O conteúdo dos artigos e seus dados em sua forma, correção e confiabilidade são de responsabilidade exclusiva dos autores. 2018 Permitido o download da obra e o compartilhamento desde que sejam atribuídos créditos aos autores, mas sem a possibilidade de alterá-la de nenhuma forma ou utilizá-la para fins comerciais.
A presente obra demonstra como o avanço tecnológico impactou a área de Ciências Exatas, fazendo com que os seus profissionais, presentes em inúmeros setores, utilizassem os recursos disponíveis como aliados no desenvolvimento de suas atividades. Dentro deste contexto, apresentamos dezoito capítulos voltados ao estudo e à análise do avanço da tecnologia no campo das diversas profissões por elas abarcadas, bem como as vantagens de investir em recursos tecnológicos que se apresentem precisos, minimizando eventuais desperdícios, falhas, culminando, outrossim, em uma maior organização e produtividade, reconhecendo a necessidade da existência de profissionais devidamente qualificados, que se amoldem aos novos padrões apresentados pelo mercado de trabalho. A partir da leitura dos capítulos, verificar-se-á a multidisciplinariedade da ciência e tecnologia e, ainda, auxiliará a compreensão dos fundamentos para que possa ocorrer seu desenvolvimento de forma aliada aos processos manuais já existentes em nossa sociedade. Boa leitura.
Este trabalho tem como objetivo analisar e avaliar o efeito da taxa de deposição da massa/tempo sobre os níveis de emissão dos gases CO e CO2 no processo de soldagem com arame tubular. A relevância se torna necessária para verificar a correta regulagem dos parâmetros de soldagens e o estudo dos efeitos destes gases no processo tubular. Foi utilizado o arame tubular de Ø1,2mm com proteção gasosa 100%CO2 e Ar+25%CO2, mantendo-se fixo a corrente em 134±5A, velocidade de alimentação 4m/mim, velocidade de soldagem 12cm/mim, vazão do gás 12l/mim, variando somente à DBPC entre 12 e 13mm. No estudo foram medidos os gases CO e CO2 na posição vertical ±30cm da peça no sentido vertical e na posição da sonda instalada na região de respiração do soldador a ±70cm da região da soldagem. Foi feita a parametrização para obtenção da maior taxa de deposição e um bom acabamento dos cordões através das tensões 23V,24V e 26V. Os resultados mostraram que a taxa de deposição é diretamente proporcional a geração de gases, que a mesma aumentou através da corrente, tensão, da DBCP e que a taxa de deposição foi maior na mistura gasosa Ar+25%CO2. Também houve maior geração de CO nas duas posições de soldagem utilizando os dois tipos de gases, os valores gerados de CO chegaram a valores acima dos limites da NR-15 (39ppm) e da OSHA (50ppm), enquanto que só houve geração de CO2 na posição de ± 30cm da peça, com gás de proteção de 100%CO2.
Several works have shown the influence of parameters and shielding gases on the generation of fumes in MIG/MAG welding, but little has been shown on the emission of toxic and asphyxiating gases. This work aims to evaluate the effect of shielding gas composition on gas emission levels in MIG/MAG welding, using pure CO2 and mixtures of Argon with CO2, maintaining the same average current. It was found that the values of CO2 generation in the data acquired in tests with 100%CO2 shielding gas varied with limits above those allowed by NR-15 and OSHA. The data referring to the generation of CO2 during tests with Ar+25%CO2 did not exceed these limits. For CO generation, tests with a voltage of 19V did not exceed the limits of NR-15 and OSHA, for both shielding gases, with the exception of voltages of 21V and 23V.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.