Objective:The industrial aluminum production process is addressed. The purpose is to give a short but comprehensive description of the electrolysis cell technology, the raw materials used, and the health and safety relevance of the process.Methods:This article is based on a study of the extensive chemical and medical literature on primary aluminum production.Results:At present, there are two main technological challenges for the process—to reduce energy consumption and to mitigate greenhouse gas emissions. A future step may be carbon dioxide gas capture and sequestration related to the electric power generation from fossil sources.Conclusions:Workers' health and safety have now become an integrated part of the aluminum business. Work-related injuries and illnesses are preventable, and the ultimate goal to eliminate accidents with lost-time injuries may hopefully be approached in the future.

Plasma total homocysteine response was compared in four groups of healthy individuals given orally divided doses of vitamin supplementations for a duration of 5 weeks. The vitamin supplements; A, 0.3 mg folic acid; B, 120 mg vitamin B6; C, combination of 0.3 mg folic acid and 120 mg vitamin B6 or D, 0.6 mg folic acid reduced the concentrations of plasma total homocysteine 20, 17, 32 and 24%, respectively. However, the intergroup comparisons did not show a significant difference in the effects of vitamin supplements. Multivariate analysis with correction for differences in pre-supplement values indicated a significant effect of vitamin B6 supplementation on plasma total homocysteine and serum folate. Our data show that plasma total homocysteine concentrations are reduced with low to medium divided doses of folic acid alone or in combination with vitamin B6.

The number concentration and size distribution of ultrafine particles in a Søderberg and a prebake potroom of an aluminium primary smelter have been measured using a scanning mobility particle spectrometer. The particle morphology was studied by transmission electron microscopy (TEM). The study shows the existence of elevated number concentrations of ultrafine particles in both potrooms. The main source of these particles is likely to be the process of anode changing. The ultrafine particles were measured directly at the source but could also be identified as episodes of high number concentrations in the general background air. Unlike the larger particles belonging to the 50-100 nm mode, the nanoparticle mode could not be detected in the TEM indicating that they may not be stable under the applied sampling conditions and/or the high vacuum in the instrument.

Aerosol particles with aerodynamic diameters between 0.18 and 10 microm were collected in the workroom air of two aluminium smelter potrooms with different production processes (Soderberg and Prebake processes). Size, morphology and chemical composition of more than 2000 individual particles were determined by high resolution scanning electron microscopy and energy-dispersive X-ray microanalysis. Based on chemical composition and morphology, particles were classified into different groups. Particle groups with a relative abundance above 1%(by number) include aluminium oxides, cryolite, aluminium oxides-cryolite mixtures, soot, silicates and sea salt. In both production halls, mixtures of aluminium oxides and cryolite are the dominant particle group. Many particles have fluoride-containing surface coatings or show agglomerations of nanometer-sized fluoride-containing particles on their surface. The phase composition of approximately 100 particles was studied by transmission electron microscopy. According to selected area electron diffraction, sodium beta-alumina (NaAl(11)O(17)) is the dominant aluminium oxide and cryolite (Na(3)AlF(6)) the only sodium aluminium fluoride present. Implications of our findings for assessment of adverse health effects are discussed.