functionality and esthetic features in future wearable electronics. In this study, we demonstrate, for the first time, a highly stretchable and transparent electromagnetic interference shielding layer for wearable electronic applications with silver nanowire percolation network on elastic poly(dimethylsiloxane) substrate. The proposed stretchable and transparent electromagnetic interference shielding layer shows a high electromagnetic wave shielding effectiveness even under a high tensile strain condition. It is expected for the silver nanowire percolation network-based electromagnetic interference shielding layer to be beyond the conventional electromagnetic interference shielding materials and to broaden its application range to various fields that require optical transparency or nonplanar surface environment, such as biological system, human skin, and wearable electronics.

Air quality has become a major public health issue in Asia including China, Korea, and India. Particulate matters are the major concern in air quality. We present the first environmental application demonstration of Ag nanowire percolation network for a novel, electrical type transparent, reusable, and active PM2.5 air filter although the Ag nanowire percolation network has been studied as a very promising transparent conductor in optoelectronics. Compared with previous particulate matter air filter study using relatively weaker short-range intermolecular force in polar polymeric nanofiber, Ag nanowire percolation network filters use stronger long-range electrostatic force to capture PM2.5, and they are highly efficient (>99.99%), transparent, working on an active mode, low power consumption, antibacterial, and reusable after simple washing. The proposed new particulate matter filter can be applied for a highly efficient, reusable, active and energy efficient filter for wearable electronics application.

To add more functionalities and overcome the limitation in conventional soft robots, highly anisotropic soft actuators with color shifting function during actuation is demonstrated for the first time. The electrothermally operating soft actuators with installed transparent metal nanowire percolation network heater allow easy programming of their actuation direction and instantaneous visualization of temperature changes through color change. Due to the unique direction dependent coefficient of thermal expansion mismatch, the suggested actuator demonstrates a highly anisotropic and reversible behavior with very large bending curvature (2.5 cm −1 ) at considerably low temperature (≈40 °C) compared to the previously reported electrothermal soft actuators. The mild operating heat condition required for the maximum curvature enables the superior long-term stability during more than 10 000 operating cycles. Also, the optical transparency of the polymer bilayer and metal nanowire percolation network heater allow the incorporation of the thermochromic pigments to fabricate color-shifting actuators. As a proof-of-concept, various color-shifting biomimetic soft robots such as color-shifting blooming flower, fluttering butterfly, and color-shifting twining tendril are demonstrated. The developed color-shifting anisotropic soft actuator is expected to open new application fields and functionalities overcoming the limitation of current soft robots.Unlike the conventional rigid actuators, the soft actuators are composed of elastic and lightweight materials with simple operating systems. [1] Due to their unique soft features, the soft actuators have been utilized in bioapplications such as artificial muscles, [2,3] soft manipulators, [4,5] biomimicking robots, [6][7][8][9] prosthesis, [10] and so on. The soft actuators operates by various physical, chemical, and optical stimulus such as electricity, [11][12][13][14][15] heat, [16][17][18] light, [7,8,19] magnetism, [20] pressure, [21] and humidity. [9,18,[22][23][24] Among them, considering the practical uses, the electrical signal has been the most popular input signal due to its easy and intuitive control of actuators. Typically the approaches to establish electrically operated soft actuators can be divided into two categories which are using electroactive polymeric (EAP) materials [4,5,12,15,25,26] and thermal expansive materials. [16][17][18]24,[27][28][29] However, since the EAP-based actuators need high operating voltage [4,5] and electrolyte environment, [12,25,26] their application in various fields is limited. On the other hand, the electrothermal actuator (ETA) which basically operates by different thermal expansive volume changes between the polymers composing a bilayer requires much lower operating voltage and Color-Changing Soft ActuatorsThe ORCID identification number(s) for the author(s) of this article can be found under https://doi.

State monitoring of the complex system needs a large number of sensors. Especially, studies in soft electronics aim to attain complete measurement of the body, mapping various stimulations like temperature, electrophysiological signals, and mechanical strains. However, conventional approach requires many sensor networks that cover the entire curvilinear surfaces of the target area. We introduce a new measuring system, a novel electronic skin integrated with a deep neural network that captures dynamic motions from a distance without creating a sensor network. The device detects minute deformations from the unique laser-induced crack structures. A single skin sensor decodes the complex motion of five finger motions in real-time, and the rapid situation learning (RSL) ensures stable operation regardless of its position on the wrist. The sensor is also capable of extracting gait motions from pelvis. This technology is expected to provide a turning point in health-monitoring, motion tracking, and soft robotics.

Power supply represents a critical challenge in the development of body-integrated electronic technologies. Although recent research establishes an impressive variety of options in energy storage (batteries and supercapacitors) and generation (triboelectric, piezoelectric, thermoelectric, and photovoltaic devices), the modest electrical performance and/or the absence of soft, biocompatible mechanical properties limit their practical use. The results presented here form the basis of soft, skin-compatible means for efficient photovoltaic generation and high-capacity storage of electrical power using dual-junction, compound semiconductor solar cells and chip-scale, rechargeable lithium-ion batteries, respectively. Miniaturized components, deformable interconnects, optimized array layouts, and dual-composition elastomer substrates, superstrates, and encapsulation layers represent key features. Systematic studies of the materials and mechanics identify optimized designs, including unusual configurations that exploit a folded, multilayer construct to improve the functional density without adversely affecting the soft, stretchable characteristics. System-level examples exploit such technologies in fully wireless sensors for precision skin thermography, with capabilities in continuous data logging and local processing, validated through demonstrations on volunteer subjects in various realistic scenarios.solid-state lithium-ion battery | multijunction solar cell | stretchable electronics | energy management | wearable technology R ecent ideas in materials science and mechanical engineering establish strategies for integrating functionality enabled by hard forms of electronics with compliant interconnects and soft packages to yield hybrid systems that offer low-modulus, elastic responses to large strain deformations (1-4). Such stretchable characteristics are qualitatively different from those afforded by simple mechanical bendability; the consequences are important because such properties allow for intimate, long-lived interfaces with the human body, such as the skin (5, 6), heart (7), and the brain (8), and for development of unusual device designs that derive inspiration from biology (9, 10). Many impressive examples of the utility of these concepts have emerged over the last several years, particularly in the area of biomedical devices, where work in skin-mounted technologies is now moving from laboratory demonstrations to devices with proven utility in human clinical studies (11, 12) and even to recently launched commercial products (13). Although schemes in high-frequency or ultrahigh-frequency wireless power transfer satisfy requirements in many important contexts (14, 15), opportunities remain for approaches in local generation and/or storage of power in ways that retain overall stretchable characteristics at the system level. Reported approaches to the former involve harvesting based on piezoelectric (16, 17), triboelectric (18), and thermoelectric (19) effects; the latter includes batteries (20-22) and supercapa...