We demonstrate a compact diode-pumped Yb:KGW femtosecond oscillator-Yb:YAG Innoslab amplifier master oscillator power amplifier (MOPA) with nearly transform-limited 636 fs pulses at 620 W average output power, 20 MHz repetition rate, and beam quality of M(x)(2) = 1.43 and M(y)(2) = 1.35. By cascading two amplifiers, we attain an average output power of 1.1 kW, a peak power of 80 MW, and a 615 fs pulse width in a single linearly polarized beam. The power-scalable MOPA is operated at room temperature, and no chirped-pulse amplification technique is used.
We demonstrate a scheme for nonlinear pulse compression at high average powers based on self-phase modulation in a multi-pass cell using fused silica as the nonlinear medium. The scheme is suitable for compression of pulses with peak powers exceeding the threshold for critical self-focusing. At >400 W of input power, the pulses of a Yb:YAG-Innoslab laser system (10 MHz repetition rate, 850 fs pulse duration) are spectrally broadened from 1.6 to >13.5 nm bandwidth while maintaining almost diffraction-limited beam quality. The chirp is removed with a dispersive mirror compressor, and pulse durations of 170 fs at an output power of 375 W are achieved. The compression unit reaches an overall transmission of >90%.
The Innoslab design, already established for neodymium doped laser crystals, was applied to ytterbium doped laser materials. Recent progresses in brightness of high power diode lasers facilitate efficient pumping of quasi-three-level laser materials. Innoslab amplifiers are compared to competing thin-disk and fiber fs-amplifiers. A compact diode-pumped Yb:YAG Innoslab fs-oscillator-amplifier system, scalable to the kilowatt range, was realized. Numerical simulations result in conditions for high efficiency and beam quality. Nearly transform and diffraction limited 680 fs pulses at 400 W average output power and 76 MHz repetition rate without using CPA technology have been achieved at room temperature so far.
The Innoslab amplifier comprises a diode-laser partially end-pumped thin slab crystal and a folded single-pass optical amplification path. While this configuration differs in many respects from other slab amplifiers, it shares characteristics with partially end-pumped rod amplifiers. It combines outstanding thermal management, efficiency, and beam quality in the 100 W to 1 kW power range. In this paper, we review amplifiers for a wide range of operation regimes and laser materials.
We report on single-pass high-harmonic generation (HHG) with amplified driving laser pulses at a repetition rate of 20.8 MHz. An Yb:YAG Innoslab amplifier system provides 35 fs pulses with 20 W average power at 1030 nm after external pulse compression. Following tight focusing into a xenon gas jet, we observe the generation of high-harmonic radiation of up to the seventeenth order. Our results show that state-of-the-art amplifier systems have become a promising alternative to cavity-assisted HHG for applications that require high repetition rates, such as frequency comb spectroscopy in the extreme UV.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.