Recycled plastics are low-value commodities due to residual impurities and the degradation of polymer properties with each cycle of re-use. Plastics that undergo reversible polymerization allow high-value monomers to be recovered and re-manufactured into pristine materials, which should incentivize recycling in closedloop life cycles. However, monomer recovery is often costly, incompatible with complex mixtures, and energy-intensive. Here, we show that next-generation plastics-polymerized using dynamic covalent diketoenamine bonds-enable recovery of monomers from common additives, even in mixed waste streams. Poly(diketoenamine)s "click" together from a wide variety of triketones and aromatic or aliphatic amines, yielding only water as a byproduct. Recovered monomers can be re-manufactured into the same polymer formulation, without loss of performance, as well as other polymer formulations with differentiated properties. The ease in which poly(diketoenamine)s can be manufactured, used, recycled, and re-used-without losing value-points to new directions in designing sustainable polymers with minimal environmental impact. Closed-Loop polymer life cycles are critical to sustainability efforts worldwide. 1-7 Their integration into the global materials ecosystem hinges on maintaining high value in recovered materials at the end of a product's life.

Control of equilibrium and non‐equilibrium thermomechanical behavior of poly(diketoenamine) vitrimers is shown by incorporating linear polymer segments varying in molecular weight (MW) and conformational degrees of freedom into the dynamic covalent network. While increasing MW of linear segments yields a lower storage modulus at the rubbery plateau after softening above the glass transition (Tg), both Tg and the characteristic time of stress relaxation are independently governed by the conformational entropy of the embodied linear segments. Activation energies for bond exchange in the solid state are lower for networks incorporating flexible chains; the network topology freezing temperature decreases with increasing MW of flexible linear segments but increases with increasing MW of stiff segments. Vitrimer reconfigurability is therefore influenced not only by the energetics of bond exchange for a given network density, but also the entropy of polymer chains within the network.

Mechanical recycling of polymers downgrades them such that they are unusable after a few cycles. Alternatively, chemical recycling to monomer offers a means to recover the embodied chemical feedstocks for remanufacturing. However, only a limited number of commodity polymers may be chemically recycled, and the processes remain resource intensive. We use systems analysis to quantify the costs and life-cycle carbon footprints of virgin and chemically recycled polydiketoenamines (PDKs), next-generation polymers that depolymerize under ambient conditions in strong acid. The cost of producing virgin PDK resin using unoptimized processes is ~30-fold higher than recycling them, and the cost of recycled PDK resin ($1.5 kg−1) is on par with PET and HDPE, and below that of polyurethanes. Virgin resin production is carbon intensive (86 kg CO2e kg−1), while chemical recycling emits only 2 kg CO2e kg−1. This cost and emissions disparity provides a strong incentive to recover and recycle future polymer waste.

A general approach to enhancing the emission quantum yield of several widely studied organic chromophores is presented. The luminescence properties of a series of symmetrical sulfur-bridged chromophores are reported as a function of the oxidation state of the bridging sulfur atom. The photoluminescence quantum yield is significantly enhanced by successively oxidizing the sulfur bridge from sulfide (S), to sulfoxide (SO), to sulfone (SO2).

Symmetric dimers have the potential to optimize energy transfer and charge separation in optoelectronic devices. In this paper, a combination of optical spectroscopy (steady-state and time-resolved) and electronic structure theory is used to analyze the photophysics of sulfur-bridged terthiophene dimers. This class of dimers has the unique feature that the interchromophore (intradimer) electronic coupling can be modified by varying the oxidation state of the bridging sulfur from sulfide (S), to sulfoxide (SO), to sulfone (SO2). Photoexcitation leads to the formation of a delocalized charge resonance state (S1) that relaxes quickly (<10 ps) to a charge-transfer state (S1*). The amount of charge-transfer character in S1* can be enhanced by increasing the oxidation state of the bridging sulfur group as well as the solvent polarity. The S1* state has a decreased intersystem crossing rate when compared to monomeric terthiophene, leading to an enhanced photoluminescence quantum yield. Computational results indicate that electrostatic screening by the bridging sulfur electrons is the key parameter that controls the amount of charge-transfer character. Control of the sulfur bridge oxidation state provides the ability to tune interchromophore interactions in covalent assemblies without altering the molecular geometry or solvent polarity. This capability provides a new strategy for the design of functional supermolecules with applications in organic electronics.

A new concept for difficult-to-replicate security inks for use in advanced anti-counterfeiting applications is presented.

Footwear, carpet, automotive interiors, and multilayer packaging are examples of products manufactured from several types of polymers whose inextricability poses substantial challenges for recycling at the end of life. Here, we show that chemical circularity in mixed-polymer recycling becomes possible by controlling the rates of depolymerization of polydiketoenamines (PDK) over several orders of magnitude through molecular engineering. Stepwise deconstruction of mixed-PDK composites, laminates, and assemblies is chemospecific, allowing a prescribed subset of monomers, fillers, and additives to be recovered under pristine condition at each stage of the recycling process. We provide a theoretical framework to understand PDK depolymerization via acid-catalyzed hydrolysis and experimentally validate trends predicted for the rate-limiting step. The control achieved by PDK resins in managing chemical and material entropy points to wide-ranging opportunities for pairing circular design with sustainable manufacturing.

What's up sulfur? The photochemical reactivity, including a mechanistic study of sulfur-bridged anthracenes is reported. The oxidation state of the bridging sulfur (SOn ) dictates the excited-state behavior of these molecules.