Replacing flammable organic liquid electrolytes with solid Li-ion conductors is a promising approach to realize safe rechargeable batteries with high energy density. Composite solid electrolytes, which are comprised of a polymer matrix with ceramic Li-ion conductors dispersed inside, are attractive, since they combine the flexibility of polymer electrolytes and high ionic conductivities of ceramic electrolytes. However, the high conductivity of ceramic fillers is largely compromised by the low conductivity of the matrix, especially when nanoparticles (NPs) are used. Therefore, optimizations of the geometry of ceramic fillers are critical to further enhance the conductivity of composite electrolytes. Here we report the vertically aligned and connected LiAlTi(PO) (LATP) NPs in the poly(ethylene oxide) (PEO) matrix to maximize the ionic conduction, while maintaining the flexibility of the composite. This vertically aligned structure can be fabricated by an ice-templating-based method, and its conductivity reaches 0.52 × 10 S/cm, which is 3.6 times that of the composite electrolyte with randomly dispersed LATP NPs. The composite electrolyte also shows enhanced thermal and electrochemical stability compared to the pure PEO electrolyte. This method opens a new approach to optimize ion conduction in composite solid electrolytes for next-generation rechargeable batteries.

Traditional organic synthesis relies heavily on organic solvents for a multitude of tasks, including dissolving the components and facilitating chemical reactions, because many reagents and reactive species are incompatible or immiscible with water. Given that they are used in vast quantities as compared to reactants, solvents have been the focus of environmental concerns. Along with reducing the environmental impact of organic synthesis, the use of water as a reaction medium also benefits chemical processes by simplifying operations, allowing mild reaction conditions, and sometimes delivering unforeseen reactivities and selectivities. After the "watershed" in organic synthesis revealed the importance of water, the development of water-compatible catalysts has flourished, triggering a quantum leap in water-centered organic synthesis. Given that organic compounds are typically practically insoluble in water, simple extractive workup can readily separate a water-soluble homogeneous catalyst as an aqueous solution from a product that is soluble in organic solvents. In contrast, the use of heterogeneous catalysts facilitates catalyst recycling by allowing simple centrifugation and filtration methods to be used. This Review addresses advances over the past decade in catalytic reactions using water as a reaction medium.

No abstract

An important requirement of battery anodes is the processing step involving the formation of the solid electrolyte interphase (SEI) in the initial cycle, which consumes a significant portion of active lithium ions. This step is more critical in nanostructured anodes with high specific capacity, such as Si and Sn, due to their high surface area and large volume change. Prelithiation presents a viable approach to address such loss. However, the stability of prelithiation reagents is a big issue due to their low potential and high chemical reactivity toward O and moisture. Very limited amount of prelithiation agents survive in ambient air. In this research, we describe the development of a trilayer structure of active material/polymer/lithium anode, which is stable in ambient air (10-30% relative humidity) for a period that is sufficient to manufacture anode materials. The polymer layer protects lithium against O and moisture, and it is stable in coating active materials. The polymer layer is gradually dissolved in the battery electrolyte, and active materials contact with lithium to form lithiated anode. This trilayer-structure not only renders electrodes stable in ambient air but also leads to uniform lithiation. Moreover, the degree of prelithiation could vary from compensating SEI to fully lithiated anode. With this strategy, we have achieved high initial Coulombic efficiency of 99.7% in graphite anodes, and over 100% in silicon nanoparticles anodes. The cycling performance of lithiated anodes is comparable or better than those not lithiated. We also demonstrate a LiTiO/lithiated graphite cell with stable cycling performance. The trilayer structure represents a new prelithiation method to enhance performance of Li-ion batteries.