X-ray detectors are demonstrated using composite films of lead-free Cs2AgBiBr6 halide double perovskite embedded in a polymer matrix as the X-ray photoconductors.

Halide perovskites have great potential for use in high‐performance light‐emitting diodes (LEDs) and displays. Here, a perovskite LEDs (PeLEDs) fabricated directly on an elastomer substrate, in which every single layer in the device from bottom anode to top cathode is patterned solely using a highly scalable inkjet printing process, is reported. Compared to PeLEDs made using conventional microfabrication processes, the printing process significantly shortens the fabrication time by at least tenfold (from over 5 h to less than 25 min). The all‐printed PeLEDs have a novel 4‐layer structure (bottom electrode, perovskite emissive layer, buffer layer, top electrode) without separate electron or hole transporting layers. For flexible PeLEDs printed directly in ambient conditions, a turn‐on voltage, maximum luminance intensity, and maximum current efficiency of 3.46 V, 10227 cd m−2, and 2.01 cd A−1, respectively, is achieved. The devices also exhibit excellent robustness and stability even when bent to a curvature radius of 2.5 mm. The reported device structure and fabrication processes can enable high‐performance flexible PeLEDs to be manufactured over a larger area at extremely low cost and fast speed, which can facilitate the adoption of the promising PeLED technology in the emerging foldable displays, smart wearables, and many other applications.

No abstract