Combined high and low cycle fatigue (CCF) generally induces the failure of aircraft gas turbine attachments. Based on the aero-engine load spectrum, accurate assessment of fatigue damage due to the interaction of high cycle fatigue (HCF) resulting from high frequency vibrations and low cycle fatigue (LCF) from ground-air-ground engine cycles is of critical importance for ensuring structural integrity of engine components, like turbine blades. In this paper, the influence of combined damage accumulation on the expected CCF life are investigated for turbine blades. The CCF behavior of a turbine blade is usually studied by testing with four load-controlled parameters, including high cycle stress amplitude and frequency, and low cycle stress amplitude and frequency. According to this, a new damage accumulation model is proposed based on Miner’s rule to consider the coupled damage due to HCF-LCF interaction by introducing the four load parameters. Five experimental datasets of turbine blade alloys and turbine blades were introduced for model validation and comparison between the proposed Miner, Manson-Halford, and Trufyakov-Kovalchuk models. Results show that the proposed model provides more accurate predictions than others with lower mean and standard deviation values of model prediction errors.

Cereal Chem. 76(4):541-547Semolina from four durum wheat genotypes (cvs. Ben, Munich, Rugby, and Vic) were processed into spaghetti that was dried by low (LT), high (HT), and ultrahigh (UHT) temperature drying cycles. Starch was isolated from dried pasta and unprocessed wheat and semolina references. Pasta-drying cycles had no significant effect on the amylose content of starches. Significant increases in enzyme-resistant starch were observed in HT-and UHT-dried pasta (2.27 and 2.51%, respectively) compared with LT-dried pasta (1.68%). Differential scanning calorimetry (DSC) gelatinization characteristics of pasta starches showed a significantly narrow range (T r ), but no changes in onset and peak temperatures (T o and T p , respectively) and gelatinization enthalpy (∆H 1 ) were observed. When compared with unprocessed reference samples (wheat and semolina), all pasta starches shifted to higher gelatinization T o and T p , with narrow T r and no changes in ∆H 1 . The second endothermic DSC peak indicated no increase in amylose-lipid complexation (∆H 2 ) due to drying cycle. Starches isolated from LT and HT pasta exhibited lower peak viscosities than those from UHT-dried pasta. Genotypes Ben and Rugby demonstrated higher pasting temperature and lower peak and breakdown viscosities than Vic and Munich.

Discrete element modelling has been used to investigate the micro mechanics of isotropic normal compression. One-dimensional (1D) normal compression has previously been modelled in three dimensions using an oedometer and a large number of particles and without the use of agglomerates, and it was shown that the compression index was solely related to the strengths of the particles as a function of size. The same procedure is used here to model isotropic normal compression. The fracture of a particle is governed by the octahedral shear stress within the particle (due to the multiple contacts) and a Weibull distribution of strengths. The octahedral shear stresses, due to local anisotropic stresses within a sample with isotropic boundary stresses, are shown to give rise to a normal compression line (NCL) and the evolution of a distribution of particle sizes. The compression line is parallel to the 1D NCL in log e-log p space, in agreement with traditional critical state soil mechanics and confirming that the compression index is solely a function of the size effect on average particle strength, which determines the hardening law for the material. The paper shows, for the first time, how local octahedral shear stresses induced in the particles within the sample generate an isotropic normal (clastic) compression line.

No abstract