Background: Presented information about the welding process and equipment, focusing on the emission of electromagnetic field (EMF) with levels significant in terms of the labor safety regulations in force in Poland -the ordinances of the Minister of Family, Labour and Social Policy that came into force on June 27, 2016 and June 29, 2016 -emerged due to harmonization with European Union directive 2013/35/EU of 26 June 2013 of the European Parliament and the Council. They presented methods of determination of the EMF distribution in the welding machine surroundings and analyzed the background knowledge from the available literature. Material and Methods: The subject of the analysis included popular high frequency welders widely used in the industry. Electromagnetic field measurements were performed in the welder operating place (in situ) during machine normal operations, using measurement methods accordant with labor safety regulations in force in Poland and according to the same guidelines, the EMF distributions and parameters having been described. Results: They presented various scenarios of particular, real examples of excessive exposure to EMF in the dielectric welder surroundings and showed solutions, ranging from simple and costless and ending on dedicated electromagnetic shielding systems, which allowed to reduce EMF exposure in some cases of more than 80% (protection zone ranges) or eliminate dangerous zone presence. Conclusions: It has shown that in the dielectric welders surrounding, significant EMF strength levels may be the result of errors or omissions which often occur during development, installation, operation or modification of welding machines. It has allowed to present the measures that may significantly reduce the exposure to EMF of workers in the welder surroundings. The role of accredited laboratories in helping in such cases was underlined. Med Pr 2017;68(6):693-703
StreszczenieWstęp: W artykule przedstawiono charakterystykę źródła pola elektromagnetycznego (PEM), jakim jest stacja bazowa (base station -BS) telefonii komórkowej. Opisano najczęściej spotykane konfiguracje systemowe wraz z ich budową i omówiono specyfikę promieniowanego PEM w zależności od sposobu dostępu do usług telekomunikacyjnych i parametrów transmisji radiowej. Poświę-cono także uwagę antenom, jakie są montowane na masztach BS i podano ich typowe parametry. Materiał i metody: Analizie poddano wpływ poszczególnych składowych pola wieloczęstotliwościowego, jakie najczęściej jest spotykane w otoczeniu BS, na wypadkowe natężenie PEM mierzone za pomocą popularnych mierników szerokopasmowych. Przedstawiono przykładowe charakterystyki najczęściej spotykanych sond PEM i 2 scenariusze pomiarowe: w jednym źródłem PEM była wielosystemowa stacja bazowa z mikrofalowymi liniami radiowymi, w drugim -stacja bez linii radiowych. Wyniki: Przedstawiono metodę pomiaru wieloczęstotli-wościowego PEM za pomocą 2 sond szerokopasmowych, która pozwala na znaczne zminimalizowanie niepewności pomiaru. Wzory i przekształcenia, za których pomocą można obliczyć rzeczywiste natężenie PEM w otoczeniu źródeł wieloczęstotliwościowych, zweryfikowano w warunkach laboratoryjnych na specjalnym stanowisku wzorcowym wieloczęstotliwościowego PEM oraz w warunkach rzeczywistych -podczas wykonywania pomiaru istniejącej stacji bazowej z mikrofalowymi liniami radiowymi. Wnioski: Metodykę pomiaru natężenia PEM w otoczeniu stacji bazowych z mikrofalowymi liniami radiowymi zwalidowano w warunkach zarówno laboratoryjnych, jak i rzeczywistych, co pozwoliło w znacznym stopniu ograniczyć niepewność pomiaru tak specyficznego źródła PEM. Jest to najbardziej optymalne podejście do przeprowadzenia oceny ekspozycji na PEM w otoczeniu BS. Alternatywną metodą oceny jest metoda ostrożności (o znacznie większej niepewności pomiaru) i metoda wyłączenia jednego ze źródeł (o bardziej skomplikowanej procedurze pomiarowej). Med. Pr. 2015;66(5):701-712 Słowa kluczowe: metrologia pola elektromagnetycznego, pasmo E, ekspozycja środowiska, bezpieczeństwo pracy w polach elektromagnetycznych, niepewność pomiaru, stacje bazowe telefonii komórkowej Abstract Background: This paper presents the characteristics of the mobile phone base station (BS) as an electromagnetic field (EMF) source. The most common system configurations with their construction are described. The parameters of radiated EMF in the context of the access to methods and other parameters of the radio transmission are discussed. Attention was also paid to antennas that are used in this technology. Material and Methods: The influence of individual components of a multi-frequency EMF, most commonly found in the BS surroundings, on the resultant EMF strength value indicated by popular broadband EMF meters was analyzed. The examples of metrological characteristics of the most common EMF probes and 2 measurement scenarios of the multisystem base station, with and without microwave relays, are shown. Results: The presen...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.