There is a clinical need for a functional tissue-engineered blood vessel because small-caliber arterial graft (<5 mm) applications are limited by the availability of suitable autologous vessels and suboptimal performances of synthetic grafts. This study presents an analysis of the mechanical properties of tissue-engineered vascular constructs produced using a novel single-step self-assembly approach. Briefly, the tissue-engineered vascular media were produced by culturing smooth muscle cell in the presence of sodium l-ascorbate until the formation of a cohesive tissue sheet. This sheet was then rolled around a tubular support to create a media construct. Alternatively, the tissue-engineered vascular adventitia was produced by rolling a tissue sheet obtained from dermal fibroblasts or saphenous vein fibroblasts. The standard self-assembly approach to obtain the two-layer tissue-engineered vascular constructs comprising both media and adventitia constructs consists of two steps in which tissue-engineered vascular media were first rolled on a tubular support and a tissue-engineered vascular adventitia was then rolled on top of the first layer. This study reports an original alternative method for assembling tissue-engineered vascular constructs comprising both media and an adventitia in a single step by rolling a continuous tissue sheet containing both cell types contiguously. This tissue sheet was produced by growing smooth muscle cells alongside fibroblasts (saphenous vein fibroblasts or dermal fibroblasts) in the same culture dish separated by a spacer, which is removed later in the culture period. The mechanical strength assessed by uniaxial tensile testing, burst pressure measurements, and viscoelastic behavior evaluated by stepwise stress relaxation tests reveals that the new single-step fabrication method significantly improves the mechanical properties of tissue-engineered vascular construct for both ultimate tensile strength and all the viscoelastic moduli.

The aim of this study was to evaluate the possibility of constructing a fully autologous tissue-engineered tubular genitourinary graft (TTGG) and to determine its mechanical and physiological properties. Dermal fibroblasts (DFs) were expanded and cultured in vitro with sodium ascorbate to form fibroblast sheets. The sheets were then wrapped around a tubular support to form a cylinder. After maturation, urothelial cells (UCs) were seeded inside the DF tubes, and the constructs were placed in a bioreactor. The TTGGs were then characterized according to histology, immuno-histochemistry, Western blot, cell viability, resistance to suture, and burst pressure. Results obtained were encouraging on all levels. All layers of the TTGGs had merged, and a pluristratified urothelium coated the luminal surface of the tubes. The burst pressure of non-sutured TTGGs was measured and found to be, on average, three times as resistant as that of porcine urethras. Suturing was accomplished without difficulty. Results have shown that our construct can sustain an entire week of pulsatile stimulation without loss of mechanical or histological integrity. The tissue-engineering technique used to produce this model seems promising for bioengineering a urethra or ureter graft and could open a doorway to new possibilities for their reconstruction.

Skin is a major source of secretion of the neurotrophic factors nerve growth factor (NGF), brain-derived neurotrophic factor (BDNF), neurotrophin-3 (NT-3), and glial-derived neurotrophic factor (GDNF) controlling cutaneous sensory innervation. Beside their neuronal contribution, we hypothesized that neurotrophic factors also modulate the cutaneous microvascular network. First, we showed that NGF, BDNF, NT-3, and GDNF were all expressed in the epidermis, while only NGF and NT-3 were expressed by cultured fibroblasts, and BDNF by human endothelial cells. We demonstrated that these peptides are highly potent angiogenic factors using a human tissue-engineered angiogenesis model. A 40% to 80% increase in the number of capillary-like tubes was observed after the addition of 10 ng/mL of NGF, 0.1 ng/mL of BDNF, 15 ng/mL of NT-3, and 50 ng/mL of GDNF. This is the first characterization of the direct angiogenic effect of NT-3 and GDNF. This angiogenic effect was mediated directly through binding with the neurotrophic factor receptors tropomyosin-receptor kinase A (TrkA), TrkB, GFRa-1 and c-ret that were all expressed by human endothelial cells, while this effect was blocked by addition of the Trk inhibitor K252a. Thus, if NGF, BDNF, NT-3, and GDNF may only moderately regulate the microvascular network in normal skin, they might have the potential to greatly increase angiogenesis in pathological situations.

Bioreactors have been widely acknowledged as valuable tools to provide a growth environment for engineering tissues and to investigate the effect of physical forces on cells and cell-scaffold constructs. However, evaluation of the bioreactor environment during culture is critical to defining outcomes. In this study, the performance of a hydrostatic force bioreactor was examined by experimental measurements of changes in dissolved oxygen (O 2 ), carbon dioxide (CO 2 ), and pH after mechanical stimulation and the determination of physical forces (pressure and stress) in the bioreactor through mathematical modeling and numerical simulation. To determine the effect of hydrostatic pressure on bone formation, chick femur skeletal cell-seeded hydrogels were subjected to cyclic hydrostatic pressure at 0-270 kPa and 1 Hz for 1 h daily (5 days per week) over a period of 14 days. At the start of mechanical stimulation, dissolved O 2 and CO 2 in the medium increased and the pH of the medium decreased, but remained within human physiological ranges. Changes in physiological parameters (O 2 , CO 2 , and pH) were reversible when medium samples were placed in a standard cell culture incubator. In addition, computational modeling showed that the distribution and magnitude of physical forces depends on the shape and position of the cell-hydrogel constructs in the tissue culture format. Finally, hydrostatic pressure was seen to enhance mineralization of chick femur skeletal cell-seeded hydrogels.