Introduction The efficiency of front kick is related to the kicking technique. Thus, the aim of this study was to find the kinematic determinants of front kick dynamics across different performance and loading levels (no load to 45-kg load). Materials and Methods Twenty-four elite and sub-elite professional military personnel (26.8 ± 10.1 years, 84.2 ± 5.4 kg, 181.1 ± 6.4 cm) performed six front kicks into a force plate across five different loading conditions. Three-dimensional kinematics of the kicks was quantified and included velocity of the hip (Vhip), velocity of the knee (Vknee), velocity of the shoulder (Vshoulder), velocity of the foot (Vfoot), angular velocity of the knee (AVknee), and angular velocity of the hip (AVhip). Results The main kinematic differences between the two groups were that the sub-elite group had an increased kick time for all loading conditions (P < .001) and a lower Vfoot (P = .05) and a decreased Vhip and Vshoulder (P < .05) in the highest load condition. Vhip and AVhip were the best predictors (up to R2 = 0.58; P = .020) of peak force and impact force during no-load or loaded kicking at the elite level. Typical predictors of impulse in the elite group were AVhip, Vhip, and Vshoulder and those in the sub-elite group were AVknee and Vfoot. Conclusions The kinematic variables provide good predictions of kicking dynamics; however, the best predictor varies with the loading conditions and performance levels. Hip motion is the main differentiating factor.

This article describes the method of using human body models developed originally for the use in automotive safety in forensic reconstructions of falls from height. The MADYMO(®) software package and multibody human body models were used in forensic analyses of two real cases--a fatal fall from a window c. 13.8 m above the ground and a fall into a c. 2.5-m deep cellar pit resulting in isolated ankle joint injury. The performed series of numerical simulations helped to reconstruct the events and to resolve legally relevant questions concerning various aspects of the falls. The benefits as well as limitations and potential biases associated with the use of numerical simulation in forensic biomechanical settings are discussed. The method has proven to be effective under specific circumstances, though the cost (both financial and temporal) still prevents it from wider use.

Achieving the maximum possible impact force of the front kick can be related to the isokinetic lower limb muscle strength. Therefore, we aimed to determine the regression model between kicking performance and the isokinetic peak net moment of hip rotators, flexors, and hip extensors and flexors at various speeds of contraction. Twenty-five male soldiers (27.7 ± 7.2 yrs, 83.8 ± 6.1 kg, 180.5 ± 6.5 cm) performed six barefoot front kicks, where impact forces (N) and kick velocity (m∙s-1) were measured. The 3D kinematics and isokinetic dynamometry were used to estimate the kick velocity, isokinetic moment of kicking lower limb hip flexors and extensors (60, 120, 240, 300°∙s-1), and stance lower limb hip internal and external rotators (30, 90°∙s-1). Multiple regression showed that a separate component of the peak moment concentric hip flexion and extension of the kicking lower limb at 90°∙s-1 can explain 54% of the peak kicking impact force variance (R2 = 0.54; p < 0.001). When adding the other 3 components of eccentric and concentric hip internal and external rotations at 30°∙s-1, the internal and external hip rotation ratios at 30°∙s-1 on the stance limb and the concentric ratio of kicking limb flexion and extension at 300°∙s-1 that explained the variance of impact force were 75% (p = 0.003). The explosive strength of kicking limb hip flexors and extensors is the main condition constraint for kicking performance. The maximum strength of stance limb internal and external rotators and speed strength of kicking limb hip flexors and extensors are important constraints of kicking performance that should be considered to improve the front kick efficiency.

No abstract

Osteoarthritis (OA) can be used as a common name for a group of overlapping pathological conditions when the balance between the processes of degradation and synthesis, in individual parts of the cartilage, is disturbed and leads to gradual cartilage destruction. A preventive approach toward OA helps with a timely diagnosis and subsequent treatment of this disease. One of the significant risk factors affecting development of hip joint OA is the mechanism and magnitude of mechanical loading on the joint. The main motivation for this work was to verify the hypothesis involving a pathologic cycle (overloading - change of locomotion - overloading) as contributory to the development of OA and whether it can be stopped, or at least partly decelerated, by a suitable change of movement stereotypes. Providing that there is a natural balance of muscular action, from the beginning of OA, the development of OA can be significantly decelerated. The return to a natural force balance can be achieved using suitable exercise and strengthening of muscular structures. In order to verify the hypothesis, we undertook experimental measurements of gait kinematics and a computational analysis of the hip joint using the Finite Element Method.

Front kicks are often used in combat activities that involve the use of kicks and punches, including close combat military training. To mimic real-life combative environments where soldiers execute forceful front kicks while wearing military boots, it is logical to wear these boots during close combat training. However, the effect of military footwear on front kick forces remain unknown. Therefore, the aim of this study was to compare the effects of military boots on front kick dynamics. Six male soldiers (23.3 ± 1.7 yr, 74.3 ± 6.2 kg, 175.5 ± 4.5 cm) performed eight individual front kicks with no military boots, in bare feet (NB) and with military boots (MB). Peak force (N), impulse (N.s) and time to reach peak force (ms), were measured during each kick. Data were analyzed using paired sample t-tests or nonparametric Wilcoxon pair test and Cohen's d. Results. Neither peak force (3180 ± 647 N) nor impulse (367 ± 40 N.s) of MB were different than NB (3157 ± 291 N and 360 ± 48 N.s, respectively) (p = 0.85; d = 0.04 and p = 0.36; d = 0.12, respectively). Peak force was reached in a significantly shorter time during MB (39 ± 16 ms) compared to NB (56 ± 8 ms; d = −0.88). Conclusion. Peak force was reached in a shorter time using MB compared to barefoot (NB) front kicks. The use of military boots changes the time course of peak force during the front kick.

Contemporary descriptions of motor control suggest that variability in movement can be indicative of skilled or unskilled performance. Here we used principal component analysis to study the kicking performance of elite and sub-elite soldiers who were highly familiar with the skill in order to compare the variability in the first and second principal components. The subjects kicked a force plate under a range of loaded conditions, and their movement was recorded using optical motion capture. The first principal component explained >92% of the variability across all kinematic variables when analyzed separately for each condition, and both groups and explained more of the variation in the movement of the elite group. There was more variation in the loading coefficient of the first principal component for the sub-elite group. In contrast, for the second principal component, there was more variation in the loading coefficient for the elite group, and the relative magnitude of the variation was greater than for the first principal component for both groups. These results suggest that the first principal component represented the most fundamental movement pattern, and there was less variation in this mode for the elite group. In addition, more of the variability was explained by the hip than the knee angle entered when both variables were entered into the same PCA, which suggests that the movement is driven by the hip.

No abstract