ResumenEl objetivo de este trabajo fue evaluar el efecto térmico residual generado luego del uso en ciclos consecutivos del equipo de Alta Presión Hidrostática (APH) en tres posiciones internas (superior, central e inferior) mediante la cuantificación del contenido de sulfhidrilos libres [SH-L] de α-amilasa de Aspergillus oryzae expresado en μmol de SH/g de proteína. La potencial utilización de la cuantificación de [SH-L] de la enzima como indicador de tratamiento de APH permite medir en forma indirecta el efecto térmico durante el proceso. En el ensayo se utilizó un equipo de APH de 2L con alimentación inferior del fluido de presurización (agua:propilenglicol-70:30v/v). En cada ciclo, el fluido a temperatura ambiente fue comprimido hasta alcanzar la presión deseada (605 MPa), y el nivel de presión se mantuvo durante cinco minutos con posterior despresurización. El ciclo fue repetido tres veces en forma consecutiva. Se realizó un ANOVA (α=0,05) correspondiente a un diseño factorial de dos factores: posiciones y ciclos consecutivos, con tres niveles cada uno, y con cuatro repeticiones para el diseño completo. Se obtuvieron diferencias significativas en la interacción ciclo*posición (p valor=0,001) y el ciclo (p valor=0,021). Estos resultados evidencian el efecto del calor generado durante la compresión adiabática, afectando la historia térmica de la α-amilasa. Dada su sensibilidad, esta enzima podría ser considerada a futuro como un indicador de procesos de APH que permite evaluar la diferencia entre las muestras procesadas durante los ciclos, y que evidencia el perfil térmico generado dentro del equipo. Palabras clave: Altas Presiones, contenido de sulfhidrilos libres, amilasa. AbstractWe evaluated the residual thermal effect generated by the consecutive High Hydrostatic Pressure (HHP) cycles relative to the position (upper, central and lower) inside a high pressure vessel determining the free sulfhydryl groups [F-SH] from pressurized α-amylase Aspergillus oryzae expressed in μmol SH/g protein. This methodology could represent a potential indicator of HHP treatment, allowing to measure in an indirect way the thermal effect during the process. Assays were carried out using a 2L stabilized lab scale equipment, where pressurizing medium (water-propilenglycol:70-30%) was injected at room temperature from the bottom of the vessel. For each cycle, the fluid at room temperature was compressed until reaching the desired pressure (605 MPa), maintained for five minutes, followed by depressurization. The cycle was repeated three consecutive times. The free sulfhydryl content was assayed statistically using one-way ANOVA (α=0,05) for a factorial design of two factors: positions and consecutive cycles, with three levels, and four repetitions for the complete design. Significant differences were obtained in the interaction cycles*position (pvalue = 0,001) and cycles (pvalue = 0,021). These results demonstrate the effect of the heat generation during adiabatic compression, affecting the thermal history of the α-amylase. Due to...
No abstract
En el presente trabajo de Tesis Doctoral se estudió a nivel experimental y computacional el perfil térmico del cilindro de un equipo de Alta Presión Hidrostática (APH) de escala laboratorio. Se evaluaron las temperaturas del fluido de compresión, agua-propilenglicol (70:30 v/v), en diferentes posiciones de la canasta con y sin carga de producto a 200, 400 y 600 MPa durante tres usos consecutivos del equipo. Asimismo, se analizó el contenido de sulfhidrilos libres de una enzima fúngica en muestras procesadas a 600 MPa como una medida indirecta del efecto térmico. El estudio computacional contempló la modificación de la aplicación compressibleInterFoam desarrollada en OpenFOAM® para simular un flujo multifásico compresible y se adaptó para modelar las paredes del cilindro del equipo como un fluido de muy alta viscosidad, y de esta manera simular el problema acoplado de transferencia térmica fluido-sólido. Se simuló el proceso a 600 MPa, con y sin carga de producto para el primer uso del equipo y luego su régimen térmico. La labor realizada en esta etapa permitió comprender e interpretar el efecto observado a nivel experimental, a diferentes posiciones en el interior del cilindro, y carga durante su procesamiento por APH.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.