The seismic activity in the western part of the Corinth Rift (Greece) over the period 2000-2007, monitored by a dense network of three-component stations, is analysed in terms of multiplets and high precision relocation using double difference techniques. This detailed analysis provides new insights into the geometry of faults at depth, the nature and the structure of the active zone at 6-8 km depth previously interpreted as a possible detachment, and more generally into the rifting process. The seismicity exhibits a complex structure, strongly varying along the rift axis. The detailed picture of the seismic zone below the rift indicates that its shallower part (at depths of 6-8 km) is 1-1.5 km thick with a complex microstructure, and that its deeper part (at depths of 9-12 km) gently dipping to the north (10-20 • ) is 0.1-0.3 km thick with a microstructure consistent with the general slope of the structure. Although the nature of this seismic zone remains an open question, the presence of seismicity beneath the main active area, the strong variability of the structure along the rift over short distances and the complex microstructure of the shallower part revealed by the multiplet analysis are arguments against the hypothesis of a mature detachment under the rift: this active zone more likely represents a layer of diffuse deformation. The geometry of the mapped active faults is not well defined at depth, as no seismicity is observed between 0 and 4 km, except for the Aigion Fault rooting in the seismic layer at 6 km depth with a dip of 60 • . A distinct cloud of seismicity may be associated with the antithetic Kalithea Fault, on which the 1909 Fokis earthquake (M s = 6.3) may have occurred. The link between the 1995 rupture (M s = 6.2) and the faults known at the surface has been better constrained, as the relocated seismicity favours a rupture on an offshore, blind fault dipping at 30 • , rather than on the deeper part of the East Helike Fault. Consequently, the 1995 event is expected to have decreased the Coulomb stress on the East Helike Fault. To explain these seismic observations along with the geodetic observations, a new mechanical model for the rifting process in this region is proposed, involving non-elastic, mostly aseismic uniform NS opening below the rift axis, coupled with the downward and northward growth of a yet immature detachment: the reported GPS rates would mainly result from this deep, silent source, and the seismicity would reveal the detachment position, not yet connected to the ductile lower crust. In such a model, the strong fluctuations of microseismicity would result from small strain instabilities, undetected by continuous GPS and possibly related to pore pressure transients.

We develop and test a new hybrid approach of the amplitude and waveform moment tensor inversions, which utilizes the principal component analysis of seismograms. The proposed inversion is less sensitive to noise in data, being thus more accurate and more robust than the amplitude inversion. It also suppresses other unmodeled phenomena, like a directivity of the source, errors caused by local site effects at individual stations, and by time shifts in arrivals of observed and synthetic signals due to an inaccurate velocity model. This inversion is computationally less demanding than the full waveform inversion and thus applicable to large sets of earthquakes. The approach is numerically tested on synthetic data with various levels of noise. The applicability of the inversion is demonstrated on inverting more than 800 microearthquakes that occurred during the 2014 activity in West Bohemia, Czech Republic. The analysis revealed several distinct clusters of moment tensors. Focal mechanisms corresponding to moment tensors of three clusters are left-lateral strike slips associated with the most active fault in the focal zone. Another cluster is characterized by right-lateral strike slips associated with the fault conjugate to the main fault. Finally, we identified a cluster with pure reverse focal mechanisms that are anomalous and not expected to occur in the region. These mechanisms were not detected in previous seismic activity, and they have an unfavorable orientation with respect to regional tectonic stress. This might indicate a presence of local stress heterogeneities caused, for example, by an interaction of faults or fault segments in the focal zone.

Full moment tensors of 1,421 microearthquakes in The Geysers geothermal field were calculated using waveform data from a field‐wide broadband network and the approach based on the principal component analysis. Spatial characteristics of faulting regime, stress tensor and the isotropic component (ISO) of moment tensors were investigated. The studied events form different clusters dominated by normal faults (NF) and strike‐slip (SS) faults, respectively. The SS‐dominated clusters are related to the SS stress state observed in the southwestern side of the field where two NW‐SE trending fault zones exist. Increasing proportions of SS faults were observed near the shallow and deep parts of the NF‐dominated clusters. Temperature differences between the upper and lower parts of the reservoir do not change the overall stress states of clusters. The stress ratios in the NW part are much smaller than in the SE part of the field. The retrieved ISOs range between −5% and 25% for 96% of events. The average percentages of positive ISOs are correlated with the average injection rates in different clusters, and keep an increasing trend with depth below the main injection interval. Only 10% of events show negative ISO and are mainly constrained within the depth range of steam extraction. The proportion of events with negative ISO suggests much weaker seismic responses of the steam extraction than the water injection. The spatial variations of the ISO percentage do not follow the seismicity variations as the ISO is more sensitive to the pressure changes related to the fluid injection and migration.

Observations of the 2008–2014 seismic activity in West Bohemia, Czech Republic, provide evidence of interaction of compressive fault steps that created local stress anomaly and triggered a seismic sequence with exceptional properties. The West Bohemia is a geothermal area, characterized by persistent fluid‐driven seismicity in the form of earthquake swarms. The focal zone is formed by two weak and fluid‐eroded parallel strike‐slip faults with a step of about 200 m. The fault segments were activated successively by the 2008 and 2011 swarms with magnitudes of the strongest events of 3.8 and 3.7, respectively. In 2014, a fracture linking both segments was formed or activated by a mainshock‐aftershock sequence. The aftershock decay was very fast, and the focal mechanism of the strongest event with magnitude of 4.2 was inconsistent with the regional background stress. The stress inversion of 957 focal mechanisms revealed a stress anomaly characterized by interchanging the σ2 and σ3 principal stress axes in the area of fault interaction. The modeling of the Coulomb stress change confirmed that the stress anomaly could completely disturb the regional background stress and produce the rotation of the principal stress axes retrieved from focal mechanisms. The faults activated or newly formed within the compressive stress anomaly were of high strength, which caused the anomalous mainshock‐aftershock character of the 2014 activity and the rapid aftershock decay. Linking the two previously active isolated faults during the 2014 activity increased the expected moment magnitude Mw of a possible strongest earthquake from 5.0 to 5.4.