tandard preservation of donor livers is performed by flushing the organ with a cold solution at the time of procurement, which is followed by static storage on ice. This approach reduces liver metabolic activity, allowing safe storage for up to 12-18 h (refs. 1,2). Recently, the combination of supercooling with subzero storage (−4 °C) and hypothermic, as well as subnormothermic, machine perfusion achieved an extension of the preservation time of human livers up to 27 h (ref. 2). By contrast, human livers can also be kept metabolically fully active for up to 24 h by supplying normothermic blood or oxygenated fluids in a controlled environment by machine perfusion 1,3-5. The possibility of repairing poor-quality livers sufficiently to enable transplantation requires preserving metabolically active livers 1,3 for several days. Accordingly, the need for long-term organ preservation technology has been endorsed by multiple private and governmental initiatives 1. However, currently used normothermic machine perfusion technologies have been used only for a relatively short time period (for example, a median perfusion time of 9 h (ref. 5)), to successfully maintain hemodynamics, perfusate oxygenation and temperature. We sought to extend perfusion time beyond 24 h by engineering a perfusion machine that recapitulates additional core body functions that are critical to liver health. We chose 7-d as a target because this time period has been shown to offer a credible time frame for inducing clinically relevant liver regeneration in patients undergoing complex liver resection 6-8. Under physiologic conditions, the liver, which constitutes 2.5% of body weight, receives 25% of the blood output of the heart and performs >5,000 functions 9. It has a unique dual vascular supply with high-pressure, oxygen-rich arterial blood entering through the hepatic artery and low-pressure, oxygen-reduced portal vein blood draining the abdominal viscera. Its high metabolic activity produces waste products that are excreted in the bile or removed by hepatic macrophages or the kidneys. The metabolic profile is largely controlled by pancreatic hormones, including insulin and glucagon. Our perfusion technology, developed in the "Liver4Life project", includes automated control of glucose levels by injection of insulin and glucagon, a dialysis membrane for waste-product removal, regulation of oxygenation and liver movement to prevent pressure necrosis. Results Liver perfusion machine. Our perfusion machine (Fig. 1a,b) recapitulates blood supply through the two vascular entries of the liver, the hepatic artery and portal vein. The hepatic artery is supplied with oxygen-rich blood at elevated pressure (mean arterial pressure (MAP) ≥ 65 mmHg) in a pulsatile manner (Fig. 1c), whereas the portal vein receives blood at low pressure (around 5-10 mmHg) with a reduced oxygen content (venous blood, non-pulsatile). The system maintains oxygen saturation of 65% in the vena cava by continuously adjusting oxygen content in the portal vein (Fig. 1d). In vivo, nutr...

A novel approach has been developed in order to use Kraft lignin as a renewable resource for the production of chemicals. The concept is based on the use of polyoxometalates as reversible oxidants and on the use of radical scavengers, which prevent lignin fragments from repolymerizing. The oxidation of Kraft lignin, which is a potential source of functionalized phenols, by H3PMo12O40 in water yields a relatively small amount of monomeric species detected by GC-MS. The addition of methanol to the reaction resulted in an increase in the yield of monomeric products by a factor of up to 15. Vanillin and methyl vanillate are the main products obtained, in a maximum yield of 5 wt % based on dry Kraft lignin. Methanol plays a decisive role in the prevention of repolymerization by reducing lignin-lignin condensation reactions. Furthermore, it is proposed that methanol generates small amounts of .CH3 and CH3O. radicals through the acid-catalyzed formation of dimethyl ether which couple with lignin fragments.

An autohydrolysis pretreatment that suppresses lignin repolymerisation helps overcoming the recalcitrance of softwood for enzymatic hydrolysis of its cellulose.

No abstract

No abstract

No abstract

Enhancing the thermal efficiency of a broad range of condenser devices requires means of achieving sustainable dropwise condensation on metallic surfaces, where heat transfer can be further enhanced, by harvesting the advantage of the sweeping action of vapor flow over the surface, facilitating a reduction in the droplet departure diameter. Here, we present a rationally driven, hierarchical texturing process of copper surfaces, guided by fundamental principles of wettability and coalescence, which achieves controlled droplet departure under vapor flow conditions and thus significantly enhances phase change thermal transport. The desired texture is attained by fabricating an array of 3D laser-structured truncated microcones on the surface, covered with papillae-like nanostructures and a hydrolytically stable, low surface energy self-assembled-monolayer coating. Passive droplet departure on this surface is achieved through progressive coalescence of droplets arising from microcavities formed by the microcone array, resulting in depinning and subsequent departure of the depinned condensate drops through vapor shear. The synergistic combination of vapor shear and the sustained dropwise condensation on the hierarchical copper surface results in a nearly 700% increase in heat transfer coefficients as compared to filmwise condensation from identical, standard unstructured surfaces.

No abstract