Even though the sense of touch is crucial for humans, most humanoid robots lack tactile sensing. While a large number of sensing technologies exist, it is not trivial to incorporate them into a robot. We have developed a compliant “skin” for humanoids that integrates a distributed pressure sensor based on capacitive technology. The skin is modular and can be deployed on nonflat surfaces. Each module scans locally a limited number of tactile-sensing elements and sends the data through a serial bus. This is a critical advantage as it reduces the number of wires. The resulting system is compact and has been successfully integrated into three different humanoid robots. We have performed tests that show that the sensor has favorable characteristics and implemented algorithms to compensate the hysteresis and drift of the sensor. Experiments with the humanoid robot iCub prove that the sensors can be used to grasp unmodeled, fragile objects

Capacitive technology allows building sensors that are small, compact and have high sensitivity. For this reason it has been widely adopted in robotics. In a previous work we presented a compliant skin system based on capacitive technology consisting of triangular modules interconnected to form a system of sensors that can be deployed on non-flat surfaces. This solution has been successfully adopted to cover various humanoid robots. The main limitation of this and all the approaches based on capacitive technology is that they require to embed a deformable dielectric layer (usually made using an elastomer) covered by a conductive layer. This complicates the production process considerably, introduces hysteresis and limits the durability of the sensors due to ageing and mechanical stress. In this paper we describe a novel solution in which the dielectric is made using a thin layer of 3D fabric which is glued to conductive and protective layers using techniques adopted in the clothing industry. As such, the sensor is easier to produce and has better mechanical properties. Furthermore, the sensor proposed in this paper embeds transducers for thermal compensation of the pressure measurements. We report experimental analysis that demonstrates that the sensor has good properties in terms of sensitivity and resolution. Remarkably we show that the sensor has very low hysteresis and effectively allows compensating drifts due to temperature variations.Comment: IEEE Sensor Journal, Vol. 13, Issue 10, 201

No abstract

The development of robotic manipulators and hands that show dexterity, adaptability, and subtle behavior comparable to human hands is an unsolved research challenge. In this article, we considered the passive dynamics of mechanically complex systems, such as a skeleton hand, as an approach to improving adaptability, dexterity, and richness of behavioral diversity of such robotic manipulators. With the use of state-of-the-art multimaterial three-dimensional printing technologies, it is possible to design and construct complex passive structures, namely, a complex anthropomorphic skeleton hand that shows anisotropic mechanical stiffness. We introduce a concept, termed the "conditional model," that exploits the anisotropic stiffness of complex soft-rigid hybrid systems. In this approach, the physical configuration, environment conditions, and conditional actuation (applied actuation) resulted in an observable conditional model, allowing joint actuation through passivity-based dynamic interactions. The conditional model approach allowed the physical configuration and actuation to be altered, enabling a single skeleton hand to perform three different phrases of piano music with varying styles and forms and facilitating improved dynamic behaviors and interactions with the piano over those achievable with a rigid end effector.

Humans rely on distributed tactile sensing in their hands to achieve robust and dexterous manipulation of delicate objects. Soft robotic hands have received increased attention in recent years due to their adaptability to unknown objects and safe interactions with the environment. However, the integration of distributed sensing in soft robotic hands is lacking. This is largely due to the complexity in the integration of soft sensing solutions with the hands. This paper proposes a novel soft robotic hand that incorporates an active palm and distributed pneumatic tactile sensing in both the fingers and the palm. Multi-material 3D printing allows the tactile sensors to be directly printed on the hand, whereas conventional tactile approaches require the sensors to be attached as part of multiple fabrication procedures. Active degrees of freedom are introduced in the palm to achieve increased dexterity. The proposed hand successfully performed 32 of the 33 Feix taxonomy grasps and all 11 Kapandji thumb opposition poses.

Continuum body structures provide unique opportunities for soft robotics, with the infinite degrees of freedom enabling unconstrained and highly adaptive exploration and manipulation. However, the infinite degrees of freedom of continuum bodies makes sensing (both intrinsically and extrinsically) challenging. To address this, in this paper we propose a model-free method for sensorizing tentacle-like continuum soft-structures using an array of spatially arranged capacitive tactile sensors. By using visual tracking, the relationship between the tactile response and the 3D shape of the continuum soft-structure can be learned. A data set of 15000 random soft-body postures was used, with recorded camera-tracked positions logged synchronously to the tactile sensor responses. This was used to train a neural network which can predict posture. We show it is possible to achieve proprioceptive awareness over all three axis of motion in space, reconstructing the body structure and inferring the soft body head's pose with an average accuracy of ≈ 1mm in comparison to the visual tracked counterpart. To demonstrate the capabilities of the system, we perform random exploration of environments limiting the work-space of the sensorized robot. We find the method capable to autonomously reconstruct the reachable morphology of the environment without the need of external sensing units.

Abstract-During abdominal palpation diagnosis, a medical practitioner would change the stiffness of their fingers in order to improve the detection of hard nodules or abnormalities in soft tissue to maximise haptic information gain via tendons. Our recent experiments using a controllable stiffness robotic probe representing a human finger also confirmed that such stiffness control in the finger can enhance the accuracy of detecting hard nodules in soft tissue. However, the limited range of stiffness achieved by the antagonistic springs variable stiffness joint subject to size constraints made it unsuitable for a wide range of physical examination scenarios spanning from breast to abdominal examination. In this paper, we present a new robotic probe based on a variable lever mechanism (VLM) able to achieve stiffness ranging from 0.64 N.m/rad to 1.06 N.m/rad, that extends the maximum stiffness by around 16 times and the stiffness range by 33 times. This paper presents the mechanical model of the novel probe, the Finite Element (FE) simulation as well as experimental characterization of the stiffness response for lever actuation.

To match the ever increasing standards of fresh products, and the need to reduce waste, we devise an alternative to the destructive and highly variable fruit ripeness estimation by a penetrometer. We propose a fully automatic method to assess the ripeness of mango which is non-destructive, allows the user to test multiple surface areas with a single touch and is capable of dissociating between ripe and non-ripe fruits. A custom-made gripper equipped with a capacitive tactile sensor array is used to palpate the fruit. The ripeness is estimated as mango stiffness extracted through a simplified spring model. We test the framework on a set of 25 mangoes of the Keitt variety, and compare the results to penetrometer measurements. We show it is possible to correctly classify 88% of the mango without removing the skin of the fruit. The method can be a valuable substitute for non-destructive fruit ripeness testing. To the authors knowledge, this is the first robotics ripeness estimation system based on capacitive tactile sensing technology.