Carbon nanotube-Si and graphene-Si solar cells have attracted much interest recently owing to their potential in simplifying manufacturing process and lowering cost compared to Si cells. Until now, the power conversion efficiency of graphene-Si cells remains under 10% and well below that of the nanotube-Si counterpart. Here, we involved a colloidal antireflection coating onto a monolayer graphene-Si solar cell and enhanced the cell efficiency to 14.5% under standard illumination (air mass 1.5, 100 mW/cm(2)) with a stable antireflection effect over long time. The antireflection treatment was realized by a simple spin-coating process, which significantly increased the short-circuit current density and the incident photon-to-electron conversion efficiency to about 90% across the visible range. Our results demonstrate a great promise in developing high-efficiency graphene-Si solar cells in parallel to the more extensively studied carbon nanotube-Si structures.
Spring-like carbon nanotube ropes consisting of perfectly arranged loops are fabricated by spinning single-walled nanotube films, and can sustain tensile strains as high as 285%.
Design and fabrication of structurally optimized electrode materials are important for many energy applications such as supercapacitors and batteries. Here, we report a three-component, hierarchical, bulk electrode with tailored microstructure and electrochemical properties. Our supercapacitor electrode consists of a three-dimensional carbon nanotube (CNT) network (also called sponge) as a flexible and conductive skeleton, an intermediate polymer layer (polypyrrole, PPy) with good interface, and a metal oxide layer outside providing more surface area. These three components form a well-defined core-double-shell configuration that is distinct from simple core-shell or hybrid structures, and the synergistic effect leads to enhanced supercapacitor performance including high specific capacitance (even under severe compression) and excellent cycling stability. The mechanism study reveals that the shell sequence is a key factor; in our system, the CNT-PPy-MnO2 structure shows higher capacitance than the CNT-MnO2-PPy sequence. Our porous core-double-shell sponges can serve as freestanding, compressible electrodes for various energy devices.
Combining carbon nanotubes (CNTs), graphene or conducting polymers with conventional silicon wafers leads to promising solar cell architectures with rapidly improved power conversion efficiency until recently. Here, we report CNT-Si junction solar cells with efficiencies reaching 15% by coating a TiO2 antireflection layer and doping CNTs with oxidative chemicals, under air mass (AM 1.5) illumination at a calibrated intensity of 100 mW/cm2 and an active device area of 15 mm2. The TiO2 layer significantly inhibits light reflectance from the Si surface, resulting in much enhanced short-circuit current (by 30%) and external quantum efficiency. Our method is simple, well-controlled, and very effective in boosting the performance of CNT-Si solar cells.
We report a metal-insulator-semiconductor heterojunction solar cell by depositing a carbon nanotube film onto silicon substrate, followed by acid oxidation of the Si surface to form a thin oxide layer at the junction interface. The nanotube-oxide-Si solar cells with polymer encapsulation show stable efficiencies of above 10%, owing to enhanced photon absorption, inhibited charge recombination, and reduced internal resistance. Parallel and series connections without sacrificing cell efficiencies were demonstrated.
Flexible all-solid-state supercapacitors based on graphene films with different gel electrolytes are demonstrated. During the bending and cycling of graphene-based solid-state supercapacitor, the stability was maintained without sacrificing the electrochemical performance.
Flexible all-solid-state supercapacitors based on graphene fibers are demonstrated in this study. Surface-deposited oxide nanoparticles are used as pseudo-capacitor electrodes to achieve high capacitance. This supercapacitor electrode has an areal capacitance of 42 mF cm(-2), which is comparable to the capacitance for fiber-based supercapacitors reported to date. During the bending and cycling of the fiber-based supercapacitor, the stability could be maintained without sacrificing the electrochemical performance, which provides a novel and simple way to develop flexible, lightweight and efficient graphene-based devices.
Deposition of nanostructures such as carbon nanotubes on Si wafers to make heterojunction structures is a promising route toward high efficiency solar cells with reduced cost. Here, we show a significant enhancement in the cell characteristics and power conversion efficiency by growing a silicon oxide layer at the interface between the nanotube film and Si substrate. The cell efficiency increases steadily from 0.5% without interfacial oxide to 8.8% with an optimal oxide thickness of about 1 nm. This systematic study reveals that formation of an oxide layer switches charge transport from thermionic emission to a mixture of thermionic emission and tunneling and improves overall diode properties, which are critical factors for tailoring the cell behavior. By controlled formation and removal of interfacial oxide, we demonstrate oscillation of the cell parameters between two extreme states, where the cell efficiency can be reversibly altered by a factor of 500. Our results suggest that the oxide layer plays an important role in Si-based photovoltaics, and it might be utilized to tune the cell performance in various nanostructure-Si heterojunction structures.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.