No abstract

The main aim of this study was to develop rice starch (RS), ι-carrageenan (ι-car) based film. Different formulations of RS (1-4%, w/w), ι-car (0.5-2%, w/w) was blended with stearic acid (SA; 0.3-0.9%, w/w) and glycerol (1%, w/w) as a plasticizer. The effect of film ingredients on the thickness, water vapour permeability (WVP), film solubility (FS), moisture content (MC), colour, film opacity (FO), tensile strength (TS), elongation-at-break (EAB) of film was examined. Interactions and miscibility of partaking components was studied by using Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). Hydrocolloid suspension solution of mix polysaccharides imparted a significant impact (p<0.05) on the important attributes of resulting edible film. TS and EAB of film were improved significantly (p<0.05) when ι-car was increased in the film matrix. Formulation F1 comprising 2% ι-car, 2% RS, 0.3% SA, Gly 30% w/w and 0.2% surfactant (tween20) provided film with good physical, mechanical and barrier properties. FT-IR and XRD results reveal that molecular interactions between RS-ι-car have a great impact on the film properties confining the compatibility and miscibility of mixed polysaccharide. Results of the study offers new biodegradable formulation for application on fruit and vegetables.

Summary The aim of this study was to investigate the effect of freeze‐drying, hot air‐drying and vacuum‐drying at 70, 90 and 110 °C, on dried lemon pomace polyphenols and antioxidant capacity. The total phenolic content and antioxidant capacity were higher in lemon pomace dried by hot air or under vacuum than those dried by freeze‐drying and increased as the temperature increased. The highest total flavonoid content was recorded in the pomace dried under vacuum at 70 and 90 °C. Lemon pomace dried by freeze‐drying had the highest neohesperidin content, whereas pomace dried under vacuum at 70 °C had the highest rutin and p‐coumaric acid content. The highest gallic acid content was recorded in the pomace dried by hot air at 110 °C. The results of this study indicate that drying technique should be carefully selected according to the bioactive compounds aimed to be extracted.

A rice starch edible coating blended with sucrose esters was developed for controlling the postharvest physiological activity of Cavendish banana to extend postharvest quality during ripening at ± 2°C. Coating effectiveness was assessed against changes in fruit physiochemical parameters such as weight loss, titratable acidity, total soluble solids, flesh fruit firmness, ion leakage, colour change, respiration, ethylene production, chlorophyll degradation and starch conversion were determined. The topography of coating material on the fruit surface was evaluated by scanning electron microscope (SEM). Surface morphology studies highlighted the binding compatibility of the coating matrix with the fruit peel character and formed a continuous uniform layer over the fruit surface. The results showed that the coating was effective in delaying ethylene biosynthesis and reducing respiration rate. Other factors impacting included delayed chlorophyll degradation, reduced weight loss and retention of fruit firmness for the first six days, all of which improved the commercial value of the fruit. The shelf life of coated fruit was prolonged for 12 days in comparison with the untreated control which ripened within seven days and lost marketability after Day 6. The pilot study demonstrates the effectiveness of a starch-based edible coating formulation for improving the ambient storage capacity of banana fruit.

The effect of different combinations of maltodextrin (MD) coating agents (MD, MD + soybean protein, and MD + ι-carrageenan) on the encapsulation of lemon by-product aqueous extracts using freeze-drying and spray-drying were investigated. The total phenolic content (TPC), total flavonoid content (TFC), and ferric ion reducing antioxidant power (FRAP) of the microparticles were evaluated. Freeze-drying with the mixture of MD + soybean protein resulted in the highest retention of TPC, TFC, and FRAP (1.66 ± 0.02 mg GAE/g d.b., 0.43 ± 0.02 mg CE/g d.b., and 3.70 ± 0.05 mM TE/g, respectively). Freeze-drying resulted in microparticles with lower moisture content (MC) and water activity (aw) than those produced by spray-drying. Specifically, the MC and aw of the microparticles produced by freeze-drying ranged from 1.15 to 2.15% and 0.13 to 0.14, respectively, while the MC and aw of the microparticles produced by spray-drying ranged from 6.06% to 6.60% and 0.33 to 0.40, respectively. Scanning electron microscopy revealed that spray-drying resulted in the formation of spherical particles of different sizes regardless of the type of coating agent. Although freeze-drying resulted in microparticles with amorphous glassy shapes, the mixture of MD + soybean protein resulted in the formation of spherical porous particles. X-ray diffraction revealed a low degree of crystallinity for the samples produced by both techniques.