An inverse heat transfer model based on Salp Swarm optimization algorithm is developed for prediction of heat flux at the hot faces of a mould in thin slab continuous casting. The industrial mould considered in this work is a funnel-shaped mould having complex arrangement of cooling slots and holes. Significant variations of heat flux along the casting direction, as well as across the width are observed. Subsequently, the obtained heat flux profile estimated by the inverse method is used to analyse the fluid flow and thermal characteristics of the solidifying steel strand inside the mould. Three different recirculatory zones are present due to molten steel flow, affecting the thermal and solidification characteristics significantly. The effect of these recirculatory flows on remelting phenomenon, and consequent formation of thinner shell at the mould outlet leading to quality control issues in the casting process have been discussed. Another practical issue of depression in the wide face shell thickness at the mould outlet has been identified, and its cause has been related to the location of the Submerged Entry Nozzle and the high speed of the molten steel inflow.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.