New research directions will lead to fundamental changes in the design of future 5th generation (5G) cellular networks. This paper describes five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter Wave, Massive-MIMO, smarter devices, and native support to machine-2-machine. The key ideas for each technology are described, along with their potential impact on 5G and the research challenges that remain.

Abstract-Most of the recent advances in the design of highspeed wireless systems are based on information-theoretic principles that demonstrate how to efficiently transmit long data packets. However, the upcoming wireless systems, notably the 5G system, will need to support novel traffic types that use short packets. For example, short packets represent the most common form of traffic generated by sensors and other devices involved in Machine-toMachine (M2M) communications. Furthermore, there are emerging applications in which small packets are expected to carry critical information that should be received with low latency and ultrahigh reliability.Current wireless systems are not designed to support shortpacket transmissions. For example, the design of current systems relies on the assumption that the metadata (control information) is of negligible size compared to the actual information payload. Hence, transmitting metadata using heuristic methods does not affect the overall system performance. However, when the packets are short, metadata may be of the same size as the payload, and the conventional methods to transmit it may be highly suboptimal.In this article, we review recent advances in information theory, which provide the theoretical principles that govern the transmission of short packets. We then apply these principles to three exemplary scenarios (the two-way channel, the downlink broadcast channel, and the uplink random access channel), thereby illustrating how the transmission of control information can be optimized when the packets are short. The insights brought by these examples suggest that new principles are needed for the design of wireless protocols supporting short packets. These principles will have a direct impact on the system design.

The grand objective of 5G wireless technology is to support three generic services with vastly heterogeneous requirements: enhanced mobile broadband (eMBB), massive machine-type communications (mMTC), and ultra-reliable low-latency communications (URLLC). Service heterogeneity can be accommodated by network slicing, through which each service is allocated resources to provide performance guarantees and isolation from the other services. Slicing of the Radio Access Network (RAN) is typically done by means of orthogonal resource allocation among the services. This work studies the potential advantages of allowing for non-orthogonal sharing of RAN resources in uplink communications from a set of eMBB, mMTC and URLLC devices to a common base station. The approach is referred to as Heterogeneous Non-Orthogonal Multiple Access (H-NOMA), in contrast to the conventional NOMA techniques that involve users with homogeneous requirements and hence can be investigated through a standard multiple access channel. The study devises a communication-theoretic model that accounts for the heterogeneous requirements and characteristics of the three services. The concept of reliability diversity is introduced as a design principle that leverages the different reliability requirements across the services in order to ensure performance guarantees with non-orthogonal RAN slicing. This study reveals that H-NOMA can lead, in some regimes, to significant gains in terms of performance trade-offs among the three generic services as compared to orthogonal slicing.

The Harvard community has made this article openly available. Please share how this access benefits you. Your story matters Abstract-We investigate modulation schemes optimized for two-way wireless relaying systems, for which network coding is employed at the physical layer. We consider network coding based on denoise-and-forward (DNF) protocol, which consists of two stages: multiple access (MA) stage, where two terminals transmit simultaneously towards a relay, and broadcast (BC) stage, where the relay transmits towards the both terminals. We introduce a design principle of modulation and network coding, considering the superposed constellations during the MA stage. For the case of QPSK modulations at the MA stage, we show that QPSK constellations with an exclusive-or (XOR) network coding do not always offer the best transmission for the BC stage, and that there are several channel conditions in which unconventional 5-ary constellations lead to a better throughput performance. Through the use of sphere packing, we optimize the constellation for such an irregular network coding. We further discuss the design issue of the modulation in the case when the relay exploits diversity receptions such as multiple-antenna diversity and path diversity in frequency-selective fading. In addition, we apply our design strategy to a relaying system using higher-level modulations of 16QAM in the MA stage. Performance evaluations confirm that the proposed scheme can significantly improve end-to-end throughput for two-way relaying systems.

It has recently been recognized that the wireless networks represent a fertile ground for devising communication modes based on network coding. A particularly suitable application of the network coding arises for the two-way relay channels, where two nodes communicate with each other assisted by using a third, relay node. Such a scenario enables application of physical network coding, where the network coding is either done (a) jointly with the channel coding or (b) through physical combining of the communication flows over the multiple access channel. In this paper we first group the existing schemes for physical network coding into two generic schemes, termed 3-step and 2-step scheme, respectively. We investigate the conditions for maximization of the two-way rate for each individual scheme: (1) the Decode-and-Forward (DF) 3-step schemes (2) three different schemes with two steps: Amplify-and-Forward (AF), JDF and Denoise-and-Forward (DNF). While the DNF scheme has a potential to offer the best two-way rate, the most interesting result of the paper is that, for some SNR configurations of the source-relay links, JDF yields identical maximal two-way rate as the upper bound on the rate for DNF.

Machine-type communications (MTC) are expected to play an essential role within future 5G systems. In the FP7 project METIS, MTC has been further classified into "massive Machine-Type Communication" (mMTC) and "ultra-reliable Machine-Type Communication" (uMTC). While mMTC is about wireless connectivity to tens of billions of machine-type terminals, uMTC is about availability, low latency, and high reliability. The main challenge in mMTC is scalable and efficient connectivity for a massive number of devices sending very short packets, which is not done adequately in cellular systems designed for human-type communications. Furthermore, mMTC solutions need to enable wide area coverage and deep indoor penetration while having low cost and being energy efficient. In this article, we introduce the physical (PHY) and medium access control (MAC) layer solutions developed within METIS to address this challenge.

The next wave of wireless technologies will proliferate in connecting sensors, machines, and robots for myriad new applications, thereby creating the fabric for the Internet of Things (IoT). A generic scenario for IoT connectivity involves a massive number of machine-type connections. But in a typical application, only a small (unknown) subset of devices are active at any given instant, thus one of the key challenges for providing massive IoT connectivity is to detect the active devices first and then to decode their data with low latency. This article advocates the usage of grant-free, rather than grant-based, random access scheme for the problem of massive IoT access and outlines several key signal processing techniques that promote the performance of the considered grant-free strategy, focusing primarily on advanced compressed sensing technique and its application for efficient detection of the active devices.We show that massive multiple-input multiple-output (MIMO) is especially well-suited for massive IoT connectivity in the sense that the device detection error can be driven to zero asymptotically in the limit as the number of antennas at the base station goes to infinity by using the multiple-measurement vector (MMV) compressed sensing techniques. The paper also provides a perspective on several related important techniques for massive access, such as embedding of short messages onto the device activity detection process and the coded random access.

Abstract-The millimeter wave (mmWave) frequency band is seen as a key enabler of multi-gigabit wireless access in future cellular networks. In order to overcome the propagation challenges, mmWave systems use a large number of antenna elements both at the base station and at the user equipment, which lead to high directivity gains, fully-directional communications, and possible noise-limited operations. The fundamental differences between mmWave networks and traditional ones challenge the classical design constraints, objectives, and available degrees of freedom. This paper addresses the implications that highly directional communication has on the design of an efficient medium access control (MAC) layer. The paper discusses key MAC layer issues, such as synchronization, random access, handover, channelization, interference management, scheduling, and association. The paper provides an integrated view on MAC layer issues for cellular networks, identifies new challenges and tradeoffs, and provides novel insights and solution approaches.