No abstract

Microfibrillated cellulose (MFC) was prepared by disintegration of bleached softwood sulphite pulp through mechanical homogenization. The surface of the MFC was modified using different chemical treatments, using reactions both in aqueousand organic solvents. The modified MFC was characterized with fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). Epoxy functionality was introduced onto the MFC surface by oxidation with cerium (IV) followed by grafting of glycidyl methacrylate. The length of the polymer chains could be varied by regulating the amount of glycidyl methacrylate added. Positive charge was introduced to the MFC surface through grafting of hexamethylene diisocyanate, followed by reaction with the amines. Succinic and maleic acid groups could be introduced directly onto the MFC surface as a monolayer by a reaction between the corresponding anhydrides and the surface hydroxyl groups of the MFC.

We have prepared potentially permanent antimicrobial films based on surface-modified microfibrillated cellulose (MFC). MFC, obtained by disintegration of bleached softwood sulfite pulp in a homogenizer, was grafted with the quaternary ammonium compound octadecyldimethyl(3-trimethoxysilylpropyl)ammonium chloride (ODDMAC) by a simple adsorption-curing process. Films prepared from the ODDMAC-modified MFC were characterized by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) and tested for antibacterial activity against the Gram-positive bacterium Staphylococcus aureus and the Gram-negative bacteria Escherichia coli and Pseudomonas aeruginosa. The films showed substantial antibacterial capacity even at very low concentrations of antimicrobial agent immobilized on the surface. A zone of inhibition test demonstrated that no ODDMAC diffused into the surroundings, verifying that the films were indeed of the nonleaching type.

Microbubbles (MBs) are routinely used as contrast agents for ultrasound imaging. The use of ultrasound in combination with MBs has also attracted attention as a method to enhance drug delivery.We have developed a technology platform incorporating multiple functionalities, including imaging and therapy in a single system consisting of MBs stabilized by polyethylene glycol (PEG) coated polymeric nanoparticles (NPs). The NPs, containing lipophilic drugs and/or contrast agents, are composed of the widely used poly(butyl cyanoacrylate) (PBCA) polymer and prepared in a single step. MBs stabilized by these NPs are subsequently prepared by self-assembly of NPs at the MB air/liquid interface. Here we show that these MBs can act as contrast agents for conventional ultrasound imaging. Successful encapsulation of iron oxide NPs inside the PBCA NPs is demonstrated, potentially enabling the NPs/MBs to be used as magnetic resonance imaging (MRI) and/or molecular ultrasound imaging contrast agents. By precise tuning of the applied ultrasound pulse, the MBs burst and the NPs constituting the shell are released. This could result in increased local deposit of NPs into target tissue providing improved therapy and imaging contrast compared to freely distributed NPs.

The method of activated swelling of polymer particles developed by the authors allows the preparation of monodisperse spherical beads of predictable size from 1 to 100 µm in diameter. The polymer particles may be prepared from a number of different monomeric materials and with various morphologies including macroporous structures. The porous beads form the basis for magnetizable monodisperse polymer particles which have magnetic iron oxides distributed as small grains all through the volume of the beads. The magnetic particles are being used extensively for selective cell separation and for immunomagnetic separation within microbiology and molecular biology. A review of recent work within these fields is given. New methods for positive cell separation are announced.

Advances in membrane technologies that combine greatly improved carbon dioxide (CO 2 ) separation efficacy with low costs, facile fabrication, feasible upscaling, and mechanical robustness are needed to help mitigate global climate change. We introduce a hybrid-integrated membrane strategy wherein a high-permeability thin film is chemically functionalized with a patchy CO 2 -philic grafted chain surface layer. A high-solubility mechanism enriches the concentration of CO 2 in the surface layer hydrated by water vapor naturally present in target gas streams, followed by fast CO 2 transport through a highly permeable (but low-selectivity) polymer substrate. Analytical methods confirm the existence of an amine surface layer. Integrated multilayer membranes prepared in this way are not diffusion limited and retain much of their high CO 2 permeability, and their CO 2 selectivity is concurrently increased in some cases by more than ~150-fold.

No abstract

By employing the principles of "activated swelling", monosized, superparamagnetic polymer particles have been prepared ranging in size from 1-100 microns. Both during and after the swelling process, the particles can be modified to meet a series of specific demands making them potentially very interesting for many separation and assay purposes. Using monoclonal antibodies to direct the magnetic beads to their targets, immunomagnetic separation has turned out to be one of the most specific, reliable and, above all, the fastest technique available today to isolate particulate material for further studies. So far, most efforts have been concentrated on methodology for fractionation of cells in suspension, such as removal of tumour cells from bone marrow or isolation of lymphoid cells from peripheral blood. These studies have both established the parameters necessary for optimal performance and at the same time laid the groundwork for future developments making immunomagnetic separation an exciting new tool in many research areas. High speed and specificity are the most conspicuous features of immunomagnetic cell separation. These properties have been exploited in the successful development of a new technique for tissue typing of cells directly from peripheral blood specimens. Both higher sensitivity and specificity have been obtained. The same principles can be used for fast and safe quantification of cell populations and subpopulations in blood and cell suspensions. The functions of, and interactions between, peripheral blood cell populations or subpopulations in the immune response have also been studied with high precision. The significance of direct cell contact on the one hand, and soluble factors on the other, can now be established in detail. Immunomagnetic beads have also been used to study the interaction between various T lymphocyte membrane molecules in the early phases of the activation process. Finally, the usefulness of specially developed particles for the fractionation of subcellular components is described.